Rabalux 3353 Alabastro Ceiling Lamp Brugermanual

1. Introduktion

This manual provides essential information for the safe installation, operation, and maintenance of your Rabalux 3353 Alabastro Ceiling Lamp. Please read these instructions carefully before installation and retain them for future reference.

1.1. Sikkerhedsoplysninger

• Afbryd altid strømforsyningen før installation, vedligeholdelse eller udskiftning af pære.
• Installation should be performed by a qualified electrician to ensure compliance with local wiring regulations.
• Overskrid ikke det maksimale wattage specificeret for pærerne.
• Sørg for at lamp is securely mounted to a suitable ceiling structure.
• Dette produkt er kun beregnet til indendørs brug (IP20-klassificering).

2. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Rabalux 3353 Alabastro Ceiling Lamp body (metal frame)
• Glass shade (alabaster/bronze claw finish)
• Mounting hardware (screws, wall plugs, mounting bracket)
• Brugsanvisning

Bemærk: Pærer er ikke inkluderet og skal købes separat.

3. Opsætning og installation

Follow these steps for safe and proper installation of your ceiling lamp.

3.1. Forinstallation

1. Turn off the main power supply at the circuit breaker or fuse box.
2. Unpack all components and inspect for any damage. Do not install if damaged.
3. Identify the desired mounting location on the ceiling. Ensure it can support the weight of the lamp.

3.2. Montering af Lamp

1. Attach the mounting bracket to the ceiling using the provided screws and wall plugs. Ensure it is firmly secured.
2. Connect the electrical wires from the ceiling to the lamp's terminal block. Ensure correct polarity (Live to Live, Neutral to Neutral, Earth to Earth).
3. Løft forsigtigt lamp body and secure it to the mounting bracket.
4. Install two E27 bulbs (max 60W each) into the lamp indehavere.
5. Fastgør glasskærmen til lamp krop, hvilket sikrer, at den er forsvarligt fastgjort.

Figur 1: Lamp Dimensions (Diameter: 400mm)

Figure 2: Rabalux 3353 Alabastro Ceiling Lamp

4. Betjeningsvejledning

Once installed, the Rabalux 3353 Alabastro Ceiling Lamp is operated via a standard wall switch.

4.1. Tænd/sluk

Flip the wall switch connected to the lamp for at tænde eller slukke for den.

4.2. Dæmpningsfunktion

Denne lamp is dimmable. If connected to a compatible dimmer switch and using dimmable E27 bulbs, you can adjust the light intensity according to your preference. Refer to your dimmer switch's instructions for specific operation.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din bils levetid og optimale ydeevne.amp.

5.1. Rensning

• Afbryd altid strømmen før rengøring.
• Wipe the metal and glass surfaces with a soft, dry, or slightly damp klæde.
• Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen.

5.2. Udskiftning af pære

• Sørg for at lamp is cool and power is disconnected.
• Fjern forsigtigt glasskærmen.
• Unscrew the old E27 bulb and screw in a new one. Ensure the new bulb does not exceed 60W.
• Reattach the glass shade securely.

For information on cleaning and disposing of broken or deteriorated bulbs, please consult local guidelines.

6. Fejlfinding

Hvis du støder på problemer med din lamp, try these basic troubleshooting steps:

• Lamp tænder ikke: Check if the power supply is connected and the wall switch is on. Verify that the bulbs are correctly installed and not faulty. Check the circuit breaker.
• Dæmpning virker ikke: Ensure you are using dimmable E27 bulbs and a compatible dimmer switch.
• Flimrende lys: This could indicate a loose bulb, an incompatible dimmer, or a faulty bulb.

If problems persist after performing these checks, consult a qualified electrician.

7. Specifikationer

Figure 3: EU Energy Label Compatibility

8. Garanti og support

For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Rabalux webwebsted. Du kan også besøge Rabalux Brand Store for flere produkter og information.