Sugatsune Lamp HH-KL160 Håndtag Brugsanvisning

1. Introduktion

This manual provides instructions for the proper installation, operation, and maintenance of the Sugatsune Lamp HH-KL160 Pulls. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for use as a recessed pull handle for doors or drawers.

Image 1: The Sugatsune Lamp HH-KL160 Pull, a rectangular recessed handle made of satin-finished 304 stainless steel. The brand "LAMP" and material "SUS304" are subtly engraved on the surface.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

• Sørg for, at alle komponenter er til stede og ubeskadigede før installation.
• Brug passende værktøjer til installation.
• Do not apply excessive force during installation or operation.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Kontroller, at alle varer er inkluderet i pakken:

• 1x Sugatsune Lamp HH-KL160 Pull
• Mounting Screws (quantity as required for installation)

4. Specifikationer

5. Opsætning og installation

This section outlines the general steps for installing the HH-KL160 Pull. Specific installation requirements may vary based on the application (e.g., door, drawer, cabinet).

5.1 Nødvendigt værktøj

• Målebånd eller lineal
• Blyant eller tusch
• Bore
• Appropriate Drill Bits (for pilot holes and recess)
• Screwdriver (compatible with mounting screws)
• Chisel or Router (for recess, if applicable)

5.2 Installationstrin

1. Bestem placering: Carefully select the desired location for the pull handle on your door or drawer. Mark the center points for the mounting screws and the outline for the recessed area.
2. Prepare Recess (if required): If the pull is to be flush-mounted, create a recess in the material according to the dimensions of the pull's body. Ensure the depth is sufficient for the pull to sit flush or slightly proud as desired.
3. Bor pilothuller: Drill pilot holes for the mounting screws at the marked locations. Ensure the drill bit size is appropriate for the screws to prevent splitting the material.
4. Position the Pull: Place the HH-KL160 Pull into the prepared recess (if applicable) and align the screw holes with the pilot holes.
5. Secure the Pull: Insert the mounting screws and tighten them securely. Do not overtighten, as this can damage the pull or the mounting surface.
6. Test drift: Gently pull the handle to ensure it is firmly attached and operates smoothly.

6. Betjeningsvejledning

The Sugatsune Lamp HH-KL160 Pull is a static handle designed for manual operation. To use, simply grasp the recessed area and apply gentle force to open or close the door or drawer it is attached to.

• Avoid using excessive force, which could damage the handle or the mounting surface.
• Do not use the handle for purposes other than its intended function (e.g., as a climbing aid).

7. Pleje og vedligeholdelse

To ensure the longevity and appearance of your HH-KL160 Pull, follow these maintenance guidelines:

• Rensning: Tør overfladen regelmæssigt af med en blød,amp cloth. For stubborn marks, use a mild soap solution and then dry thoroughly. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the satin finish.
• Inspektion: Periodically check the mounting screws for tightness. If they become loose, gently retighten them.
• Korrosionsforebyggelse: While 304 stainless steel is highly resistant to corrosion, prolonged exposure to harsh environments (e.g., saltwater, strong acids) should be avoided.

8. Fejlfinding

9. Garanti og support

For information regarding warranty coverage or technical support for your Sugatsune Lamp HH-KL160 Pull, please refer to the official Sugatsune America webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.

Fabrikant: Sugatsune Amerika

Webwebsted: www.sugatsune.com