KanexPro Adjustable Tilt Wall Mount Instruction Manual

Indledning

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable viewoplevelse.

Sikkerhedsoplysninger

ADVARSEL: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Installer ikke dette produkt på vægge, der ikke er strukturelt solide. Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og skærmen.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• Overskrid ikke den maksimale vægtkapacitet på 75 kg.
• This mount is designed for indoor use only.
• Hold små dele væk fra børn.
• Vær altid mindst to personer til stede ved installationen for at forhindre personskade eller beskadigelse.

Pakkens indhold

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• Vægplademontering
• TV-beslagarme (2)
• Monteringssæt (forskellige skruer, skiver, afstandsstykker, ankre)
• Installationsvejledning (denne vejledning)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

Opsætning og installation

Nødvendige værktøjer (ikke inkluderet): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

Trin 1: Fastgør tv-beslag til tv'et

1. Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
2. Identificer VESA-monteringshullerne på bagsiden af ​​dit tv.
3. Vælg de passende skruer, skiver og afstandsstykker fra hardwaresættet, der passer til dit tv's monteringshuller.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

Trin 2: Monter vægpladen på væggen

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

Trin 3: Hæng tv'et på vægpladen

1. Løft forsigtigt tv'et op med de medfølgende beslag med hjælp.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. Gently lower the TV, ensuring the hooks engage securely with the wall plate.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

Billede: En vinklet view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

Betjening af vippefunktionen

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Loosen these knobs/bolts slightly.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired viewvinkel.
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

Opretholdelse

Regelmæssig vedligeholdelse sikrer vægbeslagets levetid og sikre drift.

• Rensning: Tør holderen af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Periodisk kontrol: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• Skade: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

Fejlfinding

Specifikationer

• Modelnummer: K-WALLM-14-BLK-0847
• Monteringstype: Vægmontering
• Bevægelsestype: Tilt
• Materiale: Legeret stål
• Farve: Black scratch resistant finish
• Maksimal vægtkapacitet: 165 lbs (75 kg)
• Tilt Feature: 0° to -15° Degrees (Variable Downward Tilt)
• Maksimal kompatibel tv-størrelse: 51 tommer
• Kompatible enheder: Television
• Varens vægt: 13 pund (ca. 5.9 kg)

Garanti og support

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

Fabrikant: KanexPro