1. Introduktion
The NICE P1S Hand Transmitter is a compact and efficient remote control designed for various applications, primarily for door or gate systems. Operating at a frequency of 433.92 MHz, this transmitter features 5 distinct keys for versatile control. It is supplied with batteries and comprehensive instructions, ensuring a straightforward setup and programming process without the need for specialized equipment.
2. Opsætning og batteriinstallation
The NICE P1S Hand Transmitter comes with batteries included, making it ready for use after initial setup. Follow these steps for battery installation or replacement:
- Find batterirummet på bagsiden af senderen.
- Åbn dækslet til rummet.
- Insert two 1.5V AAA (LR03) alkaline batteries, ensuring correct polarity (+/-).
- Luk batterirummets dæksel forsvarligt.
Note: The transmitter requires 2 AA batteries, which are included. Ensure to use alkaline batteries for optimal performance.
3. Betjeningsvejledning
The NICE P1S Hand Transmitter is designed for simple operation with its 5-button interface. Its radio frequency connectivity allows for a maximum range of 10 meters under optimal conditions.
3.1 Programming the Transmitter
The programming type for this device is a one-time registration with the receiver. Refer to your receiver's manual for specific instructions on how to put it into programming mode and register the new transmitter.
3.2 Knapfunktioner
The transmitter features 5 buttons. The specific function of each button (e.g., open, close, stop) will depend on how it is programmed with your door or gate system. Typically, the larger buttons control primary functions, while smaller buttons may control auxiliary features or specific modes.
Image of the NICE P1S Hand Transmitter, a white rectangular remote control with five grey buttons. The top button has an upward arrow, the middle button has a square, and the third button has a downward arrow. Below these are two smaller rows of circular buttons. The 'Nice' logo is visible at the bottom right.
4. Vedligeholdelse
The NICE P1S Hand Transmitter requires minimal maintenance. The primary maintenance task is battery replacement when the transmitter's performance diminishes or it stops responding.
- Udskiftning af batteri: Replace batteries as described in Section 2 when the indicator light (if present) signals low battery, or the range decreases significantly.
- Rensning: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using abrasive cleaners or solvents.
- Opbevaring: Store the transmitter in a dry place, away from extreme temperatures and direct sunlight.
5. Fejlfinding
If you experience issues with your NICE P1S Hand Transmitter, consider the following common solutions:
- Senderen svarer ikke:
- Kontroller, om batterierne er korrekt isat og ikke er opbrugt. Udskift om nødvendigt.
- Ensure you are within the maximum operating range (10 meters) of the receiver.
- Verify that the transmitter is properly programmed with the receiver. Re-program if needed.
- Reduceret driftsområde:
- Udskift batterierne.
- Check for obstructions between the transmitter and the receiver (e.g., thick walls, metal objects).
- Ensure there is no strong radio interference in the area.
If problems persist, consult a qualified technician or contact NICE customer support.
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | PÆN |
| Model | P1S |
| Frekvens | 433.92 MHz |
| Antal knapper | 5 |
| Batteritype | 2 x 1.5V AAA (LR03) Alkaline |
| Dimensioner (L x B x H) | 1.7 x 0.6 x 0.2 cm |
| Varens vægt | 140 gram |
| Forbindelsesteknologi | Radiofrekvens |
| Maksimal rækkevidde | 10 meter |
| Controller type | Knap kontrol |
7. Garanti og support
The NICE P1S Hand Transmitter comes with a 1-year warranty, which includes the battery and instructions. For technical support, warranty claims, or further assistance, please refer to the contact information provided with your product packaging or visit the official NICE webwebsted.
For more information, you may visit the product page: NICE P1S on Amazon.se
