1. Introduktion
The Fieldpiece SPK3 is a versatile dual-temperature thermometer designed for HVACR professionals. It combines a folding rod temperature probe for in-duct measurements with an 8:1 infrared (IR) gun for non-contact surface temperature readings. This device features a convenient flip display, Max/Min, Hold, and T1-T2 functions, and a robust design for field use.
Image 1.1: The Fieldpiece SPK3 thermometer, showing its folding rod probe extended and the infrared sensor. The display shows temperature readings.
2. Opsætning
2.1 Batteriinstallation
- Find batteridækslet på bagsiden af enheden.
- Use a small screwdriver or coin to open the battery compartment.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-). The batteries are included with the device.
- Sæt batterirummets dæksel på igen og fastgør det.
2.2 Indledende tænding
Tryk på ON/OFF button to power on the device. The display will illuminate, and the thermometer will be ready for use.
3. Betjeningsvejledning
3.1 Generel drift
- Tænd/sluk: Tryk på ON/OFF knappen for at tænde eller slukke for enheden.
- Enhedsvalg: Tryk på ° C / ° F knappen for at skifte mellem temperaturenheder Celsius og Fahrenheit.
- Baggrundsbelysning: The display is backlit for visibility in low-light conditions.
3.2 Folding Rod (ROD) Mode
The folding rod probe is designed for accurate in-duct temperature measurements.
- Deploying the Probe: Gently unfold the rod probe from the main body of the thermometer. Detents will lock the probe into various open positions, allowing for partial or full extension.
- In-Duct Measurement: Insert the piercing tip of the rod into the ductwork. The rod hook allows the SPK3 to hang hands-free from registers or ductwork, providing stable readings.
- Skærmretning: The backlit display automatically flips its orientation when the unit is hung or positioned in ROD mode, ensuring readings are always upright.
3.3 Infrared (IR) Mode
The 8:1 infrared gun provides quick, non-contact surface temperature measurements.
- Activating IR: Point the infrared sensor (located at the top of the unit) towards the target surface.
- Måling: Tryk og hold på IR button to take a reading. The temperature will be displayed on the screen. Release the button to hold the reading.
- Afstand-til-sted-forhold: The 8:1 ratio means that at a distance of 8 inches, the measurement spot size is 1 inch. Ensure you are close enough to the target for accurate readings.
3.4 avancerede funktioner
- MAX / MIN: Tryk på MAX/MIN knap til view den maksimale eller minimale temperatur, der er registreret under en målesession.
- HOLDE: Tryk på HOLDE knappen for at fryse den aktuelle temperaturaflæsning på displayet. Tryk igen for at slippe.
- T1-T2: The SPK3 can quickly calculate the temperature difference between two readings (T1-T2) using either IR or ROD mode. Refer to the on-screen prompts for specific instructions on using this function.
4. Vedligeholdelse
4.1 Rengøring
To clean the SPK3, wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the unit in water. Ensure the infrared lens and probe tip are kept clean for accurate measurements.
4.2 Udskiftning af batteri
When the battery indicator appears on the display, replace the AAA batteries as described in Section 2.1.
4.3 Opbevaring
When not in use, fold the rod probe back into the body of the thermometer for protection. Store the unit in a dry environment, away from extreme temperatures and direct sunlight.
5. Fejlfinding
- Intet display/Enhed tænder ikke:
- Kontroller batteriinstallationen og sørg for korrekt polaritet.
- Udskift batterierne med nye.
- Inaccurate Readings (ROD Probe):
- Sørg for, at probespidsen er ren og fri for snavs.
- Allow sufficient time for the probe to stabilize to the measured temperature.
- Verify the probe is fully inserted into the measurement area.
- Inaccurate Readings (IR Gun):
- Ensure the IR lens is clean.
- Maintain the correct distance-to-spot ratio (8:1).
- Avoid measuring highly reflective surfaces, as IR thermometers may provide inaccurate readings on such materials.
- Display Not Flipping:
- Ensure the unit is in ROD mode and positioned appropriately for the automatic flip feature to engage.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnavn | SPK3 |
| Speciel funktion | Dual Probe, Non-Contact |
| Display Type | Digital |
| Forbindelsesteknologi | Infrarød |
| Strømkilde | Batteridrevet (2 AAA-batterier, medfølger) |
| Varens vægt | 5.3 ounce |
| Varelængde | 5 tommer |
| Øverste temperaturvurdering | 932 grader Fahrenheit |
| Lavere temperaturvurdering | 32 grader Fahrenheit |
| Svartid | 500 millisekunder |
| Immersion Depth (Rod) | 3.75 tommer |
| Ydermateriale | Stainless Steel, Aluminum, Polypropylene |
| Specifikation Met | CE, FCC, NIST |
| Gennemsnitlig batterilevetid | 3 timer |
7. Garanti og support
7.1 Garantioplysninger
The Fieldpiece SPK3 comes with a 1 års producentgaranti fra købsdatoen. Denne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.
7.2 Kundesupport
For technical assistance, troubleshooting, or warranty inquiries, please contact Fieldpiece customer support. Visit the official Fieldpiece webwebsted for kontaktoplysninger og yderligere ressourcer.
Online ressourcer: www.fieldpiece.com
