Attop YD-719

Attop YD-719 Quad-Copter Brugermanual

Model: YD-719

1. Introduktion

The Attop YD-719 Quad-Copter is an 8-inch remote-controlled aerial vehicle designed for recreational flight. It features a 4-channel remote control system, 3-axis flight control for stable operation, and a built-in camera capable of recording video and capturing still images. The quad-copter utilizes 2.4 GHz wireless technology for reliable communication and is powered by a rechargeable battery.

Attop YD-719 Quad-Copter

Image 1.1: The Attop YD-719 Quad-Copter, showcasing its red and black design with four propellers.

2. Sikkerhedsforanstaltninger

  • Always operate the quad-copter in open areas, away from people, animals, buildings, and power lines.
  • Flyv ikke i stærk vind eller ugunstige vejrforhold.
  • Sørg for, at batteriet er fuldt opladet før hver flyvning.
  • Hold fingre og løstsiddende tøj væk fra roterende propeller.
  • Voksenopsyn anbefales til yngre brugere.
  • Do not attempt to modify the quad-copter or its components.
  • Undgå at flyve i nærheden af ​​lufthavne eller begrænset luftrum.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • Attop YD-719 Quad-Copter
  • Fjernbetjening
  • Rechargeable Battery (for quad-copter)
  • Four (4) Extra Rotor Blades
  • To (2) USB-opladerkabler
  • Brugervejledning (dette dokument)

4. Komponenter overview

4.1 Quad-Copter

The quad-copter features four rotors, a central body housing the electronics and camera, and landing gear. The built-in camera is located on the underside of the main body.

Attop YD-719 Quad-Copter Side View

Billede 4.1: Side view of the YD-719 Quad-Copter, showing the sleek body and propeller arms.

4.2 Fjernbetjening

The remote control is a 4-channel device operating on 2.4 GHz frequency, providing precise control over the quad-copter's movements. It typically includes two joysticks for flight control and various buttons for functions like trim adjustments, photo/video capture, and power.

Attop YD-719 Quad-Copter and Remote Control

Image 4.2: The Attop YD-719 Quad-Copter alongside its remote control, illustrating their relative sizes.

5. Opsætning

5.1 Quad-Copter Battery Charging

  1. Locate the rechargeable battery within the quad-copter's compartment.
  2. Connect one end of the provided USB charging cable to the battery and the other end to a USB power source (e.g., computer USB port, USB wall adapter).
  3. The charging indicator light will illuminate during charging and typically turn off or change color when fully charged. Refer to the specific indicator behavior in the product documentation if available.
  4. Opladningstiden er cirka 60-90 minutter. Overoplades ikke.
Attop YD-719 Quad-Copter Battery Compartment

Billede 5.1: Underside view of the YD-719 Quad-Copter, showing the battery compartment and wiring.

5.2 Installation af batteri i fjernbetjening

  1. Åbn batterirummet på bagsiden af ​​fjernbetjeningen.
  2. Isæt tre (3) AAA-batterier, og sørg for at polerne vender korrekt (+/-).
  3. Luk batterirummet forsvarligt.

5.3 Montering/udskiftning af propel

The quad-copter comes with four extra rotor blades. If replacement is necessary:

  1. Carefully remove the damaged propeller by gently pulling it upwards from the motor shaft.
  2. Note the direction of rotation for each propeller. Propellers are typically marked (e.g., A or B) and must be installed on the correct motor.
  3. Press the new propeller firmly onto the motor shaft until it is seated securely.
Attop YD-719 Quad-Copter Propeller Close-up

Image 5.2: Close-up of a propeller and motor assembly on the YD-719 Quad-Copter.

6. Betjeningsvejledning

6.1 Parring af fjernbetjeningen

  1. Place the quad-copter on a flat, level surface.
  2. Turn on the quad-copter's power switch. The LED lights will flash.
  3. Tænd for fjernbetjeningen.
  4. Push the left joystick (throttle) all the way up, then all the way down. The quad-copter's LED lights will stop flashing and remain solid, indicating successful pairing.

6.2 Start og landing

  • Start: After pairing, slowly push the left joystick (throttle) upwards to increase motor speed and lift the quad-copter off the ground.
  • Landing: Slowly pull the left joystick (throttle) downwards to decrease motor speed and gently land the quad-copter. Once landed, pull the throttle all the way down to stop the motors.

6.3 Grundlæggende flyvekontrol

  • Stig op/ned: Left joystick (throttle) up/down.
  • Frem/tilbage: Højre joystick op/ned.
  • Drej til venstre/højre (drej): Venstre joystick venstre/højre.
  • Flyv til venstre/højre (rul): Højre joystick venstre/højre.

6.4 Optagelse af video og fotos

The YD-719 is equipped with a built-in camera. Refer to the remote control diagram (if provided in a physical manual) for specific buttons to activate video recording or still photo capture. Typically, a short press activates photo mode, and a long press activates video recording.

7. Vedligeholdelse

7.1 Rengøring

Use a soft, dry cloth to wipe down the quad-copter after use. Avoid using water or cleaning solvents, as they may damage electronic components.

7.2 Propelpleje

Regularly inspect propellers for damage (bends, cracks, chips). Replace any damaged propellers immediately to ensure stable flight and prevent further damage to the quad-copter.

7.3 Batteriopbevaring

When not in use for extended periods, store the quad-copter battery at approximately 50% charge in a cool, dry place. Remove batteries from the remote control if it will not be used for a long time.

8. Fejlfinding

  • Quad-Copter not responding: Ensure both quad-copter and remote control are powered on and successfully paired. Check remote control batteries.
  • Ustabil flyvning: Check for damaged propellers and replace if necessary. Ensure the quad-copter is placed on a level surface before pairing. Perform trim adjustments on the remote control if the quad-copter drifts.
  • Kort flyvetid: Ensure the quad-copter battery is fully charged. Battery performance may degrade over time.
  • Kameraet optager ikke: Ensure the quad-copter is powered on and the camera function is correctly activated via the remote control. Check if the memory card (if applicable) is inserted and has sufficient space.

9. Specifikationer

FeatureSpecifikation
ModelnummerYD-719
Fabrikantovenpå
Dimensioner (ca.)36.83 x 34.93 x 11.43 cm (14.5 x 13.75 x 4.5 tommer)
Vægt (ca.)680.39 g (1.5 lbs)
Kontrolkanaler4-kanal
Flyvekontrol3-akse
Trådløs teknologi2.4 GHz
Quadcopter batteri600 mAh genopladelig
Fjernbetjenings batteri3 x AAA (medfølger ikke)
Speciel funktionBuilt-in Camera (Video/Photo)

10. Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the manufacturer's official webwebsted. Gem din købsbevis til garantikrav.

Relaterede dokumenter - YD-719

Preview ATTOP F16 Drone Brugermanual: Funktioner, betjening og fejlfinding
Omfattende brugermanual til ATTOP F16-dronen. Lær om specifikationer, fjernbetjeningsfunktioner, installation, flyvetilstande som GPS og indendørs, kalibrering, sikkerhedsfunktioner, fejlfinding og Wi-Fi-app-forbindelse for en optimal flyveoplevelse.
Preview ATTOP W10 Drone: Lynstartguide og betjeningsmanual
Omfattende guide til opsætning, betjening og vedligeholdelse af ATTOP W10-dronen. Lær om pakkens indhold, opladning, flystyring, sikkerhedsforanstaltninger og appfunktioner til denne 1080P FPV-drone.
Preview Attop F16 Drone Quick Guide
Denne hurtigstartguide indeholder vigtige oplysninger om Attop F16 GPS-dronen. Lær, hvordan du downloader G07 Drone-appen, parrer din enhed, kalibrerer gyroskopet og kompasset, letter, lander og udfører et nødstop. Indeholder oplysninger om Wi-Fi-forbindelse, GPS og indendørstilstande samt garantioplysninger.
Preview Attop A8 Drone Brugermanual - Opsætnings-, Flyve- og Sikkerhedsvejledning
Officiel betjeningsmanual til Attop A8-dronen. Lær, hvordan du opsætter, oplader, flyver og vedligeholder din Attop A8 dron med detaljerede instruktioner, sikkerhedstips og råd om fejlfinding.
Preview Attop RC Helikopter Instruktionsmanual - Model 0754927
Brugervejledning til Attop RC-helikopteren (model 0754927), der dækker opsætning, flyveoperationer, opladning, fejlfinding og sikkerhedsforanstaltninger for optimal brug.
Preview ATTOP X-PACK 18 Drone Brugermanual: Opsætnings-, flyvnings- og sikkerhedsvejledning
Omfattende betjeningsmanual til ATTOP X-PACK 18-dronen, der dækker pakkens indhold, opladning, installation, fjernbetjeningens funktioner, flyveoperationer, sikkerhedsforanstaltninger og fejlfinding. Lær, hvordan du flyver din drone sikkert og effektivt.