1. Introduktion
This manual provides comprehensive instructions for the safe and efficient operation of your SATO Promo Touch 33 Label Dispenser. Please read this manual thoroughly before using the device and retain it for future reference.
The SATO Promo Touch 33 is a hand applicator designed for dispensing labels with notched backing paper or TX liquor stamps.
Figure 1: The SATO Promo Touch 33 Label Dispenser, a handheld device for applying labels.
2. Opsætning
2.1 Udpakning
Carefully remove the label dispenser from its packaging. Inspect the device for any signs of damage during transit. If any damage is observed, contact your supplier immediately.
2.2 Ilægning af etiketter
- Ensure the label roll is compatible with the dispenser (notched backing paper or TX liquor stamps).
- Locate the label roll holder on the dispenser.
- Place the label roll onto the holder, ensuring the labels feed from the top and the backing paper is positioned correctly for dispensing.
- Thread the leading edge of the label strip through the dispenser mechanism as indicated by any arrows or guides on the device. Ensure the labels are flat and not creased.
- Pull the label strip until a label is presented at the dispensing edge.
3. Betjeningsvejledning
3.1 Dispensing Labels
- Hold the dispenser firmly by the handle.
- Position the dispensing edge of the applicator over the surface where the label is to be applied.
- Press the trigger or lever mechanism to advance the label. As the label advances, the backing paper will peel away, leaving the adhesive label exposed.
- Smoothly apply the label to the desired surface.
- Release the trigger/lever to prepare for the next label.
3.2 Bedste praksis
- Apply labels to clean, dry, and smooth surfaces for optimal adhesion.
- Avoid excessive force when pressing the trigger to prevent damage to the labels or the dispenser.
- Regularly check the label roll for proper alignment to prevent jams.
4. Vedligeholdelse
4.1 Rengøring
- Periodically wipe the exterior of the dispenser with a soft, dry cloth.
- Remove any adhesive residue or paper dust from the label path and dispensing mechanism using a soft brush or compressed air.
- Do not use harsh chemicals or abrasive cleaners, as these may damage the device.
4.2 Opbevaring
Store the SATO Promo Touch 33 Label Dispenser in a clean, dry environment away from direct sunlight and extreme temperatures when not in use.
5. Fejlfinding
This section addresses common issues you may encounter with your label dispenser.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Labels not dispensing correctly | Incorrect label loading; label roll jammed; adhesive residue on mechanism. | Re-load labels according to Section 2.2; clear any jams; clean the dispensing mechanism (Section 4.1). |
| Labels not adhering | Surface is dirty, oily, or uneven; labels are expired or damaged. | Ensure surface is clean and dry; use fresh labels. |
| Difficulty pressing trigger | Mechanism obstructed; internal component issue. | Check for foreign objects; if issue persists, contact support. |
Hvis du støder på problemer, der ikke er nævnt her, eller hvis de foreslåede løsninger ikke løser problemet, bedes du kontakte kundesupport.
6. Specifikationer
- Model: SATO Promo Touch 33
- Varenummer: WA4002501
- Type: Håndapplikator
- Compatible Labels: Notched backing paper labels, TX liquor stamps
- Materiale: Paper (for labels, dispenser material not specified but implied durable plastic/metal)
- Fabrikant: SATO
7. Garanti og support
7.1 Garantioplysninger
Specific warranty details for the SATO Promo Touch 33 Label Dispenser are typically provided at the point of purchase or included with the product packaging. Please refer to your purchase documentation for warranty terms and conditions.
7.2 Kundesupport
For technical assistance, spare parts, or further inquiries, please contact your authorized SATO dealer or visit the official SATO website. When contacting support, please have your model number (WA4002501) and purchase information readily available.
SATO Official Webwebsted: www.sato-global.com
