Produkt overview
This manual provides essential information for the proper installation, operation, and maintenance of your Exmark 87-3290 4 Ply Turf Trac Tire. This genuine Exmark Toro factory part is designed for optimal performance on turf, ensuring minimal impact on lawns while providing reliable traction. It is a direct replacement for previous part number 1-633008 and is compatible with Exmark Front Runner Air Cooled, Lazer Z, and Lazer Z AS models.
Figur 1: Front view of the Exmark 87-3290 4 Ply Turf Trac Tire, showing the non-directional tread pattern and overall structure.
Installationsvejledning
Proper installation is crucial for the safety and performance of your turf trac tire. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and safety procedures. Incorrect installation can lead to tire damage, equipment malfunction, or personal injury.
- Sikkerhed først: Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling tires and wheels.
- Udstyrskompatibilitet: Ensure the tire is compatible with your specific Exmark model (Front Runner Air Cooled, Lazer Z, Lazer Z AS). Refer to your equipment's owner's manual for tire specifications.
- Fælginspektion: Before mounting, inspect the wheel rim for any damage, rust, or deformities that could compromise the tire bead seal.
- Montering: Use proper tire mounting equipment to avoid damaging the tire bead or the rim. Lubricate the tire bead and rim flange with an approved tire mounting lubricant.
- Inflation: Inflate the tire to the recommended pressure specified in your equipment's manual or on the tire's sidewall. Do not exceed the maximum inflation pressure.
Figur 2: Side view of the tire, highlighting the 4-ply construction and non-directional tread designed for turf protection.
Proper Use and Operation
The Exmark 87-3290 Turf Trac Tire is engineered for optimal performance on delicate turf surfaces, minimizing ground disturbance while providing necessary traction for lawn and garden equipment. Adhering to proper usage guidelines will extend the tire's lifespan and ensure efficient operation of your machinery.
- Oprethold korrekt dæktryk: Regularly check and maintain the tire pressure according to the specifications in your equipment's owner's manual. Incorrect pressure can lead to uneven wear, reduced traction, and potential tire failure. The 4-ply rating indicates a robust construction, but proper inflation is still critical.
- Undgå overbelastning: Do not exceed the load capacity specified for the tire and your equipment. Overloading can cause excessive heat buildup, premature wear, and structural damage to the tire.
- Suitable Terrain: These tires are specifically designed for turf applications. While they offer good traction, avoid prolonged use on abrasive surfaces like concrete or asphalt, which can accelerate wear.
- Glat betjening: Avoid sudden starts, stops, or sharp turns, especially on uneven terrain, as this can stress the tire and lead to premature wear or damage.
Figur 3: An Exmark Lazer Z mower equipped with turf trac tires, demonstrating their application in maintaining pristine lawns.
Vedligeholdelse og pleje
Regular maintenance of your Exmark turf trac tire will ensure its longevity and consistent performance. Follow these guidelines to keep your tire in optimal condition:
- Routine Pressure Checks: Check tire pressure weekly, or before each significant use, using an accurate tire pressure gauge. Adjust to the recommended PSI as needed.
- Visuel inspektion: Periodically inspect the tire for signs of wear, cuts, punctures, or embedded foreign objects. Pay close attention to the tread and sidewall areas.
- Slidbanedybde: Monitor tread depth. While turf tires are designed for minimal impact, excessive wear will reduce traction and performance. Replace tires when tread wear becomes significant.
- Rensning: Clean the tires regularly to remove dirt, grass clippings, and debris that can accumulate in the tread grooves. Use mild soap and water.
- Opbevaring: If storing equipment for an extended period, ensure tires are properly inflated and stored in a cool, dry place away from direct sunlight and harsh chemicals.
Fejlfinding af almindelige problemer
This section addresses common issues you might encounter with your turf trac tire and provides basic troubleshooting steps.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Hurtigt eller ujævnt slid på slidbanen | Incorrect tire pressure (under/over-inflation), improper alignment, excessive use on abrasive surfaces, overloading. | Check and adjust tire pressure. Inspect equipment alignment. Limit use on hard surfaces. Ensure load is within limits. |
| Loss of Traction | Under-inflation, worn tread, wet or slippery conditions, incorrect tire type for terrain. | Verify tire pressure. Inspect tread depth and replace if necessary. Exercise caution in wet conditions. |
| Frequent Punctures/Air Loss | Operating in areas with sharp debris, damaged valve stem, rim issues, tire defect. | Inspect tire for embedded objects. Check valve stem. Inspect rim. If persistent, consult a professional for repair or replacement. |
| Tire Bulges or Cracks | Impact damage, manufacturing defect, prolonged exposure to harsh elements, age. | Udskift dækket med det samme. Bulges or cracks indicate structural failure and pose a significant safety risk. |
Tekniske specifikationer
Detailed specifications for the Exmark 87-3290 4 Ply Turf Trac Tire:
| Specifikation | Værdi |
|---|---|
| Mærke | Exmark |
| Modelnummer | 87-3290 |
| Tidligere varenummer | 1-633008 |
| Bedømmelse af lag | 4-lags |
| Slidbanetype | Non-Directional Turf Trac |
| Varedimensioner (L x B x H) | 21 x 21 x 11 tommer |
| Varens vægt | 15.35 pund |
| UPC | 021038648576 |
| Kompatible modeller | Front Runner Air Cooled, Lazer Z, Lazer Z AS |
Garanti og support
As a genuine Exmark factory part, the 87-3290 Turf Trac Tire is manufactured to high standards. For specific warranty information regarding this product, please refer to the official Exmark warranty policy provided with your equipment or visit the official Exmark webwebsted.
For further assistance, technical support, or to locate authorized service centers, please visit the official Exmark brand store or contact Exmark customer service directly. Using genuine Exmark parts ensures compatibility and maintains the integrity of your equipment.
Figur 4: The 'Exmark Original Parts' logo, signifying authenticity and quality.
