DuraVent SD9088

DuraVent DuraPlus Through-the-Wall Kit Instruction Manual

Model: SD9088

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of the DuraVent 6" DuraPlus Through-the-Wall Kit. This kit is designed for safe and efficient venting of wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas.

The DuraPlus chimney system features a triple-wall design with ceramic blanket insulation and air space, ensuring a cool exterior and hot interior for optimal draft and stove efficiency. Its design allows for expansion in case of a creosote fire, enhancing safety.

Important: Please read all instructions carefully before beginning installation or operation. Failure to follow these instructions could result in property damage, injury, or death.

Sættets indhold

The DuraVent 6" DuraPlus Through-the-Wall Kit includes the following components:

  • Væg fingerbøl
  • One 9-inch x 6-inch Horizontal Chimney Pipe
  • One Tee with Clean-out Cap
  • One Tee Support
  • Two Wall Straps
  • One Chimney Cap

Note: Additional DuraPlus chimney pipe sections are not included and may be required for your specific installation, supporting up to 40 feet of chimney pipe.

Components of the DuraVent DuraPlus Through-the-Wall Kit

Image: All components included in the DuraVent 6" DuraPlus Through-the-Wall Kit, laid out for inspection.

Opsætning og installation

Installation of the DuraVent DuraPlus Through-the-Wall Kit requires careful planning and adherence to local building codes and fire safety regulations. It is recommended to consult the official installation manual for detailed diagrams and step-by-step procedures.

Vigtige installationstrin:

  1. Planlægning og placering: Determine the optimal location for the through-the-wall penetration, ensuring proper clearances from combustible materials as per manufacturer specifications and local codes.
  2. Wall Thimble Installation: Install the wall thimble securely through the exterior wall. This component provides the necessary insulation and clearance for the chimney pipe passing through the wall.
    Close-up of a DuraVent chimney pipe connection

    Billede: Et nærbillede view of a DuraVent chimney pipe connection, illustrating the secure twist-lock design.

  3. Horizontal Pipe and Tee Assembly: Connect the 9-inch x 6-inch horizontal chimney pipe to the appliance and route it through the wall thimble. Attach the tee with the clean-out cap to the horizontal pipe on the exterior side.
  4. Tee Support and Wall Straps: Secure the tee support to the exterior wall to bear the weight of the vertical chimney sections. Use the provided wall straps to stabilize the vertical chimney pipe against the wall.
    Diagram showing proper installation of a chimney system through a wall

    Image: An illustrative diagram demonstrating the correct assembly and installation of the DuraVent through-the-wall chimney system, including the wall thimble and support components.

  5. Vertical Chimney Pipe (Not Included): Extend the chimney vertically using additional DuraPlus chimney pipe sections (sold separately) to achieve the required height above the roofline, ensuring proper draft and compliance with safety standards.
  6. Chimney Cap Installation: Install the chimney cap at the top of the vertical chimney run to prevent rain, debris, and animals from entering the flue.

For en omfattende vejledning henvises til den officielle Installationsmanual (PDF).

Driftsretningslinjer

Once installed, the DuraVent DuraPlus chimney system operates passively to vent combustion byproducts from your appliance. Proper operation primarily involves the correct use of the connected heating appliance and regular maintenance of the chimney system.

  • Apparatets drift: Always follow the operating instructions provided with your wood stove, fireplace, or other heating appliance.
  • Brændstoftype: Ensure you are using the correct and recommended fuel type for your appliance to minimize creosote buildup and ensure efficient combustion.
  • Udkast til ledelse: The DuraPlus system is designed to provide a hot draft. Monitor your appliance's performance to ensure adequate draft, which is crucial for efficient burning and preventing smoke spillage.

Opretholdelse

Regular maintenance is crucial for the safe and efficient operation of your DuraVent DuraPlus chimney system. This includes routine inspections and cleaning.

  • Rengøring af skorsten: Inspect the chimney and connector pipes regularly for creosote buildup. Creosote is a highly flammable substance that can lead to chimney fires. Cleaning frequency depends on usage and fuel type, but typically at least once per heating season.
    Indre view of a clean-out cap on a chimney tee

    Billede: Et interiør view of the clean-out cap on the chimney tee, showing how it can be removed for inspection and cleaning of the horizontal pipe section.

  • Komponentinspektion: Periodically check all connections, including the twist-lock joints, wall thimble, tee support, and wall straps, to ensure they remain secure and free from damage.
  • Chimney Cap: Ensure the chimney cap is clear of debris (leaves, bird nests, etc.) to maintain proper airflow.
  • Professionel inspektion: It is highly recommended to have your chimney system inspected by a certified chimney sweep annually.

Fejlfinding

This section addresses common issues that may arise with chimney systems. For complex problems, consult a qualified professional.

ProblemMulig årsagLøsning
Dårlig træk / Røgudslip
  • Chimney obstruction (creosote, debris)
  • Utilstrækkelig skorstenshøjde
  • Kold skorsten
  • Negative house pressure
  • Clean chimney and cap.
  • Extend chimney height if necessary.
  • Pre-heat flue with crumpled newspaper.
  • Ensure adequate combustion air supply.
Overdreven creosotopbygning
  • Afbrænding af ukrydret træ
  • Smoldering fires (low temperature)
  • Insufficient air supply to appliance
  • Burn dry, seasoned wood.
  • Maintain hot, active fires.
  • Ensure proper air intake for appliance.
  • Øg rengøringsfrekvensen.
Løse forbindelser
  • Vibration or settling
  • Forkert første installation
  • Inspect and re-secure all twist-lock joints and support components.
  • Consult installation manual for correct assembly.

Produktspecifikationer

AttributDetalje
ProduktnavnDuraVent 6" DuraPlus Through the Wall Kit
ModelnummerSD9088
MærkeDuraVent
Rør diameter6 tommer
Chimney TypeTriple-wall, All Fuel Chimney
IsoleringstypeCeramic blanket and air space
Maximum Supported Chimney PipeUp to 40 feet (additional pipe not included)
Produktdimensioner10 x 10 x 36 tommer
Varens vægt40 pund
FabrikantDuravent
OprindelseFremstillet i USA

Garantioplysninger

DuraVent products are manufactured to high standards. While specific warranty details are not provided in this manual, DuraVent typically offers a limited lifetime warranty on its DuraPlus chimney systems, covering defects in materials and workmanship. Please refer to the official DuraVent website or contact customer support for the most current and detailed warranty information applicable to your product.

Proper installation and maintenance as outlined in this manual and the official installation guide are often prerequisites for warranty coverage.

Support og kontakt

For further assistance, technical questions, or to report issues, please refer to the following resources:

  • Officiel installationsmanual: En detaljeret PDF-manual kan downloades her.
  • Fabrikant Webwebsted: Visit the DuraVent official webhjemmeside med produktinformation, ofte stillede spørgsmål og kontaktoplysninger.
  • Certified Professionals: For installation or complex troubleshooting, it is highly recommended to contact a certified chimney professional or HVAC specialist.

Relaterede dokumenter - SD9088

Preview DuraVent PelletVent installationsvejledning: Sikker og effektiv udluftning
Detaljeret installationsvejledning til DuraVent PelletVent-systemer. Lær om afstande, komponenter, installationsmetoder til pejse og lofter samt vedligeholdelsestips. Sørg for sikker drift af din pilleovn.
Preview Installationsvejledning til DuraPlus All-Fuel skorstenssystem
Omfattende installationsvejledning til DuraPlus All-Fuel skorstenssystem fra DuraVent, der dækker afstande, komponenter, forskellige installationstyper (loftstøttet, tagstøttet, T-støttet, muret pejs, pejs uden afstand), forskudt albuemontering, montering af udvidet tagbeslag, vedligeholdelse af skorsten og garantioplysninger.
Preview Installationsvejledning til DuraTech All-Fuel skorstenssystem (5 til 8 cm diameter)
Comprehensive installation guide for the DuraTech All-Fuel Chimney System (5" to 8" diameter), covering clearances, support requirements, various installation methods (ceiling, roof, wall, masonry, zero-clearance), and maintenance. Includes safety warnings and warranty information from DuraVent.
Preview DuraVent PelletVent installationsvejledning og produktoversigtview
Omfattende guide til DuraVent PelletVent, et UL-godkendt udluftningssystem til træpille- og oliefyr og indsatser. Indeholder installationsvejledning, komponentlister og tekniske specifikationer.
Preview DuraTech LDC 10"-24" All-Fuel, dobbeltvægget skorsten med stor diameter
DuraTech LDC er et dobbeltvægget skorstenssystem med stor diameter, der er designet til alle typer brændselsanlæg, herunder fabriksbyggede og murede pejse, ovne, kedler og andre apparater. Dette katalog indeholder detaljerede specifikationer, installationsvejledninger og tilgængelige komponenter.
Preview Installationsvejledning til konvertering af DuraVent Direct Vent-skorsten
Omfattende installationsvejledning til konvertering af klasse A metal- og murstensskorstene til et DuraVent Direct Vent-system. Indeholder sikkerhedsforanstaltninger, trinvise instruktioner og garantioplysninger.