ADT Commercial Ice Machine User Manual

Indledning

Thank you for choosing the ADT Commercial Ice Machine, Model HZB-36F. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ice maker. Please read this manual thoroughly before operating the appliance and retain it for future reference.

This commercial ice machine is designed to produce up to 80 lbs of clear ice cubes daily, with a storage capacity of 20 lbs. Its compact design allows for flexible installation as an undercounter or freestanding unit.

Vigtige sikkerhedsoplysninger

Please read all safety warnings and instructions carefully before use to prevent potential hazards and ensure proper operation.

• Sørg for, at apparatet er korrekt jordet.
• Brug ikke ismaskinen med en beskadiget netledning eller stik.
• Hold ventilationsåbninger fri af forhindringer.
• Opbevar ikke eksplosive stoffer såsom spraydåser med et brændbart drivmiddel i dette apparat.
• Dette apparat er beregnet til kommerciel brug.
• Afbryd altid strømforsyningen før rengøring eller vedligeholdelse.
• If your drain outlet height is more than 5.9 inches, a drain pump must be configured. The drain outlet should be no further than 12 inches from the ice machine. Failure to do so may result in water leakage.

Produkt overview

The ADT Commercial Ice Machine HZB-36F features a durable stainless steel exterior and an intuitive LCD control panel for ease of use.

Nøglefunktioner:

• Hurtig isfremstilling: Produces 40 clear ice cubes per cycle in 11-20 minutes, with a daily output of up to 80 lbs. Each cube weighs 9g.
• Fleksibel installation: Dimensions of 14.96"W x 19.29"D x 33.85"H (including 1.18" adjustable feet) allow for undercounter or freestanding placement. Features a front breathing design.
• LCD-skærm: User-friendly control panel for power, delay, cleaning, and ice cube size adjustments.
• Holdbart design: Stainless steel door with a full-length handle and bright blue LED interior lighting.

Opsætning og installation

Proper installation is crucial for the performance and longevity of your ice machine. Please follow these steps carefully.

Udpakning:

1. Fjern forsigtigt alle emballagematerialer.
2. Inspect the ice machine for any shipping damage. Report any damage to your supplier immediately.
3. Ensure all accessories are present: Ice Scoop, In-Line Hose, Drain Hose.

Placeringskrav:

• Place the ice machine on a flat, stable surface.
• Ensure adequate ventilation around the unit. The front breathing design allows for built-in installation, but clearances should still be maintained as per local codes.
• Undgå direkte sollys eller varmekilder.
• The ambient temperature should be between 50°F (10°C) and 90°F (32°C).

Water and Drain Connections:

1. Connect the supplied in-line hose to a potable water supply. Ensure the water pressure is within the recommended range (15-80 PSI).
2. Tilslut afløbsslangen til et passende afløb. Vigtig: If your drain outlet height is more than 5.9 inches, or if the drain outlet is further than 12 inches from the ice machine, a separate drain pump skal be installed. This unit does not include a built-in drain pump.
3. Sørg for, at alle forbindelser er sikre og lækagefri.

Elektrisk tilslutning:

• Plug the ice machine into a dedicated, grounded 115V AC outlet.
• Brug ikke forlængerledninger eller adapterstik.

Betjeningsvejledning

Familiarize yourself with the control panel and basic operations.

Control Panel (Refer to Figure 3):

• Tænd/sluk-knap (tænd/sluk): Tryk for at tænde eller slukke for enheden.
• Timerindstilling: Allows you to set a time for the unit to turn on or off automatically.
• Ice Making Time Adjustment (+/-): Increase or decrease the ice making time to adjust ice cube size. Longer time results in larger cubes.
• Ren funktion: Press and hold the power button for automatic cleaning.

Indledende drift:

1. After connecting water and power, press the Power button to turn on the unit.
2. The ice making process will begin automatically. The first few cycles may produce smaller or irregular ice cubes. This is normal.
3. Allow the unit to run for several hours to stabilize ice production.

Ice Making Reservation:

The unit supports setting a reservation time for ice making, allowing you to schedule when the ice production starts or stops.

Vedligeholdelse og rengøring

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your ice machine.

Daglig vedligeholdelse:

• Tør det udvendige af med en blød, damp klæde.
• Ensure the ice scoop is clean and stored hygienically.

Weekly/Bi-Weekly Cleaning:

• Empty the ice storage bin and clean it with a mild detergent and warm water. Rinse thoroughly.
• Clean the water reservoir and ice making components.

Automatisk rengøringsfunktion:

The ice machine is equipped with an auto-cleaning feature for convenience.

1. Ensure the ice bin is empty.
2. Add a small amount of ice machine cleaner (food-grade) to the water reservoir as per cleaner instructions.
3. Press and hold the "Clean" button (often integrated with the Power button, refer to Figure 3) to activate the auto-cleaning cycle.
4. Once the cycle is complete, drain the cleaning solution and rinse the unit thoroughly with fresh water by running several ice-making cycles and discarding the ice.

Rengøring af kondensator:

Periodically clean the condenser coils to ensure efficient operation. This should be done by a qualified technician or by following specific instructions in a more detailed service manual.

Fejlfinding

Før du kontakter kundeservice, bedes du se følgende tabel for almindelige problemer og løsninger på disse.

Specifikationer

Garanti og kundesupport

For warranty information, please refer to the warranty card included with your product or contact ADT customer support directly. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact ADT customer support. Contact details can typically be found on the manufacturer's webwebstedet eller på produktemballagen.

For the latest information and support, please visit the official ADT webwebstedet eller kontakt deres kundeservicelinje.