User Manual for FERMAX Loft Basic 3390 Home Telephone

1. Produktet er slutview

The FERMAX Loft Basic 3390 is a home telephone designed for VDS wiring systems, featuring a surface-mounted construction. This device facilitates audio communication between the outside and the apartment, and allows for door opening. Its design emphasizes simplicity and functionality, combining quality with a modern aesthetic. Constructed from impact-resistant ABS plastic, it boasts a textured, easy-to-clean surface and UV protection for enhanced durability and resistance to light exposure. Installation is quick and straightforward.

Figure 1: FERMAX Loft Basic 3390 Home Telephone. This image shows the white, rectangular unit with the brand name 'FERMAX' at the top right, a blue circular door release button, and a coiled telephone cord extending from the bottom.

2. Nøglefunktioner

• Model: FERMAX Loft Basic Home Telephone (3390)
• Ledningstype: VDS system compatibility
• Konstruktion: Surface-mounted for easy installation
• Funktionalitet: Audio connection for communication and door release
• Materiale: Durable ABS plastic with textured, easy-to-clean surface
• Beskyttelse: UV protection to prevent discoloration from light exposure

3. Installationsvejledning

3.1 Sikkerhedsforanstaltninger

• Always disconnect power to the intercom system before beginning installation.
• Ensure all wiring is performed by a qualified individual if you are unsure.
• Følg lokale elektriske regler og regler.

3.2 Montering af enheden

1. Choose a suitable location on the wall, typically near the entrance or in a central area of the apartment.
2. Mark the drilling points on the wall using the unit's mounting holes as a template.
3. Bor huller og isæt passende vægdyvler (hvis nødvendigt).
4. Secure the mounting bracket or the unit directly to the wall using screws.

3.3 Wiring (VDS System)

The FERMAX Loft Basic 3390 uses a VDS wiring system, which typically requires a simple 3-wire connection. Refer to the specific wiring diagram provided with your product packaging for precise connections, as configurations may vary slightly.

1. Identify the incoming VDS bus wires from your building's intercom system.
2. Connect the wires to the corresponding terminals on the FERMAX 3390 unit. Typically, these are data, power, and ground.
3. Sørg for, at alle forbindelser er sikre og korrekt isolerede.

3.4 Testing the System

1. Genopret strømmen til intercom-systemet.
2. Test the audio communication by initiating a call from the outdoor panel.
3. Verify that the door release function operates correctly when the button on the unit is pressed.

4. Betjening

4.1 Modtagelse af et opkald

When someone calls from the outdoor panel, the FERMAX Loft Basic 3390 will ring. Lift the handset to establish audio communication with the visitor.

4.2 Åbning af døren

During an active conversation or after receiving a call, press the blue circular button on the unit to activate the door release mechanism. The door will unlock, allowing the visitor to enter.

4.3 Private Communication

The system is designed to provide private communication between the indoor unit and the outdoor panel, ensuring your conversations are not overheard by other units in the building.

5. Pleje og vedligeholdelse

• Rensning: Brug en blød, damp cloth to clean the surface of the unit. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the ABS plastic and its UV protective coating.
• Fjernelse af støv: Regularly wipe down the unit to prevent dust buildup, especially around the handset and buttons.
• Miljøforhold: While the unit has UV protection, prolonged exposure to direct sunlight or extreme temperatures should be avoided to ensure longevity.

6. Fejlfinding

6.1 No Audio During Call

• Tjek ledninger: Ensure all 3 wires are securely connected to the terminals on the unit and at the main system connection point.
• Systemeffekt: Verify that the entire intercom system has power.
• Handset Placement: Ensure the handset is properly seated on the base when not in use.

6.2 Dør åbner ikke

• Knap funktionalitet: Press the door release button firmly. Listen for a click or hum from the door lock mechanism.
• Ledningsføring: Check the wiring specifically for the door release function.
• Systemstatus: Ensure the intercom system is active and not in a fault state.

6.3 No Ringing Sound

• Lydstyrkeindstillinger: Check if there are any volume controls or mute switches on the unit (though this model is basic, some systems have this).
• System Tilslutning: Confirm the unit is properly registered and connected to the building's intercom system.

If issues persist after performing these checks, it is recommended to contact a qualified technician or FERMAX customer support.

7. Tekniske specifikationer

8. Garanti og support

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official FERMAX webGarantibetingelserne kan variere afhængigt af region og forhandler.

For technical support, spare parts, or service inquiries, please contact FERMAX customer service directly. Contact details can typically be found on the manufacturer's webwebstedet eller i din produktemballage.