1. Introduktion
The Woods 50021 Mechanical 24-Hour Programmable 2 Outlet Timer is designed to automate the operation of indoor lights and appliances. This device allows you to set specific ON/OFF times, repeating daily, to enhance convenience and manage energy consumption. It features a manual override for immediate control without altering programmed settings.
2. Vigtige sikkerhedsoplysninger
- Kun indendørs brug: Denne timer er beregnet til indendørs brug på tørre steder. Må ikke udsættes for vand eller fugt.
- Elektrisk vurdering: Do not exceed the electrical ratings of the timer (125Vac 60Hz, 15A / 1875W Resistive, 8A / 1000W Tungsten, 5A Ballast, 1/2Hp).
- Jording: Ensure the timer is plugged into a properly grounded 3-prong outlet.
- Børn: Opbevares utilgængeligt for børn.
- Rensning: Unplug the timer before cleaning. Use a dry cloth; do not use liquid cleaners.
- Reparationer: Forsøg ikke at skille timeren ad eller reparere den. Overlad al service til kvalificeret personale.
3. Nøglefunktioner
- Automatic nightlight that turns ON in the absence of light.
- 48 ON/OFF settings programmable in 30-minute intervals, repeating daily.
- Two (2) grounded outlets for connecting multiple devices.
- Compatible with CFL, LED, and incandescent bulbs.
- Electrical Rating: 125Vac 60Hz, 15A / 1875W Resistive, 8A / 1000W Tungsten, 5A Ballast, 1/2Hp.
4. Opsætning og programmering
This section guides you through setting up and programming your Woods 50021 timer. For a visual demonstration, please refer to the video below.
Video: Demonstration of setting a Woods Indoor Mechanical Timer. This video illustrates how to set the current time, program ON/OFF intervals using the pins, and utilize the manual override switch.
4.1 Indstilling af det aktuelle klokkeslæt
- Sæt timeren i en stikkontakt.
- Rotate the dial clockwise until the current approximate time aligns with the arrow labeled "TIME NOW". PM hours are shaded on the dial for easy identification.
4.2 Programmering af tænd/sluk-tider
The timer dial has segment pins around its circumference. Each segment pin represents 30 minutes.
- Ensure all segment pins are initially pulled UP (OFF position).
- Push the segment pins NED for the period(s) of time you want the connected device to be ON.
- Leave the segment pins UP for the period(s) of time you want the connected device to be SLUKKET.
Billede: Forside view of the Woods 50021 Mechanical Timer, showing the central 24-hour dial with programmable pins and the two grounded outlets on the side.
4.3 Manuel tilsidesættelse
The timer includes a manual override switch located on the top of the unit.
- To permanently turn the connected device ON, slide the switch to the "OUTLET ON" position. This bypasses all programmed settings.
- To revert to the programmed timer settings, slide the switch back to the "TIMER ON" position.
5. Betjening
Once the current time is set and the ON/OFF intervals are programmed, the timer will automatically activate and deactivate connected devices according to your settings. The dial will continuously rotate, indicating the current time and progressing through the programmed cycles.
6. Specifikationer
Billede: Bagside view of the Woods 50021 Mechanical Timer, displaying the electrical rating and manufacturing information.
| Specifikation | Detalje |
|---|---|
| Modelnummer | 50021 |
| Mærke | Woods |
| Farve | Hvid |
| Input bindtage | 125Vac, 60Hz |
| Resistiv vurdering | 15A / 1875W |
| Wolframvurdering | 8A / 1000W |
| Ballast Rating | 5A |
| Motorvurdering | 1/2 hk |
| Antal udsalgssteder | 2 Jordet |
| Programmeringsintervaller | 30 minutes (48 settings per day) |
| Dimensioner | 1 x 1 x 1 tommer (Produkt) |
| Varens vægt | 1.6 ounce |
7. Fejlfinding
- Enheden tænder/slukker ikke:
- Sørg for, at timeren er tilsluttet en stikkontakt med strøm.
- Verify the connected device is functioning correctly when plugged directly into a wall outlet.
- Check that the segment pins are correctly pushed down for ON times and pulled up for OFF times.
- Confirm the manual override switch is in the "TIMER ON" position.
- Ensure the current time on the dial is accurately set.
- Timer dial not rotating:
- Ensure the timer is plugged into a live electrical outlet.
- If the timer is new, it may take a few minutes for the mechanism to start after plugging in.
- Natlyset virker ikke:
- The nightlight activates in low-light conditions. Ensure the surrounding area is dark enough for it to turn on.
8. Garanti og support
For warranty information or technical support, please refer to the product packaging or contact Woods customer service directly. Keep your purchase receipt as proof of purchase.
