UNICO L-TTR100 Model Rock-IT Jr. Tube Rocker Instruction Manual

1. Introduktion

Thank you for choosing the UNICO L-TTR100 Model Rock-IT Jr. Tube Rocker. This device is designed for efficient and gentle mixing of samples in laboratory tubes and vials. It is a heavy-duty, quiet mixer built for reliable daily use. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tube rocker.

2. Sikkerhedsoplysninger

Please read all safety instructions carefully before operating the device to prevent injury or damage to the equipment.

• Tilslut altid enheden til en jordet stikkontakt med den korrekte lydstyrke.tage (110V).
• Brug ikke enheden i vådt eller damp forhold.
• Sørg for, at enheden er placeret på en stabil, plan overflade.
• Do not overload the tube capacity.
• Afbryd strømmen før rengøring eller udførelse af vedligeholdelse.
• Hold hænder og løstsiddende tøj væk fra bevægelige dele under drift.
• This device is intended for laboratory use only.

3. Produktet er slutview

The UNICO L-TTR100 Rock-IT Jr. Tube Rocker is designed for gentle, continuous mixing of samples. Key features include:

• Heavy-duty and quiet operation.
• Capacity for 8 tubes or vials.
• Fixed speed of 25 rocking cycles per minute (CPM).
• Reversible and autoclavable tube pad for easy cleaning and sterilization.
• Integrated pause button for temporary halt of operation.

3.1 Komponenter

• Hovedenhed (base)
• Tube Rocking Platform
• Reversible/Autoclavable Tube Pad
• Tænd/sluk -knap (tænd/sluk)
• Pause knap
• Strømledning

Figur 1: The UNICO L-TTR100 Rock-IT Jr. Tube Rocker, showing its main body, rocking platform, and capacity for multiple test tubes. The power switch is visible on the front, and the red pause button is on the side.

4. Opsætning

1. Udpakning: Carefully remove the tube rocker from its packaging. Inspect the unit for any signs of damage during transit. Report any damage to your supplier immediately.
2. Placering: Place the tube rocker on a clean, stable, and level laboratory bench or workstation. Ensure there is adequate space around the unit for ventilation and operation.
3. Strømtilslutning: Connect the power cord to the power inlet on the back of the unit, then plug the other end into a grounded 110V AC power outlet.
4. Tube Pad Installation: Ensure the reversible tube pad is correctly seated on the rocking platform. The pad can be reversed for different tube sizes or for cleaning.

5. Betjeningsvejledning

1. Loading Tubes: Place your test tubes or vials into the grooves of the tube pad on the rocking platform. Ensure tubes are securely seated and do not exceed the 8-tube capacity. Distribute the load evenly if possible.
2. Tænd: Flip the main power switch located on the front of the unit to the "ON" position. The rocking motion will begin immediately at a fixed speed of 25 CPM.
3. Using the Pause Button: To temporarily stop the rocking motion without turning off the unit, press the red pause button located on the side of the unit. Press it again to resume operation.

Figur 2: A hand demonstrating the use of the red pause button on the side of the UNICO L-TTR100 Tube Rocker. This button allows for temporary cessation of the rocking motion.
4. Stop af drift: To stop the rocking motion completely, flip the main power switch to the "OFF" position.
5. Unloading Tubes: Once the unit has stopped, carefully remove the mixed tubes or vials from the platform.

6. Vedligeholdelse

Regular cleaning and proper care will ensure the longevity and optimal performance of your tube rocker.

• Rengøring af enheden: Disconnect the power cord before cleaning. Wipe the exterior surfaces of the unit with a soft, damp cloth. For stubborn stains, a mild detergent can be used. Avoid abrasive cleaners or solvents. Ensure no liquid enters the internal components.
• Cleaning the Tube Pad: The tube pad is reversible and autoclavable. It can be removed for thorough cleaning or sterilization. Wash with soap and water, or sterilize using an autoclave according to standard laboratory procedures. Ensure the pad is completely dry before re-installing.
• Inspektion: Periodically inspect the power cord for any signs of damage. Check the rocking mechanism for any unusual noises or resistance.
• Opbevaring: When not in use for extended periods, store the unit in a clean, dry environment away from direct sunlight and extreme temperatures.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på. Hvis problemet fortsætter, skal du kontakte kundesupport.

8. Specifikationer

9. Garantioplysninger

UNICO products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please refer to the warranty card included with your product or contact UNICO customer support for detailed warranty information. Keep your proof of purchase for warranty claims.

10. Kundesupport

For technical assistance, spare parts, or warranty inquiries, please contact UNICO customer support:

• Webwebsted: Visit the UNICO Store on Amazon (for generel produktinformation)
• Se produktemballagen eller den medfølgende dokumentation for direkte kontaktoplysninger (telefon/e-mail).

When contacting support, please have your model number (L-TTR100) and purchase date available.