CAD Audio CADLive D80 Microphone User Manual

Indledning

The CADLive D80 is a large diaphragm moving coil dynamic microphone designed for versatile audio capture. It offers a unique sound profile suitable for various applications, including guitar cabinets, percussion, and live stage performances. Its robust design and supercardioid polar pattern ensure clear, focused sound even in demanding environments.

Image: The CAD Audio CADLive D80 Large Diaphragm Supercardioid Dynamic Side Address Microphone.

Pakkens indhold

• CADLive D80 Microphone
• Mikrofon klip
• Beskyttende pose

Please ensure all items are present upon unboxing. If any components are missing or damaged, contact CAD Audio customer support.

Funktioner

• Large Diaphragm Moving Coil Dynamic: Delivers a full, rich sound.
• Supercardioid polært mønster: Provides excellent off-axis rejection, minimizing feedback and isolating the sound source.
• Høj output: Ensures strong signal levels, suitable for loud stages and demanding applications.
• Holdbar konstruktion: Built to withstand the rigors of live performance and studio use.
• Side Address Design: Optimized for close-miking instruments and amplivførere.

Opsætning

1. Montering: Attach the D80 microphone to a standard microphone stand using the provided microphone clip. Ensure the microphone is securely fastened.
2. Forbindelse: Connect the microphone to your audio interface, mixer, or preamplifier using a balanced XLR cable. The D80 features an XLR connector for reliable signal transmission.
3. Placering:
   • For guitar cabinets, position the front of the microphone (indicated by "Front" on the casing) towards the speaker cone. Experiment with placement (center vs. edge) and distance for desired tonal characteristics.
   • For percussion, place the microphone to capture the primary sound source while minimizing bleed from other instruments. The supercardioid pattern helps in isolating the sound.
4. Få Staging: Before use, set the gain on your audio interface or mixer to an appropriate level. Start with the gain low and gradually increase it until a strong, clear signal is achieved without clipping or distortion.

Betjeningsvejledning

The CADLive D80 is a dynamic microphone and does not require phantom power. Its supercardioid polar pattern is highly effective at rejecting sounds from the sides and rear, making it ideal for live sound reinforcement and studio recording where sound isolation is crucial.

• Optimal brug: This microphone excels at capturing the rich, full sound of guitar amplifiers and the punch of percussion instruments. Its large diaphragm design contributes to a robust low-end response.
• Nærhedseffekt: Like most directional microphones, the D80 exhibits a proximity effect, meaning bass response increases as the microphone is moved closer to the sound source. Utilize this effect to tailor the sound to your preference.
• Feedback kontrol: Due to its supercardioid pattern, the D80 is less prone to feedback in live settings. Position stage monitors strategically to avoid pointing directly into the front of the microphone.

Opretholdelse

• Rensning: Use a soft, dry cloth to wipe down the microphone body. For the grille, a soft brush can be used to gently remove dust or debris. Do not use liquid cleaners or solvents, as they may damage the microphone.
• Opbevaring: When not in use, store the D80 in its protective pouch to shield it from dust, moisture, and physical damage. Keep it in a cool, dry place.
• Håndtering: Avoid dropping the microphone or subjecting it to harsh impacts, as this can damage the internal components and affect performance.

Fejlfinding

Specifikationer

Garanti og support

For detailed warranty information and customer support, please refer to the documentation included with your purchase or visit the official CAD Audio webwebsted. Beskyttelsesplaner kan også være tilgængelige for udvidet dækning.

Fabrikant: CAD-lyd