Reloop RP-8000 Advanced Hybrid Torque pladespiller brugermanual

Indledning

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-8000 Advanced Hybrid Torque Turntable. The RP-8000 combines traditional direct-drive turntable functionality with advanced digital control features, making it a versatile tool for DJs and audio enthusiasts.

Læs venligst denne manual grundigt, inden du bruger enheden, for at sikre korrekt brug og for at maksimere dens ydeevne og levetid.

Sikkerhedsinstruktioner

• Sørg for, at strømforsyningen matcher voltagde krav, der er specificeret på enheden.
• Udsæt ikke enheden for regn, fugt eller ekstreme temperaturer.
• Undgå at placere enheden i nærheden af ​​varmekilder eller i direkte sollys.
• Åbn ikke c'enasing; overlad al service til kvalificeret personale.
• Always disconnect the power cable before cleaning or moving the unit.
• Opbevares utilgængeligt for børn.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Hovedpladespiller
• Strømkabel
• USB kabel
• RCA Cable (with ground wire)
• slipmat
• Modvægt
• Headshell (cartridge not included)
• Brugervejledning (dette dokument)

Produkt overview

Familiarize yourself with the various components of your Reloop RP-8000 turntable.

Figur 1: Top-down view of the Reloop RP-8000 turntable, showcasing the platter, tone arm, pitch fader, and MIDI control section with performance pads.

Figur 2: Vinklet view of the Reloop RP-8000, highlighting the robust construction, the illuminated platter edge, and the integrated MIDI controls on the left side.

Figur 3: Rear panel of the Reloop RP-8000, showing the audio output (Phono/Line), USB ports (USB A and TT Link), power input, and power switch. Note the additional start/stop button for vertical setup.

Nøglekomponenter:

• Fad: Den roterende overflade, hvor plader placeres.
• Tonearm: Holds the cartridge and stylus, tracking the record's grooves.
• Pitch Fader: Adjusts the playback speed (BPM).
• Start/Stop-knapper: Controls platter rotation. An additional button is provided for battle setup.
• MIDI Control Section: Features a Trax encoder, 8 backlit drum pads, and mode selection buttons for software control.
• Phono/Line Output: RCA jacks for audio output, with a switch to select between phono (turntable level) and line (mixer/amp level) output.
• USB-porte: For connecting to a computer and linking multiple turntables.

Opsætning

1. Udpakning og placering

• Carefully remove the turntable from its packaging.
• Place the unit on a stable, level surface away from direct vibrations.
• Sørg for tilstrækkelig ventilation omkring enheden.

2. Tone Arm and Cartridge Assembly

• Attach your preferred headshell and cartridge (sold separately) to the tone arm.
• Install the counterweight onto the rear of the tone arm.
• Adjust the counterweight to balance the tone arm horizontally. Refer to your cartridge's instructions for recommended tracking force.
• Set the anti-skate dial to match the tracking force.

3. Forbindelser

• Lydforbindelse: Connect the RCA cables from the turntable's PHONO/LINE output to your mixer or amplivligere.
  • If connecting to a PHONO input on your mixer/amp, set the turntable's PHONO/LINE switch to FONO.
  • If connecting to a LINE input, set the turntable's PHONO/LINE switch to LINE.
  • Connect the ground wire to the ground terminal on your mixer/amp to reduce hum.
• USB-forbindelse: Connect the USB cable from the turntable's USB port to your computer for MIDI control and DVS (Digital Vinyl System) functionality.
• Turntable Link (TT Link): For linking multiple RP-8000 units, connect them in series using standard USB cables. Only one turntable needs to be connected to the computer.
• Strømtilslutning: Connect the power cable to the turntable and then to a suitable power outlet.

Betjeningsvejledning

1. Grundlæggende afspilning

1. Place a record on the platter and put the slipmat on top.
2. Select the desired speed (33, 45, or 78 RPM) using the speed selection buttons.
3. Tryk på START/STOP-knappen for at starte tallerkenrotationen.
4. Carefully lower the tone arm onto the record using the cue lever.
5. Adjust the pitch using the pitch fader as needed.

2. Pitch Control

• The pitch fader allows for precise adjustment of playback speed.
• Use the Pitch Range buttons (+/-8%, +/-16%, +/-50%) to select the desired pitch adjustment range.
• The LCD display shows the current pitch percentage.
• Press the Quartz Lock button to return the pitch to 0% (nominal speed).

3. MIDI Control and Performance Modes

The RP-8000 features an integrated MIDI control section for seamless integration with DJ software.

• Trax Encoder: Use this large encoder to browse through playlists and load tracks in your DJ software.
• Ydelsespuder: The 8 backlit drum pads offer various performance modes:
  • Hot Cue-tilstand: Trigger up to 8 hot cue points.
  • Løkketilstand: Set and trigger loops.
  • Sample tilstand: Access and play samples.
  • Brugertilstand: Freely assign MIDI functions to the pads and other control elements.
  • Dual Performance Mode: Activate two modes simultaneously (e.g., Hot Cue and Loop) by pressing their respective buttons. The pads will be split to control both functions.
• Turntable Link Mode: Connect up to four RP-8000 turntables via USB. The units automatically assign themselves to available decks in your DJ software, requiring only one USB connection to your computer.
• Omvendt knap: Instantly reverses platter rotation.
• Adjustable Start/Stop Time: Use the dedicated dials to fine-tune the platter's start and brake times for customized performance.

Opretholdelse

• Rensning: Use a soft, dry cloth to wipe down the unit. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the unit. Avoid abrasive cleaners.
• Styluspleje: Regularly clean your stylus with a soft brush designed for this purpose. Replace the stylus when it shows signs of wear to prevent damage to your records.
• Støvdæksel: Use a dust cover (if available) when the turntable is not in use to protect it from dust and debris.

Fejlfinding

If the problem persists after attempting these solutions, please contact Reloop customer support.

Specifikationer

Garanti og support

For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. Reloop offers various protection plans for extended coverage, which may be purchased separately.

For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact Reloop customer service through their official webwebstedet eller autoriserede distributører. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Note: The user manual (PDF) is also available for download at https://manuals.plus/m/8eb0b60ccb1c6d10ac93577b129a938bfbac889fdb461902d354afc8d19b78dd.