OSD Audio LS3-PE 3-inch Landscape In-Ground Outdoor Speaker

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your OSD Audio LS3-PE 3-inch Landscape In-Ground Outdoor Speakers. These speakers are designed for outdoor use, offering weather resistance and reliable audio performance in various landscape settings.

Vigtige sikkerhedsoplysninger

• Læs alle instruktioner før installation og brug.
• Ensure all wiring connections are secure and properly insulated to prevent electrical hazards and ensure optimal performance.
• Do not attempt to service the speakers yourself. Refer all servicing to qualified personnel.
• Avoid placing speakers in areas where they may be submerged in water. While weather-resistant, prolonged submersion can cause damage.
• Use appropriate wire gauge for the length of your speaker cable runs to prevent signal loss and ensure adequate power delivery.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 2 x OSD Audio LS3-PE 3-inch Landscape Speakers
• 2 x Ground Stakes
• 2 x Surface Mount Brackets
• Brugervejledning (dette dokument)

Opsætning og installation

1. Højttalerplacering

Consider the listening area and desired sound coverage. For optimal stereo imaging, place speakers equidistant from the primary listening area. For broader, more ambient sound, distribute speakers evenly throughout the outdoor space. Avoid placing speakers directly against solid surfaces that might reflect sound excessively.

Image: A pair of OSD Audio LS3-PE speakers, shown with their ground stakes, ready for landscape installation.

2. Monteringsmuligheder

Your LS3-PE speakers offer versatile mounting options:

• Nedgravet installation: Attach the speaker to the provided ground stake. Push the stake firmly into the soil in your desired location. Ensure the speaker is stable and angled correctly for sound projection.
• Overflademontering: Use the included surface mount bracket to attach the speaker to a deck railing, wall, or other flat surface. Secure the bracket using appropriate screws (not included) for the mounting material. Adjust the speaker angle as needed.

Image: Two OSD Audio LS3-PE speakers demonstrating surface mount installation using the included brackets.

Image: Visual representation of flexible installation options for the LS3-PE speakers, including wall mounting and ground staking in a garden.

3. Ledningsforbindelser

The LS3-PE speakers are designed for wired connection to an amplifier or receiver. Each speaker has a positive (+) and negative (-) terminal. Ensure correct polarity when connecting to your amplivligere.

• Højttalerledning: Use high-quality, outdoor-rated speaker wire. For runs up to 50 feet, 16-gauge wire is typically sufficient. For longer runs, consider 14-gauge or 12-gauge wire to minimize signal loss.
• Tilslutning til højttalere: Strip approximately 1/2 inch of insulation from the ends of your speaker wire. Connect the positive (+) wire (often red or marked) to the positive terminal on the speaker, and the negative (-) wire (often black or unmarked) to the negative terminal. Ensure no stray wire strands are touching.
• Opretter forbindelse til Amplivligere: Connect the other end of the speaker wire to the corresponding positive (+) and negative (-) speaker output terminals on your amplifier eller modtager.
• Vejrbeskyttelse: For outdoor connections, use waterproof wire connectors or seal connections with silicone sealant or heat-shrink tubing to prevent moisture ingress.

Betjeningsvejledning

1. Ensure all speaker wires are securely connected to both the speakers and your amplifier/modtager.
2. Tænd din amplifier/modtager.
3. Vælg den ønskede lydkilde på din amplivligere.
4. Start playback at a low volume level and gradually increase to your preferred listening level.
5. Adjust the angle of the speakers as needed to optimize sound direction for your listening area.

While the product specifications mention "Wireless" connectivity, this refers to the potential for the amplifier connected to the speakers to have wireless input capabilities, not that the speakers themselves are wireless.

Opretholdelse

• Rensning: Tør højttalerkabinetterne af med jævne mellemrum med en blød kludamp klud til at fjerne snavs og snavs. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
• Sæsonbestemt inspektion: Before and after periods of extreme weather (e.g., heavy rain, snow, prolonged heat), inspect speaker wires and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
• Vejrbestandighed: The LS3-PE speakers are rated IP66 for weather resistance, meaning they are protected against dust ingress and powerful water jets. However, they are not designed for submersion. Ensure proper drainage around in-ground installations.

Image: The LS3-PE speakers are designed to withstand various outdoor weather conditions, including sun and rain.

Fejlfinding

Specifikationer

Image: Detailed dimensions of the LS3-PE speaker, highlighting its compact size and 3-inch woofer.

Garanti og support

For garantioplysninger, teknisk support eller til view other OSD Audio products, please visit the official OSD Audio webwebsted eller deres Amazon Brand Store:

OSD Audio Amazon Brand Store

Gem venligst din købsbevis i tilfælde af garantikrav.