Brady 57974 Ammoniakrørmarkør Brugermanual

1. Produktet er slutview

The Brady 57974 Ammonia Pipe Marker is designed for clear and effective labeling of ammonia piping systems. This product ensures compliance with safety standards by providing highly visible identification of pipe contents. Each pack contains 12 individual markers, suitable for industrial and commercial applications where precise pipe content identification is critical for safety and operational efficiency.

This pipe marker is specifically engineered to meet the IIAR (International Institute of Ammonia Refrigeration) Standard, ensuring its suitability for ammonia refrigeration systems and other ammonia-carrying pipelines. The design includes clear text and directional arrows to indicate flow, enhancing safety protocols and facilitating quick identification in emergency situations or during routine maintenance.

Brady 57974 Ammonia Pipe Marker, yellow with black text 'AMMONIA' and directional arrow

Figure 1: Brady 57974 Ammonia Pipe Marker. This image displays a rolled-up yellow pipe marker with black text "LTRL LIQ AMMONIA LOW" and a black arrow indicating flow direction. The marker features orange and green bands for additional identification.

2. Opsætning og installation

Proper installation of the Brady 57974 pipe marker is crucial for its effectiveness and longevity. Follow these steps for optimal application:

Forberedelse af overfladen: Ensure the pipe surface where the marker will be applied is clean, dry, and free from grease, oil, dust, or any other contaminants. Use a suitable cleaning agent if necessary, and allow the surface to dry completely.
Placering: Position the pipe marker in a highly visible location on the pipe, ideally near valves, fittings, changes in direction, or at regular intervals along long pipe runs. Ensure the text and directional arrow are oriented correctly for easy reading.
Anvendelse: Peel off the backing from the adhesive side of the marker. Carefully wrap the marker around the pipe, ensuring it adheres smoothly without wrinkles or air bubbles. Press firmly along the entire length of the marker to ensure full contact with the pipe surface.
Retningspil: Confirm that the directional arrow on the marker accurately indicates the flow direction of the ammonia within the pipe.

For best results, apply the markers in an environment with moderate temperature and humidity. Avoid applying in extremely cold or hot conditions, as this may affect adhesive performance.

3. Operating Instructions (Purpose and Function)

The Brady 57974 Ammonia Pipe Marker serves as a critical visual communication tool. Its primary function is to clearly identify pipes carrying ammonia, enhancing safety and operational efficiency within industrial environments.

Content Identification: The prominent "AMMONIA" text immediately informs personnel about the pipe's contents, preventing accidental exposure or mishandling.
Strømningsretning: The integrated directional arrow indicates the flow of the substance, which is vital for maintenance, troubleshooting, and emergency response.
Standard overholdelse: Designed to meet IIAR standards, these markers help facilities comply with industry regulations and best practices for ammonia refrigeration systems.
Forbedret sikkerhed: By providing clear and consistent labeling, the markers reduce the risk of errors during maintenance, repairs, or system modifications, contributing to a safer working environment.

No active "operation" is required for the marker itself; its function is passive, providing continuous visual information once installed.

4. Vedligeholdelse

To ensure the continued effectiveness and readability of your Brady 57974 Ammonia Pipe Markers, periodic maintenance is recommended:

Regelmæssig inspektion: Periodically inspect all installed pipe markers for signs of wear, fading, peeling, or damage. The frequency of inspection should be determined by the environmental conditions and operational demands of your facility.
Rensning: If markers become dirty, gently clean them with a mild soap solution and a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the marker's surface or fade the print. Rinse with clean water and allow to air dry.
Udskiftning: Replace any markers that are no longer clearly legible, have lost their adhesive properties, or are physically damaged. Maintaining clear and intact labeling is essential for safety compliance.
Miljøhensyn: While designed for durability, extreme temperatures, prolonged exposure to direct sunlight, or harsh chemical environments may accelerate wear. Consider these factors during inspection and replacement planning.

5. Fejlfinding

While the Brady 57974 pipe markers are designed for reliability, certain issues may arise. Here are common concerns and their solutions:

Problem	Mulig årsag	Løsning
Marker is peeling or not adhering properly.	Improper surface preparation (dirty, oily, wet). Application in extreme temperatures. Insufficient pressure during application. Pipe surface material incompatibility.	Ensure pipe surface is thoroughly cleaned and dry before application. Apply in recommended temperature ranges (typically room temperature). Apply firm, even pressure across the entire marker during installation. Consult Brady technical support if issues persist on specific pipe materials. Replace the marker if adhesion is compromised.
Text or graphics are fading.	Prolonged exposure to harsh UV light. Exposure to aggressive chemicals or solvents. Abrasion from physical contact.	Regularly inspect and replace faded markers. Consider protective overlays if markers are exposed to harsh conditions. Ensure markers are not in areas of high physical contact.
Marker is damaged (torn, ripped).	Physical impact or abrasion. Forkert håndtering under installationen.	Replace damaged markers immediately to maintain safety compliance. Handle markers carefully during application.

6. Specifikationer

Modelnummer: 57974
Produkttype: Pipe Marker
Substance Identified: Ammonia (IIAr)
Mængde: Pakke med 12 stk
Fabrikant: Brady
ASIN: B00ID7YL02
Første tilgængelige dato: 11. februar 2014
Overholdelse: Meets IIAR Standard

7. Garanti og support

For information regarding product warranty, returns, or technical support for the Brady 57974 Ammonia Pipe Marker, please refer to the official Brady website or contact Brady customer service directly. Specific warranty terms may vary based on region and purchase agreement.

You can visit the official Brady store for more information: Brady Official Store

	Brady M611 etiketprinter brugermanual - funktioner, opsætning og support Udforsk Brady M611-etiketprinteren med denne omfattende brugermanual. Lær om dens robuste design, trådløse forbindelse (Bluetooth, Wi-Fi), berøringsskærmsgrænseflade og softwareintegration til at skabe professionelle etiketter. Find opsætningsvejledninger, vedligeholdelsestips og tekniske supportressourcer.
	Brady bærbare etiketprintere: Modelsammenligning, specifikationer og udvælgelsesguide Dette dokument giver en omfattende sammenligning af Bradys bærbare etiketprintermodeller, herunder BMP21-LAB, BMP21-PLUS, BMP41, BMP51, BradyPrinter M611, BMP61 og BMP71. Det beskriver tekniske specifikationer, funktioner, applikationer og indbyggede guider, der hjælper brugerne med at vælge den optimale etiketprinter til industrielle, elektriske, datakommunikations-, laboratorie- og sikkerhedsidentifikationsbehov. Kompatibilitet med Brady Workstation-software er også nævnt.
	Brady M710 bærbar etiketprinter: Hastighed, holdbarhed og alsidighed Oplev Brady M710, den hurtigste og mest avancerede bærbare etiketprinter. Den er ideel til industrielle og feltmæssige applikationer og tilbyder højhastighedsudskrivning, omfattende materialekompatibilitet, robust holdbarhed og problemfri tilslutning til mobilapps og software.
	Brady BMP®21-PLUS etiketprinter hurtigstartguide Denne vejledning indeholder vigtige oplysninger om opsætning og betjening af den håndholdte Brady BMP®21-PLUS etiketprinter. Lær, hvordan du installerer batterier, tilslutter strøm, skifter etiketpatroner, bruger tastaturet, opretter, gemmer, åbner og udskriver etiketter.
	Brady M210/M210-LAB bærbar etiketprinter brugermanual Denne brugermanual indeholder omfattende instruktioner til betjening og vedligeholdelse af de bærbare Brady M210 og M210-LAB etiketprintere, herunder opsætning, betjening, formatering, fejlfinding og specifikationer for fremstilling af holdbare etiketter i forskellige miljøer.
	Brady M211 etiketprinter hurtigstartguide Kom hurtigt i gang med Brady M211-labelprinteren. Denne vejledning dækker opladning, indsættelse af etiketter, download af app, tænding og Bluetooth-forbindelse.

Brady 57974