QualGear QG-TM-001 Ultra Low Profile Betjeningsvejledning til TV -vægmontering

Indledning

The QualGear QG-TM-001 is an ultra-low profile, picture-hanging style TV wall mount designed for most 37 to 70-inch TVs and monitors, supporting up to 110 lbs. This mount allows your TV to sit less than 0.6 inches from the wall, providing a sleek and minimalist appearance. Constructed with durable stainless steel, it offers a secure and stable mounting solution. Please note: This mount is not compatible for wood stud installations for TVs with VESA (mounting hole patterns) less than 400x400mm.

Image: A television mounted on the QualGear QG-TM-001 wall mount, appearing flush with the wall.

Hvad er der i æsken

• Vægmonteringskomponenter
• Monteringshardwaresæt

Image: Various screws, washers, spacers, and wall mount components from the QualGear QG-TM-001 hardware kit.

Værktøj påkrævet

Følgende værktøjer anbefales til installation:

• Elektrisk boremaskine
• Stiknøgle
• Mærkepen
• Hammer

Installationsvejledning

Follow these steps to properly install your QualGear QG-TM-001 TV wall mount:

1. Trin 1: Forbered væggen
   For most installations, locate the wall studs and mark the pilot holes centered on the stud. If not installing on a wood panel, ensure proper stud location. Drill the pilot holes and then screw the wall mount plates onto the wall securely.
2. Step 2: Install Adapter Brackets on TV
   Attach the adapter brackets to the back of your TV. This mount supports a wide range of VESA mounting hole patterns. Select the appropriate screws, washers, and spacers from the provided hardware kit that match your TV's specifications. Securely fasten the brackets.
3. Step 3: Hang the TV on the Wall Plate(s)
   Carefully lift the TV and hook the wire rope from the TV-mounted brackets over the wall plate rail. Ensure the TV is securely seated and correctly attached to the wall mount. This step may require assistance.
4. Step 4: Manage Cables
   To manage cables, gently fold out the tilt support mechanism on the mount. Connect all necessary cables to your TV. Once cables are connected and organized, fold the tilt support back into its original position.

Drift

The QualGear QG-TM-001 is a fixed wall mount, meaning it does not offer tilt, swivel, or rotation adjustments once installed. Its primary function is to hold the TV securely and flush against the wall. The tilt support feature can be temporarily engaged to provide space for cable access and management behind the TV.

Opretholdelse

To ensure the longevity and safety of your TV mount:

• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre.
• Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Overskrid ikke den maksimale vægtkapacitet på 110 lbs.

Fejlfinding

If you encounter any issues during or after installation:

• TV'et er ikke i vater: Recheck the wall mount installation to ensure the wall plates are perfectly level before hanging the TV.
• TV Feels Unstable: Verify that all screws are tightened correctly and that the wall studs were properly located and utilized for mounting. Ensure the wire rope is securely hooked over the wall plate rail.
• Difficulty with Cable Access: Utilize the tilt support feature by folding it out to create temporary space for easier cable connection and management.

Specifikationer

• Modelnummer: QG-TM-001
• Kompatible tv-størrelser: Most 37 to 70-inch TVs
• Vægt kapacitet: Op til 110 lbs
• Montering Profile: Less than 0.6 inches from the wall
• Materiale: Rustfrit stål
• Monteringstype: Fast vægbeslag
• Produktdimensioner: 9.5 x 6.5 x 2 tommer
• Varens vægt: 1.32 pund
• VESA-kompatibilitet: 100x100mm til 800x800mm

Garanti og support

For warranty information or technical support, please refer to the official QualGear webwebstedet eller kontakt deres kundeservice. Gem din købskvittering til eventuelle garantikrav.