EGLO 86996A Nikita væg- eller loftslampe brugsanvisning

Indledning

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO 86996A Nikita Wall or Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

The EGLO Nikita light fixture features a transitional design with a matte nickel finish and satin glass accents, suitable for both wall and ceiling mounting.

Vigtige sikkerhedsoplysninger

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.

Always consult a qualified electrician if you are unsure about the installation process. Ensure all wiring connections are secure and comply with local electrical codes.

Dette produkt er kun beregnet til indendørs brug. Må ikke udsættes for fugt eller ekstreme temperaturer.

Forslag 65 Advarsel: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please check your local laws before purchasindette produkt.

Hvad er der i æsken

• Light Fixture (EGLO 86996A Nikita)
• Installation Hardware (screws, wire nuts, mounting bracket) - (Standard components, may vary slightly)
• Instruktionsmanual

Note: 1x100W Halogen bulb is ikke inkluderet og skal købes separat.

Opsætning og installation

This section outlines the general steps for installing the EGLO 86996A light fixture. Specific details may vary based on your electrical box and mounting surface. Always ensure power is OFF before beginning installation.

Nødvendige værktøjer (ikke inkluderet):

• Skruetrækker (Phillips og/eller flad)
• Trådstrippere
• Tang
• Elektrisk tape
• Sikkerhedsbriller

Installationstrin:

1. Sluk for strømmen: Locate the circuit breaker or fuse box that supplies power to the installation location. Turn off the power completely. Verify power is off using a voltage tester.
2. Forbered monteringsoverfladen: If replacing an existing fixture, carefully remove it. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
3. Fastgør monteringsbeslag: Secure the fixture's mounting bracket to the electrical box using the provided screws. Ensure it is firmly attached.
4. Foretag elektriske forbindelser:
   • Tilslut green or bare copper ground wire from the fixture to the ground wire from the electrical box (usually bare copper or green). Secure with a wire nut.
   • Tilslut hvid ledning from the fixture to the white (neutral) wire from the electrical box. Secure with a wire nut.
   • Tilslut sort ledning from the fixture to the black (hot) wire from the electrical box. Secure with a wire nut.

   Ensure all wire nuts are tightly secured and no bare wire is exposed. Wrap connections with electrical tape for added security.
5. Monter armaturet: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall or ceiling.
6. Installer pære: Insert one 100W Halogen bulb (not included) into the socket. Do not exceed the maximum wattage.
7. Gendan strøm: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker or fuse box.

Billede: Forside view of the EGLO 86996A Nikita Wall or Ceiling Light in matte nickel finish.

Image: The EGLO 86996A Nikita light fixture mounted on a blue wall, illustrating its up/down lighting effect.

Image: The EGLO 86996A Nikita light fixture integrated into a modern living room, demonstrating its aesthetic appeal.

Image: Dimensional drawing of the EGLO 86996A Nikita light, showing length (8.86"), width (3.15"), and height (4.92").

Operation

The EGLO 86996A Nikita light fixture operates via a standard wall switch (not included) connected to your household electrical system. It is designed for 120 Volts AC power.

• Tænd/sluk: Brug vægkontakten til at tænde eller slukke lysarmaturet.
• Pære type: This fixture requires one 100W Halogen bulb (not included). Halogen bulbs can generate significant heat.
• Dæmpbar: The fixture is dimmable if connected to a compatible dimmer switch and using dimmable halogen bulbs.

Opretholdelse

Regelmæssig vedligeholdelse sikrer din lampes levetid og optimale ydeevne.

• Rensning: Before cleaning, ensure the power is turned off and the fixture has cooled down. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Udskiftning af pære:
  1. Sluk for strømmen til armaturet ved afbryderen.
  2. Lad pæren køle helt af, før du rører ved den.
  3. Carefully remove the old bulb.
  4. Insert a new 100W Halogen bulb. Avoid touching the new halogen bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or glove.
  5. Gendan strømmen.
• Inspektion: Periodically check for any loose wiring or damaged components. If any damage is found, discontinue use and consult a qualified electrician.

Fejlfinding

If you encounter issues with your EGLO 86996A light fixture, refer to the following common troubleshooting steps:

Hvis disse trin ikke løser problemet, skal du kontakte kundesupport eller en kvalificeret elektriker.

Specifikationer

Garantioplysninger

This product comes with a Manufacturer's Warranty. For specific details regarding coverage, duration, and claims process, please refer to the warranty documentation included with your purchase or contact EGLO customer support directly.

Kundesupport

For further assistance, technical support, or inquiries regarding your EGLO 86996A Nikita Wall or Ceiling Light, please contact EGLO customer service.

You can often find contact information on the EGLO official webhjemmeside eller gennem din forhandler.

Online ressourcer: Visit the EGLO Store on Amazon

Produkt video