Aiphone GT-1A Multi-Tenant Intercom Audio Lejerstation Brugermanual

1. Introduktion og overview

The Aiphone GT-1A is an audio-only tenant station designed for integration into the Aiphone GT Series Multi-Unit Entry System. This device facilitates hands-free audio communication between a tenant and a visitor at the building entrance. It is equipped with essential functions for managing visitor access and communication within a multi-tenant environment.

Key capabilities include two-way audio communication, door release activation, and an optional service button. The GT-1A also supports calling concierge or security guard stations, activating a light during communication with a visitor, and receiving emergency tones from pull cords or panic buttons. Its design is surface-mounted, offering a slim and streamlined profile. Up to four GT-1A units can be installed within a single tenant location.

2. Funktioner

The Aiphone GT-1A Audio Tenant Station offers the following features:

• Hands-free (VOX) or Push-to-Talk (Simplex) Communication: Provides flexible communication options with visitors.
• Døråbnerfunktion: Allows tenants to remotely unlock the entrance door for visitors.
• Security Guard/Concierge Call Button: Enables direct communication with building security or concierge services.
• Optional Service Buttons: Supports additional customizable functions.
• Call Tone and Communication Volume Control: Adjustable settings for personalized audio levels.
• Multiple Tenant Stations per Location: Supports up to four GT-1A units within a single resident location.
• Varying Ring Tones: Distinct ring tones for calls originating from the entrance panel, concierge, or doorbell.

3. Opsætning og installation

The Aiphone GT-1A is designed for surface mounting. Due to the nature of intercom systems and electrical connections, professional installation by a qualified technician is strongly recommended to ensure proper functionality, system integration, and compliance with local electrical codes.

3.1 Overvejelser før installation

• Ensure the installation location is within the specified wiring distance from the GT series master station or distribution unit.
• Verify that the power supply meets the system requirements.
• Confirm compatibility with existing GT series components.

3.2 Montering

The unit is typically mounted on a wall at a convenient height for user access. Mounting hardware and specific wiring diagrams are provided with the product for professional installers. Refer to the detailed installation manual for wiring connections to the GT series bus line and power supply.

4. Betjeningsvejledning

4.1 Besvarelse af et opkald

1. When a visitor calls from the entrance panel, the GT-1A will ring with a distinct tone.
2. Tryk på TALE button once to establish hands-free communication with the visitor.

4.2 Kommunikationstilstande

• Hands-Free (VOX): After pressing the TALK button, communication is typically hands-free, allowing you to speak and listen without holding the button.
• Push-to-Talk (Simplex): In some configurations or if VOX is not active, you may need to press and hold the TALK button to speak and release it to listen. Observe the system behavior to determine the active mode.

4.3 Døråbner

To release the entrance door for a visitor during a call:

1. Ensure communication is established with the visitor.
2. Tryk på Dørfrigivelse button (typically marked with a key icon). The door will unlock for a preset duration.

4.4 Calling Concierge/Security

To initiate a call to the concierge or security guard station:

1. Tryk på den udpegede Concierge/Security Call knap.
2. Wait for the station to answer and begin communication.

4.5 Lydstyrkekontrol

The GT-1A features controls for adjusting the call tone and communication volume. Refer to the specific markings on your unit for the location of these controls, typically small dials or buttons on the side or bottom of the unit.

5. Vedligeholdelse

The Aiphone GT-1A requires minimal maintenance to ensure optimal performance and longevity.

• Rensning: Gently wipe the exterior of the unit with a soft, dry cloth. For stubborn marks, a slightly damp en klud med mild sæbe kan bruges, efterfulgt af en tør aftørring.
• Undgå kemikalier: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic housing and electronic components.
• Inspektion: Kontrollér regelmæssigt for synlige skader eller løse forbindelser. Kontakt en kvalificeret tekniker, hvis der observeres problemer.

6. Fejlfinding

If you experience issues with your Aiphone GT-1A, consider the following common troubleshooting steps:

• No Audio During Call:
  • Check the volume control on the unit.
  • Ensure the TALK button is pressed correctly.
  • Verify that the system power is on.
• Døråbneren fungerer ikke:
  • Confirm that communication is active with the visitor.
  • Ensure the Door Release button is pressed firmly.
  • Check for any system error indicators on the entrance panel or master station.
• Unit Not Responding/No Power:
  • Verify that the building's power supply to the intercom system is active.
  • If multiple units are installed, check if other units are functioning.

For persistent issues or complex problems, it is recommended to contact a qualified Aiphone service technician or your system installer for professional diagnosis and repair.

7. Specifikationer

8. Support og garanti

For technical support, service, or warranty information regarding your Aiphone GT-1A Audio Tenant Station, please contact your authorized Aiphone dealer or the Aiphone Corporation directly. Contact details can typically be found on the official Aiphone website or in the documentation provided with your system.

It is recommended to have your product model number (GT-1A) and any relevant system details available when contacting support to facilitate efficient assistance.