Mitsubishi Electric MJ-E14CG-S1 Affugter Brugermanual

1. Introduktion

Thank you for choosing the Mitsubishi Electric MJ-E14CG-S1 Dehumidifier. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and retain it for future reference.

2. Sikkerhedsoplysninger

For at sikre sikker drift skal du altid følge disse grundlæggende forholdsregler:

• Læs alle instruktioner før brug af apparatet.
• Brug ikke affugteren med en beskadiget ledning eller stik.
• Sørg for, at strømforsyningen overholder specifikationerne (220 V, 50 Hz).
• Hold apparatet væk fra vand og andre væsker.
• Stik ikke genstande ind i luftindtaget eller -udtaget.
• Tag stikket ud af enheden, før du rengør eller udfører vedligeholdelse.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de er blevet under opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed. .

3. Produktet er slutview

Familiarize yourself with the components and controls of your dehumidifier.

3.1 Foran View

Billedbeskrivelse: This image displays the front of the Mitsubishi Electric MJ-E14CG-S1 Dehumidifier. The unit is white with blue accents. A vertical transparent strip on the front indicates the water level in the collection tank. The control panel is visible at the top.

3.2 Kontrolpanel

Billedbeskrivelse: Et nærbillede view of the dehumidifier's top control panel. It features various buttons and a digital display. Key buttons include 'Power On/Off', 'Mode Selection' (with options like Minimum, Anti-mold, Low Temp, Auto), 'Humidity Level', 'Deflectors', 'Off/On Timer', 'Air Purifier', and 'Internal Drying'. An indicator for 'Tank Full' and 'Child Lock' are also visible.

3.3 Portability and Continuous Drain

Billedbeskrivelse: This image shows the dehumidifier being carried by its integrated top handle, highlighting its portability. It also illustrates the rear of the unit, where a continuous drainage port is located, allowing for direct water discharge without needing to empty the tank manually.

4. Opsætning

Følg disse trin for indledende opsætning:

1. Udpakning: Carefully remove the dehumidifier from its packaging. Retain packaging materials for future transport if needed.
2. Placering: Place the unit on a firm, level surface. Ensure there is at least 20 cm (8 inches) of clear space around the air inlet and outlet to allow for proper airflow. The unit is designed for areas up to 33 square meters.
3. Strømtilslutning: Sæt netledningen i en jordforbundet 220V, 50Hz stikkontakt.
4. Vandtank: Ensure the water collection tank is correctly inserted into the unit.

5. Betjeningsvejledning

The control panel allows you to manage various functions of your dehumidifier.

5.1 Tænd/sluk

• Tryk på SLUK / TÆND knappen for at tænde eller slukke for enheden.

5.2 Valg af tilstand

Tryk på SELEZIONE knap til at gennemgå tilgængelige driftstilstande:

• BIL: The unit automatically adjusts dehumidification based on the ambient humidity.
• MINIMO (Minimum): Operates at a lower fan speed for quieter operation.
• ANTIMUFFA (Anti-mold): Designed to prevent mold growth by maintaining optimal humidity levels.
• BASSA TEMP (Low Temp): Optimized for effective operation in cooler environments.
• BUCATO (Laundry): Maximizes dehumidification to help dry laundry faster indoors.

5.3 Indstilling af fugtighedsniveau

• Tryk på LIVELLO UMIDITA button to set your desired humidity level. The display will show the target percentage.

5.4 Timer funktion

• Brug OFF/ON TIMER button to set a specific time for the unit to turn on or off automatically.

5.5 Deflector Adjustment

• Tryk på DEFLETTORI button to adjust the direction of the airflow. Deflectors can be set to fixed positions or oscillate.

5.6 Luftrensning

• Aktiver PURIFICATORE D'ARIA function to circulate air through the filter, helping to remove dust and other particles.

5.7 Internal Drying

• De ASCIUGATURA INTERNA function helps dry the internal components of the dehumidifier, preventing mold and maintaining optimal performance. It typically runs for about an hour.

5.8 Håndtering af vandtank

• The unit has a 3-liter water tank. When the tank is full, the TARICA PIENA indicator will illuminate, and the unit will automatically shut off.
• Carefully remove the tank, empty the collected water, and reinsert it securely.
• For continuous operation, a continuous drainage hose can be connected to the port at the back of the unit (hose not included).

5.9 Børnelås

• To prevent unintended operation, activate the BLOCCO BAMBINI (Child Lock) function by pressing and holding the designated button (refer to control panel image for exact location).

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din affugters levetid og effektivitet.

6.1 Rengøring af luftfilter

The air filter should be cleaned regularly to maintain optimal performance.

1. Sluk og tag stikket ud af affugteren.
2. Fjern frontpanelet for at få adgang til luftfilteret.
3. Fjern forsigtigt filteret.
4. Wash the filter with mild detergent and water every 15 days.
5. Lad filteret tørre helt, før det sættes i igen.
6. The filter should be replaced after approximately 8 washes or when visibly worn.

6.2 Rengøring af vandtank

• Clean the water tank periodically with mild soap and water to prevent mold and bacterial growth. Rinse thoroughly.

6.3 Internal Drying Function

• Brug den ASCIUGATURA INTERNA function regularly, especially before storing the unit, to dry internal components and prevent odors or mold.

7. Fejlfinding

Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger:

• Enheden tænder ikke: Check if the power cord is securely plugged in. Ensure the power outlet is functional. Verify the water tank is correctly inserted and not full.
• Intet vand opsamlet: Check if the humidity level setting is lower than the current room humidity. Ensure the air filter is clean. Verify the room temperature is within the operating range.
• Enheden larmer: Ensure the unit is on a stable, level surface. Check for any obstructions in the air inlet or outlet. Clean the air filter if it is clogged.
• Dehumidification is insufficient: Ensure doors and windows are closed in the area of operation. Check if the room size exceeds the unit's capacity (33 square meters). Clean the air filter.
• Tank Full indicator remains on after emptying: Ensure the water tank is fully and correctly reinserted.

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the warranty card included with your product or contact Mitsubishi Electric customer service. Keep your purchase receipt as proof of purchase.