Gravity GR-EQ9

Gravity 7 Band Graphic Equalizer GR-EQ9

Brugermanual

1. Introduktion

Thank you for choosing the Gravity 7 Band Graphic Equalizer GR-EQ9. This equalizer is designed to provide precise control over your car audio system, allowing you to fine-tune sound frequencies for an enhanced listening experience. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

2. Sikkerhedsoplysninger

3. Pakkens indhold

Verify that all items are present in your GR-EQ9 package:

Gravity GR-EQ9 mounting accessories including brackets, screws, and wiring harness.

Image: Included mounting brackets, screws, and wiring harness for the GR-EQ9.

4. Produktet er slutview

4.1. Kontroller på frontpanelet

Front panel of the Gravity GR-EQ9 showing all rotary knobs and input selector.

Billede: Top view of the GR-EQ9 front panel with all controls.

4.2. Bagpaneltilslutninger

Rear panel of the Gravity GR-EQ9 showing RCA inputs and outputs, and power terminals.

Image: Close-up of the GR-EQ9 rear panel connections.

5. Opsætning

5.1. Installation

The GR-EQ9 is designed for flexible installation in various vehicle locations. Consider a location that allows for easy access to controls and proper ventilation.

Diagram showing how to mount the Gravity GR-EQ9 using brackets and screws.

Image: Mounting diagram for the GR-EQ9.

  1. Choose a suitable mounting location (e.g., under the dashboard, in the center console).
  2. Use the provided mounting brackets as a template to mark screw holes.
  3. Drill pilot holes and secure the brackets using the supplied screws.
  4. Attach the GR-EQ9 unit to the mounted brackets.

5.2. Ledninger

Proper wiring is crucial for optimal performance and safety. Ensure all connections are secure and correctly polarized.

  1. Strømtilslutning (+12V): Connect the +12V wire from the equalizer to a constant +12V power source from the vehicle's battery. Use an inline fuse (not supplied) for protection. The unit operates between 9V and 16V.
  2. Jordforbindelse (GND): Connect the GND wire to a clean, unpainted metal surface on the vehicle chassis.
  3. Fjerntænding (REM): Connect the REM wire to the remote output of your head unit. This will turn the equalizer on and off with your car's audio system.
  4. RCA-indgange: Connect the RCA output from your head unit to the HOVED IN (L/R) inputs on the GR-EQ9. If using an auxiliary device, connect its RCA output to the AUX IN (L/R) inputs.
  5. RCA udgange: Tilslut FRONT UD (L/R), RÆK UD (L/R), and SUB UD (L/R) from the GR-EQ9 to the corresponding inputs on your amplivførere.

6. Betjeningsvejledning

Once installed, the GR-EQ9 allows for precise audio customization.

  1. Tænd: The unit will power on automatically when the remote turn-on signal is received from your head unit.
  2. Valg af input: Brug AUX/CD Selector button to switch between your main audio source (CD) and the auxiliary input (AUX).
  3. Lydstyrkekontrol: Juster BIND knob to set the overall listening level.
  4. Subwoofer kontrol:
    • Brug UNDERNIVEAU knob to control the output volume of your subwoofer.
    • Juster SUBFREKVENS knob to set the low-pass crossover point for the subwoofer, typically between 60Hz and 90Hz, to blend with your main speakers.
  5. Equalizer justeringer: Use the seven individual frequency knobs (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 16KHz) to boost or cut specific frequency ranges. Adjust these to tailor the sound to your preference and vehicle acoustics. Each band offers a range of -12dB to +12dB.
  6. Fader kontrol: De FADER knob allows you to adjust the balance of sound between your front and rear speakers.
  7. Justering af indgangsniveau: Brug HIGH LEVEL / MAIN LEVEL switch and corresponding knobs to match the input signal level from your head unit, preventing distortion.

7. Vedligeholdelse

8. Fejlfinding

ProblemMulig årsagLøsning
Ingen strømBlown fuse; incorrect wiring; no remote signal.Check and replace fuse; verify +12V, GND, and REM connections.
Ingen lydForkerte RCA-forbindelser; amplifier not powered; input source issue.Verify all RCA cables are connected correctly; ensure amplifiers are on; check head unit output.
Forvrænget lydInput level too high; equalizer settings too extreme; poor grounding.Adjust input level using HIGH LEVEL/MAIN LEVEL controls; reduce EQ boost; check ground connection.
Noise/HissPoor grounding; RCA cables too close to power wires; gain settings too high.Ensure proper grounding; reroute RCA cables away from power wires; adjust ampindstillinger for forstærkning.

9. Specifikationer

10. Garanti

This Gravity product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or contact customer support for specific terms and conditions. Keep your proof of purchase for warranty claims.

11. Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Gravity customer support. Contact details can typically be found on the product packaging or the official Gravity webwebsted.

Relaterede dokumenter - GR-EQ9

Preview Brugermanual til Gravity GT1 Smartwatch
Omfattende brugermanual til Gravity GT1 smartwatch. Denne guide dækker den indledende opsætning, opladning, parring med din smartphone, navigationsfunktioner og grundlæggende fejlfinding.
Preview Gravity Eye Massager: Funktioner, specifikationer, introduktion og sikkerhedsvejledning
Omfattende guide til Gravity Eye Massager. Lær om dens funktioner, tekniske specifikationer, hvordan du kommer i gang, tips til fejlfinding og vigtige sikkerhedsoplysninger for optimal brug.
Preview Gravity SP 3202 studiemonitorhøjttalerstativ: Sikkerhed, funktioner og specifikationer
Omfattende guide til Gravity SP 3202 studiemonitorhøjttalerstativet, der dækker sikkerhedsinstruktioner, funktioner, detaljerede specifikationer, garantioplysninger og korrekt bortskaffelse. Indeholder tekstlige beskrivelser af visuelle elementer.
Preview Brugermanual til Gravity GT8 Smart Watch | Funktioner, opsætning og vejledning
Omfattende brugermanual til Gravity GT8 Smart Watch. Lær om funktioner, GPS, sundhedssporing, tilslutningsmuligheder, opsætning og betjening. Få mest muligt ud af dit GT8 smartwatch.
Preview Gravity Premium Stands Katalog - Mikrofon, Højttaler, Belysning & Mere
Oplev Gravity-serien af ​​premium stativer og tilbehør til lyd, belysning og musikinstrumenter. Dette katalog indeholder mikrofonstativer, højttalerstativer, belysningsstativer, keyboardstativer, guitarstativer og multimedieudstyr, alt designet og konstrueret i Tyskland af Adam Hall Group.
Preview DRI0056 Lineær Motor Driver PCB Layout Information
Detaljeret printkortlayoutdiagram og specifikationer for DRI0056 lineærmotordriver fra Gravity. Inkluderer dimensioner, lagantal, loddemaske, silketrykfarver og komponentplacering overviewHar I2C-grænseflade og tyngdekraftssensor.