Indledning
Thank you for choosing the Hygiplas Digital Refrigerator Freezer Thermometer. This device is designed to accurately monitor temperatures inside your refrigerator or freezer, providing essential information for food safety and optimal appliance performance. Its external display allows you to check temperatures without opening the door, minimizing temperature fluctuations. This manual provides detailed instructions for setup, operation, and maintenance.
Produktegenskaber
- High and low temperature alarm for critical temperature alerts.
- Flashing LEDs provide a visual alarm indication.
- Wide temperature range: -58°F to +158°F (-50°C to +70°C).
- Switchable display between Celsius (°C) and Fahrenheit (°F).
- Compact dimensions: 136mm (W) x 26mm (D).
- Digital display for clear temperature readings.
- Battery powered for flexible placement.
Opsætning
1. Batteriinstallation
The thermometer is powered by batteries. Locate the battery compartment, typically on the back or side of the unit. Insert the required batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
2. Placering
Position the main display unit outside your refrigerator or freezer. The unit often comes with a suction cup or magnetic backing for easy attachment to the appliance's exterior. Ensure the temperature probe cable is routed into the appliance without obstructing the door seal. The probe should be placed in the area where temperature monitoring is most critical, avoiding direct contact with food items or cold plates.
Image: The Hygiplas Digital Refrigerator Freezer Thermometer, showing its main display unit, external temperature probe, and suction cup for mounting. The display shows two temperature readings, and control buttons are visible on the left side.
Betjeningsvejledning
1. Tænd/sluk
The device typically powers on automatically upon battery insertion. If there is a power button, press it to turn the unit on or off.
2. Valg af temperaturenhed (°C/°F)
Locate the °C/°F button, usually on the front or side of the unit. Press this button to toggle between Celsius and Fahrenheit temperature displays.
3. Setting High/Low Alarms
Refer to the specific buttons on your device for alarm settings. Typically, there are "SET" or "ALARM" buttons, along with "UP" and "DOWN" arrows. Follow these general steps:
- Press the "SET" or "ALARM" button to enter alarm setting mode.
- Use the "UP" and "DOWN" buttons to adjust the desired high temperature limit.
- Press "SET" or "ALARM" again to confirm the high limit and move to the low temperature limit.
- Use "UP" and "DOWN" to adjust the desired low temperature limit.
- Press "SET" or "ALARM" one more time to save settings and exit alarm mode.
When the temperature exceeds the high limit or falls below the low limit, the alarm will sound, and the LEDs will flash.
Vedligeholdelse og pleje
Rensning
To clean the thermometer, wipe the main unit and the probe with a damp cloth. Do not immerse the main unit in water. Ensure the probe is clean before placing it back into the refrigerator or freezer. The probe is freezer safe.
Udskiftning af batteri
When the display becomes dim or the unit stops functioning, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen er tom eller svag. | Lave eller døde batterier. | Udskift batterierne med nye, og sørg for korrekt polaritet. |
| Forkert temperaturaflæsning. | Probe improperly placed or damaged. | Ensure the probe is securely connected and positioned correctly. Avoid placing it directly against cold surfaces or heating elements. If damaged, contact support. |
| Alarmen lyder ikke. | Alarm settings incorrect or alarm function disabled. | Verify alarm settings are correctly configured. Check if the alarm volume is audible or if there's a mute function enabled. |
| Unit not responding to buttons. | Temporary software glitch or low batteries. | Remove and reinsert batteries to reset the unit. If the issue persists, replace batteries. |
Specifikationer
- Mærke: Hygiplas
- Modelnavn: 8541986011
- Speciel funktion: Alarm
- Skærmtype: Digital
- Temperaturområde: -58°F til +158°F (-50°C til +70°C)
- Strømkilde: Batteridrevet
- Ydermateriale: Plast
- Produktdimensioner: Approximately 5.35 inches (Length) / 136mm (Width) x 26mm (Depth)
- Produktpleje: Frysebeskyttet, tørres af
- Anvendelse: Indendørs
- Genanvendelighed: Genanvendelig
Garanti og support
For warranty information or technical support, please refer to the product packaging or contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.
For yderligere hjælp kan du besøge Hygiplas brand page on Amazon.
