Versa G088-Black

Versa Quad Watch Winder Instruction Manual

Model: G088-Black

Indledning

This manual provides comprehensive instructions for the Versa Quad Watch Winder, model G088-Black. Designed to keep your automatic timepieces accurately wound and ready for wear, this winder features advanced settings for optimal watch care. It is suitable for all kinds of automatic watches, ensuring they remain wound and precise.

Versa Quad Watch Winder in black, front view

Billede: Forside view of the Versa Quad Watch Winder, showcasing its sleek black design and four individual winding modules.

Nøglefunktioner

  • Longer lasting direct-drive motor specifically designed for watch winders. Watch winder motor has 3 settings for clockwise, counter clockwise, and bi-directional. 4 settings for Turns Per Day (650-850-1050-1250). The watch winder will turn for approximately 5 minutes, then rests varies depending on setting. This cycle will repeat while the watch winder is on. The watch winder is programmed not to turn continuously which will overwind your watch.
  • Independently control the settings for each winder. One watch per winder compared to other watch winders that hold two watches per winder which can risk damage to the watches when turning.
  • Spring action pillow to support various watch sizes with additional adapter to fit larger size watches.
  • Plenty of interior space for large and oversize watches.
  • Power adapter included (110-240V). 1 yr warranty. Please contact us if you need assistance with your watch winder.
Close-up of Versa Quad Watch Winder showing control panel, adjustable pillow, and spacious compartments

Billede: Detaljeret view highlighting the multiple settings on the control panel, the adjustable spring-action watch pillow, and the ample space within each winding compartment.

Opsætningsvejledning

1. Strømtilslutning

Connect the provided power adapter (110-240V) to the DC input port on the back of the winder and then plug it into a suitable electrical outlet. Ensure the connection is secure.

2. Placing Your Watch

Gently place your automatic watch onto the adjustable watch pillow. Ensure the watch is securely fitted around the pillow. The spring-action pillow accommodates various watch sizes, with an additional adapter provided to fit larger watches comfortably.

Versa Quad Watch Winder with four watches placed inside

Image: The watch winder with four automatic watches securely placed in their individual winding modules, ready for operation.

Diagram showing adjustable watch pillow with and without adapter

Image: A diagram illustrating how the adjustable watch pillow can be used with or without an additional adapter to fit different wristband sizes, from 6 to 8 inches.

Betjeningsvejledning

Turns Per Day (TPD) Settings

The Versa Quad Watch Winder offers four Turns Per Day (TPD) settings to accommodate various automatic watch movements. Select the appropriate TPD for your watch's specific requirements. The winder operates in cycles, turning for approximately 5 minutes and then resting, to prevent overwinding and ensure optimal winding efficiency.

TPD SettingBeskrivelse
650Minimum recommended turns for watches requiring less winding.
850Standard turns for many common automatic movements.
1050Higher turns for watches with more complex movements or lower power reserves.
1250Maximum turns for watches with high winding demands.

Retningsindstillinger

Choose from three directional settings based on your watch's winding requirements. Consult your watch manufacturer's specifications for the recommended winding direction.

RetningBeskrivelse
Med uret (CW)Winds the watch in a clockwise rotation.
Mod uret (CCW)Winds the watch in a counter-clockwise rotation.
TovejsWinds the watch in both clockwise and counter-clockwise rotations.

Uafhængig kontrol

Each of the four winder modules can be controlled independently. This allows you to customize the TPD and directional settings for different watches simultaneously, ensuring each timepiece receives its optimal winding.

Opretholdelse

To maintain your Versa Quad Watch Winder, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the winder is unplugged before cleaning. Keep the winder in a clean, dust-free environment to prevent debris from affecting its operation.

Fejlfinding

Watch Not Winding

If a watch is not winding, verify the power connection and ensure the winder is turned on. Check that the watch is securely seated on the pillow and that the correct TPD and directional settings are selected for your watch model. Some watches may require specific TPD or directional settings; consult your watch's manual.

Usædvanlig støj

A slight hum from the motor is normal during operation. If unusual or excessive noise occurs, ensure the winder is on a stable, flat surface and that no objects are obstructing the rotating mechanism. If the issue persists, contact customer support.

Watch Damage Prevention

This winder is designed with individual modules to prevent watches from hitting each other during operation. To avoid potential damage, always place only one watch per winder module.

Warning image showing two watches on a single winder, indicating potential damage

Image: A visual warning demonstrating the risk of damage when two watches are placed on a single winding motor, emphasizing the importance of using one watch per module.

Produktspecifikationer

FeatureDetalje
Produktdimensioner7 x 9.5 x 10 tommer
Varens vægt6.24 pund
VaremodelnummerG088-Black
FabrikantVersa
Strømindgang110-240V (Power adapter included)
Winding Capacity4 automatic watches (independent control)
TPD Settings650, 850, 1050, 1250
RetningsindstillingerClockwise, Counter-Clockwise, Bi-directional

Garanti og support

The Versa Quad Watch Winder comes with a 1 års garanti from the date of purchase. This warranty covers manufacturing defects and ensures proper functioning under normal use. Please retain your proof of purchase for warranty claims.

For assistance, technical support, or warranty inquiries, please contact Versa customer support through the retailer where the product was purchased or visit the official Versa webwebsted for kontaktoplysninger.

Udvidede beskyttelsesplaner

Extended protection plans are available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans offer peace of mind and can cover repairs or replacements for a longer duration.

  • 2-årig beskyttelsesplan: Fås for 18.99 USD
  • 3-årig beskyttelsesplan: Fås for 25.99 USD
  • Fuld beskyttelse: Monthly plan for $16.99, covering all eligible past and future purchases.

Relaterede dokumenter - G088-Black

Preview Versa Watch Winder G016 brugsanvisning
Instruktionsmanual til Versa G016 uroptrækkeren, med detaljerede specifikationer, funktioner, betjening og tips til optimal brug med forskellige urmærker.
Preview Versa G088 Uroptrækker: Brugsanvisning og brugervejledning
Omfattende brugsanvisning til Versa G088 uroptrækkeren, der dækker specifikationer, betjening, funktioner og tips til optimal uroptrækning. Inkluderer indstillinger for mærkekompatibilitet.
Preview Versa G078 uroptrækker brugsanvisning
Instruction manual for the Versa G078 watch winder, detailing specifications, features, operation, and tips for setting TPD and rotation direction for various watch brands.
Preview Versa G084 uroptrækker brugsanvisning
Omfattende instruktionsmanual til Versa G084 uroptrækkeren, med detaljerede specifikationer, funktioner, betjening og fejlfindingstips til automatisk uroptræk.
Preview Versa VW-DP Motion Sensor: Operation, Installation, and Specifications
Comprehensive guide to the Versa VW-DP Motion Sensor, covering its features, installation instructions, operational programming, walk test procedures, and technical specifications. Includes details on pet immunity and FCC compliance.
Preview Z-Wave Plug-in Dimmer Outlet Conformance Statement
This document details the Z-Wave Protocol Implementation Conformance Statement for the Versa Plug-in Dimmer Outlet, including product features, technical information, and supported command classes.