Indledning
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your GIGABYTE GA-970A-DS3P AM3+ motherboard. This motherboard features GIGABYTE UEFI Dual BIOS technology, Ultra Durable 4 Classic technology, and supports AMD AM3+ FX/AM3 Phenom II, Athlon II series processors. It includes 2 PCI-E 2.0 x16 interfaces with AMD CrossFire support, 6 native SATA3 ports with up to 6Gbps link speed and RAID 0,1,5,10 support, and 4 USB 3.0 ports with transfer rates of up to 5Gbps. Please read this manual thoroughly before proceeding with installation or operation.
Video 1: En overview of the Gigabyte motherboard, highlighting its features and design. This video provides a general introduction to the product's capabilities and physical layout.
Opsætning og installation
Før installationen påbegyndes, skal du sørge for, at dit system er slukket og taget ud af stikkontakten. Brug en antistatisk håndledsrem for at forhindre skader på komponenterne forårsaget af elektrostatisk udladning (ESD).
1. CPU-installation
This motherboard supports AMD AM3+ FX, AM3 Phenom II, and Athlon II series processors. Carefully open the CPU socket lever, align the CPU with the socket (matching the golden triangle on the CPU to the triangle on the socket), gently place the CPU into the socket, and then close the lever to secure it.
Figur 1: Top-down view of the GIGABYTE GA-970A-DS3P motherboard, highlighting the AM3+ CPU socket in the center.
2. Installation af hukommelse (RAM)
The motherboard features four 1.5V DDR3 DIMM sockets, supporting up to 32 GB of system memory. Compatible speeds include DDR3 2000(O.C), 1866, 1333, and 1066 MHz. Open the clips on both ends of the DIMM slot, align the memory module with the slot key, and press firmly until the clips snap into place.
3. Installation af lagerenhed
Connect your SATA storage devices (HDDs, SSDs) to the 6 native SATA 6Gb/s connectors. These ports support RAID 0, RAID 1, RAID 5, and JBOD configurations. Ensure proper cable connection for both data and power.
4. Installation af udvidelseskort
The motherboard provides 2 PCI Express x16 slots (one running at x16, one at x4), 3 PCI Express x1 slots, and 2 PCI slots. Insert your graphics cards or other expansion cards firmly into the appropriate slots until they are securely seated.
5. Strømforbindelser
Connect the 24-pin ATX main power connector and the 8-pin ATX 12V power connector from your power supply to the corresponding sockets on the motherboard.
6. Bagpaneltilslutninger
Connect your peripherals to the rear I/O panel. This includes USB devices, Ethernet cable, and audio devices.
Figure 2: Rear I/O panel with ports for USB, Ethernet, and audio connections.
7. Internal Headers
Connect front panel USB ports (up to 12 USB 2.0/1.1 ports and 4 USB 3.0/2.0 ports), audio jacks, and system indicators/buttons to the respective headers on the motherboard.
Betjeningsvejledning
After successful installation, power on your system. The GIGABYTE UEFI Dual BIOS provides a user-friendly interface for system configuration. You can access the BIOS setup by pressing the Del nøglen under systemopstart.
- BIOS-opsætning: Configure boot order, system time, and hardware settings.
- UEFI Interface: Navigate using a mouse for easier control.
- GIGABYTE On/Off Charge: Utilize this technology for enhanced USB charging capabilities.
Opretholdelse
Regular maintenance ensures optimal performance and longevity of your motherboard.
- Hold rent: Rengør bundkortet og kølekomponenterne regelmæssigt med trykluft. Sørg for, at systemet er slukket og frakoblet, før rengøring.
- Driver opdateringer: Tjek regelmæssigt GIGABYTE official webwebsted for the latest drivers and BIOS updates to ensure compatibility and performance.
- BIOS Backup: GIGABYTE UEFI Dual BIOS technology provides a backup BIOS. Ensure it is functioning correctly for system stability.
Fejlfinding
Hvis du støder på problemer, kan du se følgende almindelige fejlfindingstrin:
- Ingen strøm: Verify all power cables (24-pin ATX, 8-pin ATX 12V) are securely connected to the motherboard and power supply. Check the power supply unit (PSU) functionality.
- Ingen visning: Ensure the graphics card is correctly seated in its PCI-E slot and connected to the monitor. If using integrated graphics (not applicable for this model without an APU), ensure the monitor is connected to the motherboard's video output.
- Systemustabilitet/nedbrud: Check RAM modules for proper seating. Ensure CPU cooler is correctly installed and making good contact. Update drivers and BIOS.
- Periferiudstyr ikke fundet: Verify USB or SATA device connections. Check device manager for driver issues.
- BIOS-nulstilling: If system fails to boot after BIOS changes, clear CMOS by removing the CMOS battery for a few minutes or using the Clear CMOS jumper (refer to the full manual for exact location).
Specifikationer
| Feature | Detalje |
|---|---|
| CPU support | AMD AM3+ FX processors; AMD AM3 Phenom II processor/ AMD Athlon II processor |
| Chipsæt | AMD 970/SB950 |
| Hukommelse | 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory; DDR3 2000(O.C)/1866/1333/1066 MHz |
| LAN | Realtek GbE LAN chip (10/100/1000 Mbit) |
| Udvidelsesslots | 1 x PCI Express x16 slot, running at x16 (PCIEX16); 1 x PCI Express x16 slot, running at x4 (PCIEX4); 3 x PCI Express x1 slots; 2 x PCI slots |
| Lagergrænseflade | 6 x SATA 6Gb/s connectors; Support for RAID 0, RAID 1, RAID 5, and JBOD |
| USB-porte | Up to 12 USB 2.0/1.1 ports; 4 USB 3.0/2.0 ports |
| Lyd | High Definition Audio |
| Formfaktor | ATX |
Garantioplysninger
This product may be eligible for extended protection plans. For example, a 3-Year Protection Plan is available. Please refer to your purchase documentation or the retailer's website for specific warranty terms and conditions applicable to your region and purchase.
Støtte
For further assistance, technical support, or to download the latest drivers and utilities, please visit the official GIGABYTE webwebsted:
