1. Introduktion
This manual provides essential information for the safe installation, operation, and maintenance of your Philips 28096-6 17W Fluorescent LampLæs venligst disse instruktioner omhyggeligt inden brug, og gem dem til senere brug.
The Philips 28096-6 is a 17-watt fluorescent lamp designed for general lighting applications. It features a 5000 Kelvin color temperature, providing a cool white light, and has a color rendering index (CRI) of 82, ensuring good color perception. The average lifespan of this lamp er 30,000 timer.
2. Sikkerhedsoplysninger
ADVARSEL: For at mindske risikoen for elektrisk stød, brand eller personskade skal du altid følge disse sikkerhedsforanstaltninger.
- Afbryd strømmen: Always turn off the power at the circuit breaker or fuse box before installing, removing, or servicing the lamp.
- Korrekt montering: Brug denne lamp only in fixtures designed for fluorescent lamps of the specified wattage and type (T8).
- Håndteres med forsigtighed: Fluorescerende lamps contain a small amount of mercury. Handle with care to avoid breakage. In case of breakage, ventilate the area and clean up carefully according to local regulations.
- Bortskaffelse: Bortskaf brugt lamps according to local environmental regulations. Do not dispose of in regular household waste.
- Undgå kontakt: Rør ikke ved lamp med våde hænder.
- Kun indendørs brug: Denne lamp is intended for indoor use in dry locations unless otherwise specified by the fixture.
3. Opsætning og installation
Follow these steps to install your Philips 28096-6 fluorescent lamp:
- Sluk for strømmen: Ensure the power supply to the fixture is completely turned off at the circuit breaker or fuse box.
- Fjern gammel Lamp (hvis relevant): Carefully twist the old fluorescent lamp 90 grader og træk den forsigtigt ud afampindehavere.
- Indsæt ny Lamp: Align the pins of the new Philips 28096-6 lamp with the slots in the lampholders. Gently push the lamp ind i lampholders until the pins are fully seated, then twist the lamp 90 degrees to lock it into place. Ensure the lamp sidder sikkert.
- Gendan strøm: Når den lamp is securely installed, restore power to the fixture from the circuit breaker or fuse box.
- Prøve: Tænd lyskontakten for at kontrollere, at den fungerer korrekt.
Figure 1: Philips 28096-6 17W Fluorescent Lamp. This image shows the tubular shape and pin connectors typical of a T8 fluorescent lamp.
4. Betjeningsvejledning
The Philips 28096-6 fluorescent lamp operates immediately upon receiving power from a compatible fixture. Simply use the wall switch or fixture control to turn the light on or off.
Denne lamp is designed for consistent performance over its rated lifespan when used within its specified operating conditions.
5. Vedligeholdelse
Minimal maintenance is required for the Philips 28096-6 fluorescent lamp.
- Rensning: Ensure the power is off before cleaning. Gently wipe the lamp med en blød, tør eller let damp cloth to remove dust. Do not use abrasive cleaners or solvents.
- Udskiftning: Udskift lamp when it reaches the end of its useful life (indicated by flickering, dimming, or failure to light). Follow the installation steps in Section 3 for replacement.
6. Fejlfinding
If your Philips 28096-6 lamp is not functioning correctly, consider the following:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp lyser ikke. |
|
|
| Lamp flimrer. |
|
|
7. Specifikationer
Detailed specifications for the Philips 28096-6 17W Fluorescent Lamp:
- Modelnummer: 28096-6
- Wattage: 17 watt
- Lystype: Fluorescerende
- Pæreform Størrelse: T8
- Speciel funktion: F17T8/TL850 ALTO Plus Straight T8
- Farvetemperatur: 5000 Kelvin (Cool White)
- farvegengivelsesindeks (CRI): 82
- Lysstyrke: 1235 lumen
- Gennemsnitlig levetid: 30,000 timer
- Produktdimensioner: Cirka 24 x 1.25 x 1.25 tommer
- Varens vægt: 3.2 ounce
- Kontrolmetode: App (Note: This refers to smart home integration capabilities of some systems, not the bulb itself. The bulb is controlled by a standard switch.)
Figur 2: Eksample of an energy efficiency label, often associated with lighting products, indicating performance metrics.
8. Garanti og support
For garantioplysninger og kundesupport henvises til den officielle Philips- webwebstedet eller kontakt din forhandler. Gem din købskvittering som købsbevis.
Philips Customer Service: For technical assistance or product inquiries, please visit the Philips support website or contact their customer service line (details typically found on product packaging or the official Philips webwebsted).
