1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of the BANNER ENGINEERING R58ECRGB1Q Photoelectric Sensor. This sensor is designed for industrial applications requiring precise object detection using a parallel sensing beam.
The R58ECRGB1Q features 1 NPN and 1 PNP output, bipolar operation, and a Euro 5-PIN Pigtail connector, accepting an input voltage på 10-30 VDC.
Figure 1: BANNER ENGINEERING R58ECRGB1Q Photoelectric Sensor. This image displays the sensor's black housing with a prominent yellow label. Visible features include control indicators such as "DO", "LO", "OFF", "ON", and "DYNAMIC", along with a "SWITCH POINT" scale from 1 to 8. A bright red sensing beam is emitted from the sensor's lens, indicating its active state. The sensor is shown in an operational context, positioned above a moving material, typical of an industrial automation setup.
2. Sikkerhedsoplysninger
Read all instructions carefully before installing or operating the sensor. Failure to follow these instructions may result in product damage, property damage, or serious injury.
- Sørg for, at strømmen er afbrudt, før du udfører nogen form for installation eller vedligeholdelse.
- Kun kvalificeret personale bør installere og servicere denne enhed.
- Overskrid ikke den specificerede indgangsvolumentage rækkevidde (10-30 VDC).
- Protect the sensor from excessive vibration, shock, and extreme temperatures.
- Avoid direct exposure of the eyes to the emitted light beam.
3. Opsætning og installation
3.1 Montering
Mount the R58ECRGB1Q sensor securely using appropriate hardware. Ensure the sensing beam path is clear and unobstructed for optimal performance. The sensor should be positioned to allow for proper alignment with the target object.
3.2 Ledningsføring
The sensor features a Euro 5-PIN Pigtail connector. Refer to the following general wiring guide. Consult specific product documentation or wiring diagrams provided with your sensor for exact pin assignments, as configurations may vary.
- Pin 1: +VDC (10-30 VDC)
- Pin 2: NPN udgang
- Pin 3: 0 VDC (Ground)
- Pin 4: PNP output
- Pin 5: Not Used / Function Input (Refer to specific model documentation)
Sørg for, at alle forbindelser er sikre og isolerede for at forhindre kortslutninger.
4. Betjening og konfiguration
The R58ECRGB1Q sensor includes "Dynamic Teach" and "Static Teach" functions for precise configuration of sensing thresholds.
4.1 Dynamic Teach
Dynamic Teach is used for teaching the sensor to detect variations in a moving target or background. This method is ideal for applications where the target and background are similar or where the target is moving.
- Hold DYNAMIC: Press and hold the "DYNAMIC" button on the sensor.
- Present Conditions: While holding the button, pass the target object(s) through the sensing beam, or present the range of conditions you wish the sensor to learn.
- LEDs Flash: Observe the indicator LEDs; they will flash during the teaching process.
- Release DYNAMIC: Release the "DYNAMIC" button once the desired conditions have been presented. The sensor will store the learned parameters.
4.2 Static Teach
Static Teach is used for teaching the sensor distinct ON and OFF conditions, typically for stationary targets or clear differentiation between target and background.
- Hold STATIC: Press and hold the "STATIC" button (or equivalent teach button, if "STATIC" is not explicitly labeled, refer to the "SWITCH POINT" area for teach button). Hold until the LEDs begin to flash.
- Present ON Condition: Present the object or condition that should trigger an "ON" state. Click the "STATIC" button once to register this condition.
- Present OFF Condition: Present the object or condition that should trigger an "OFF" state (e.g., no object, background). Click the "STATIC" button once to register this condition.
- The sensor will then be configured based on these two distinct states.
4.3 Indikatorer og kontroller
The sensor features several indicators and controls for status monitoring and adjustment:
- DO (Dark Operate) / LO (Light Operate): Indicates the output state based on light or dark conditions.
- FRA / TIL: General status indicators for the sensor's output.
- DYNAMISK: Button/indicator for Dynamic Teach mode.
- SWITCH POINT (1-8): A multi-position switch or indicator for setting sensitivity or teach points. Refer to specific product diagrams for exact functionality.
5. Vedligeholdelse
The R58ECRGB1Q sensor is designed for minimal maintenance. Regular inspection and cleaning are recommended to ensure optimal performance.
- Rensning: Periodically clean the sensor lens and housing with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige materialet.
- Inspektion: Check wiring and connections for any signs of wear, damage, or corrosion. Ensure mounting hardware remains secure.
- Miljø: Sørg for, at driftsmiljøet forbliver inden for de angivne temperatur- og luftfugtighedsområder.
6. Fejlfinding
Hvis sensoren ikke fungerer som forventet, skal du overveje følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Sensoren tændes ikke. | Ingen strømforsyning; forkert ledningsføring; defekt strømforsyning. | Verify power connections (10-30 VDC); check wiring for shorts or breaks; test power supply. |
| Sensor not detecting objects. | Misalignment; dirty lens; incorrect teach setting; object too small/far. | Re-align sensor and target; clean lens; re-perform Dynamic or Static Teach; ensure object is within sensing range. |
| Erratic or inconsistent detection. | Environmental interference (dust, steam); unstable mounting; reflective surfaces. | Clean environment; secure mounting; adjust sensor angle or use retroreflective tape if applicable. |
| Output always ON or OFF. | Incorrect teach setting; sensor damaged. | Re-perform teach procedure; if problem persists, sensor may require replacement. |
If troubleshooting steps do not resolve the issue, contact BANNER ENGINEERING technical support.
7. Tekniske specifikationer
| Parameter | Værdi |
|---|---|
| Modelnummer | R58ECRGB1Q |
| Varenummer | R58ECRGB1Q |
| Mærke | BANNERTEKNIK |
| Fabrikant | BANNERTEKNIK |
| Input bindtage | 10-30 VDC |
| Udgange | 1 NPN, 1 PNP, Bipolar |
| Connector Type | Euro 5-PIN Pigtail |
| Sensortype | Parallel Sensing Beam, Photoelectric |
| Materiale | Kobber |
| Emnepakkemål (L x B x H) | 3.96 x 2.04 x 2.04 tommer |
| Pakkevægt | 2.2 pund |
| Dato først tilgængelig | 23. juni 2013 |
8. Garantioplysninger
BANNER ENGINEERING warrants its products against defects in materials and workmanship for a period specified in their standard warranty terms. This warranty typically covers repair or replacement of defective products. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications.
For detailed warranty terms and conditions, please refer to the official BANNER ENGINEERING webwebsted eller kontakt deres kundeservice.
9. Kundesupport
For technical assistance, product inquiries, or service requests, please contact BANNER ENGINEERING customer support:
- Webwebsted: www.bannerenengineering.com
- Telefon: Der henvises til webwebsted for regionale kontaktnumre.
- E-mail: Der henvises til webwebsted for support-e-mailadresser.
When contacting support, please have your product model number (R58ECRGB1Q) and a detailed description of the issue ready.
