PROEL EIKON DM585 Professional Dynamic Microphone

1. Introduktion

The Proel EIKON DM585 is a professional high-sensitivity cardioid dynamic microphone designed for vocal applications, including singing and karaoke. It features a high dynamic moving coil capsule and a cardioid polar response, making it particularly resistant to feedback.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your EIKON DM585 microphone to ensure optimal performance.

2. Funktioner

• Transducer type: Moving Coil
• Polar mønster: Cardioid, highly resistant to feedback
• Frekvensrespons: 50-17000 Hz (+/- 3 dB)
• Sensitivity (1 KHz): -52 dB +/- 3dB
• Impedans: 400 Ohm
• Konnektor: 3-benet han XLR
• Ansøgninger: Specifically indicated for vocal use (voice, singing, karaoke)

3. Hvad er der i æsken

Ved udpakning skal du kontrollere, at alle nedenstående varer er til stede:

• 1 x Proel EIKON DM585 Microphone (Beige-Gold)
• 1 x Microphone Holder (screw-on type)
• 1 x bæretaske

Note: An audio connection cable (XLR) and a microphone stand are not included and must be purchased separately.

4. Opsætning

Figure 4.1: Proel EIKON DM585 Microphone. This image shows the beige-gold colored microphone with a mesh grille at the top, and the "EIKON" brand name visible on the body.

Figure 4.2: Included Microphone Holder. This image displays the black plastic microphone holder designed to attach the microphone to a stand.

1. Attach Microphone Holder: Screw the included microphone holder onto a compatible microphone stand (not included).
2. Indsæt mikrofon: Carefully insert the Proel EIKON DM585 microphone into the holder. Ensure it is securely seated.
3. Tilslut XLR-kabel: Connect a 3-pin male XLR audio cable (not included) to the microphone's XLR output.
4. Tilslut til lydenhed: Connect the other end of the XLR cable to an appropriate input on your audio mixer, amplifier, or interface.
5. Tænd lydenhed: Ensure your audio device is powered on and ready to receive input.

5. Betjeningsvejledning

The EIKON DM585 microphone is designed for straightforward operation. It does not feature an on-off switch.

1. Placering: For optimal vocal pickup, position the microphone typically 1 to 6 inches (2.5 to 15 cm) from the sound source (e.g., mouth). Experiment with distance to find the best sound for your voice and environment.
2. Forstærkningsjustering: Adjust the input gain on your connected audio device (mixer, interface) to achieve a strong signal without distortion. Monitor your audio levels to prevent clipping.
3. Feedback kontrol: Due to its cardioid pattern, the microphone is resistant to feedback. However, always aim the microphone away from speakers or monitors to minimize the chance of feedback.
4. Anvendelse: Speak or sing directly into the top of the microphone, where the grille is located, for the clearest sound.

6. Vedligeholdelse

Korrekt pleje vil forlænge din mikrofons levetid og ydeevne.

• Opbevaring: Always store the microphone in its included carrying case when not in use. This protects it from dust, moisture, and physical damage.
• Rensning: Clean the microphone body with a soft, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
• Håndtering: Avoid dropping the microphone or subjecting it to strong impacts. Do not expose it to extreme temperatures, high humidity, or direct sunlight for prolonged periods.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For detailed warranty information, technical support, or any further inquiries regarding your Proel EIKON DM585 microphone, please contact the manufacturer directly.

You can find more information and contact details by visiting the official PROEL store on Amazon:

Visit PROEL Store on Amazon

As per legal information, it is suggested to contact the manufacturer for more information on a specific item.