1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PHILIPS Advance Centium ICN-2S54T35I Fluorescent Ballast. Please read this manual thoroughly before installation and retain it for future reference.
The Centium T5 electronic ballast is designed to operate either 2 or 4 F54T5 or F54T5HP/ES lamps. It delivers optimum performance across a voltage range of 120-277V. This ballast is engineered for use in environments with temperatures up to 90-degrees Celsius (194-degrees Fahrenheit).
2. Sikkerhedsoplysninger
ADVARSEL: Risk of electric shock. Installation and servicing should be performed by qualified personnel only. Disconnect power before installing or servicing.
- Ensure the main power supply is disconnected before any installation, wiring, or maintenance procedures.
- Kontroller, at input voltage matcher ballastens specificerede volumentage rækkevidde (120-277V).
- Brug ikke ballasten med beskadigede ledninger eller hvis casing er kompromitteret.
- Sørg for korrekt jordforbindelse i henhold til lokale el-forskrifter.
- Do not expose the ballast to moisture or extreme humidity.
- Maintain adequate ventilation around the ballast to prevent overheating.
3. Produktet er slutview
The PHILIPS Advance Centium ICN-2S54T35I is a high-performance electronic ballast featuring a programmed start for extended lamp life. It is suitable for a variety of commercial and industrial lighting applications.
Billede 1: Forside view of the PHILIPS Advance Centium ICN-2S54T35I Fluorescent Ballast. This image shows the compact design and wire leads of the ballast, which is essential for connecting to the power supply and fluorescent lamps.
Nøglefunktioner:
- Lamp Kompatibilitet: Operates 2 or 4 F54T5/HO or F54T5HP/ES lamps.
- Voltage: 120-277V AC, 50/60 Hz.
- Starttype: Programmed Start for optimal lamp liv.
- Ballastfaktor: 1.02.
- Driftstemperatur: Designed for environments up to 90°C (194°F).
- Minimum starttemperatur: -20°F.
- Total harmonisk forvrængning (THD): Maximum 10%.
- Effektfaktor: 0.98.
- Lydvurdering: Klasse A.
- Lamp Operation: Semi-independent or independent.
4. Opsætning og installation
Installation of this fluorescent ballast requires knowledge of electrical systems. It is strongly recommended that installation be performed by a licensed electrician or qualified personnel.
Installationstrin:
- Afbryd strømmen: Ensure all power to the fixture is turned off at the circuit breaker before beginning installation.
- Remove Old Ballast: Carefully remove the existing ballast, noting the wiring connections.
- Monter ny ballast: Securely mount the PHILIPS Advance Centium ICN-2S54T35I ballast within the fixture. The ballast dimensions are approximately 1.5 x 1.5 x 15 inches.
- Ledningsforbindelser: Connect the ballast's wire leads to the fixture's power supply and lamp holders according to the wiring diagram provided with the ballast (not included in this manual, refer to product packaging or manufacturer's website). Ensure all connections are secure and insulated.
- Installer Lamps: Insert the compatible F54T5/HO or F54T5HP/ES lamps ind i lamp indehavere.
- Gendan strøm: Once all connections are verified and lamps are installed, restore power to the fixture.
The ballast weighs approximately 0.01 ounces and is constructed primarily from copper components, ensuring durability and efficient operation.
5. Betjeningsvejledning
The PHILIPS Advance Centium ICN-2S54T35I ballast operates automatically once properly installed and powered. It utilizes a programmed start method, which preheats the lamp cathodes before ignition. This gentle starting process minimizes stress on the lamp electrodes, significantly extending lamp life compared to instant start ballasts.
- Upon applying power, the ballast will initiate the programmed start sequence.
- Lamps will typically ignite within 1-2 seconds after power is supplied.
- The ballast maintains stable lamp drift, hvilket giver ensartet lysudbytte.
6. Vedligeholdelse
The PHILIPS Advance Centium ICN-2S54T35I ballast is designed for long-term, maintenance-free operation. However, periodic checks of the lighting fixture are recommended.
- Strømafbrydelse: Afbryd altid strømmen, før du udfører vedligeholdelse.
- Rensning: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, lint-free cloth for cleaning.
- Ledningsinspektion: Periodically inspect wiring for any signs of wear, fraying, or loose connections.
- Lamp Udskiftning: Udskift lysstofrøramps with compatible F54T5/HO or F54T5HP/ES types when they reach their end of life or show signs of flickering.
7. Fejlfinding
If your lighting fixture is not operating correctly, refer to the following troubleshooting guide:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamps lyser ikke | Ingen strøm til armaturet Forkert ledningsføring Defekt lamps Defekt ballast | Kontroller afbryderen og vægafbryderen Verify wiring connections (refer to diagram) Udskift lamps with known good ones Replace ballast if other solutions fail |
| Lamps flicker or dim | Løs lamp forbindelser Lamps nearing end of life Forkert lamp type Ballast overheating | Reseat lamps firmly Udskift lamps Ensure F54T5/HO or F54T5HP/ES lamps bruges Ensure adequate ventilation around ballast |
| Ballast hums loudly | Løs montering Normal operation (slight hum is common) | Spænd monteringsskruerne If hum is excessive, consult a qualified electrician |
If problems persist after attempting these solutions, contact a qualified electrician or PHILIPS customer support.
8. Specifikationer
| Specifikation | Værdi |
|---|---|
| Varenummer | ICN2S54T35I |
| Varens vægt | 0.01 ounce |
| Produktdimensioner | 1.5 x 1.5 x 15 tommer |
| Materiale | Kobber |
| Wattage | 2000 watts (Max fixture wattage) |
| Vare Pakke Antal | 1 |
| Type pære | Fluorescent (F54T5/HO, F54T5HP/ES) |
| Input bindtage | 120-277V |
| Frekvens | 50/60 Hz |
| Ballastfaktor | 1.02 |
| Starttype | Programmeret start |
| Max driftstemp | 90°C (194°F) |
| Min. starttemperatur | -20 ° F |
| THD | Mindre end 10 % |
| Effektfaktor | 0.98 |
| Lydvurdering | Klasse A |
9. Garantioplysninger
This PHILIPS Advance Centium ballast is covered by a manufacturer's limited warranty. For specific warranty terms, conditions, and duration, please refer to the documentation included with your product or visit the official PHILIPS lighting webwebsted. Gem din købsbevis til garantikrav.
10. Kundesupport
For technical assistance, product inquiries, or support, please contact PHILIPS customer service. Refer to the official PHILIPS webwebstedet eller produktemballagen for de mest aktuelle kontaktoplysninger.
Online ressourcer: www.lighting.philips.com
