YSI 251398Y

YSI 251398Y DPD Free Chlorine Reagent Powder User Manual

Model: 251398Y

Produkt overview

The YSI 251398Y DPD Free Chlorine Reagent Powder is designed for accurate measurement of free chlorine in water samples using a compatible colorimeter. Each pack contains 100 individual powder packs, with each pack formulated for a 5ml sample volume and capable of measuring free chlorine in the range of 0 to 3.5 mg/L.

This reagent utilizes the DPD (N,N-Diethyl-p-phenylenediamine) method, which reacts with free chlorine to produce a magenta color, the intensity of which is proportional to the chlorine concentration and measured by a colorimeter.

Sikkerhedsoplysninger

Always handle chemical reagents with care. Read the Safety Data Sheet (SDS) for this product before use. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling the reagent powder. Avoid ingestion and contact with skin or eyes. In case of contact, rinse thoroughly with water and seek medical attention if irritation persists.

Opsætning og forberedelse

Before beginning any measurements, ensure you have the following:

  • YSI 251398Y DPD Free Chlorine Reagent Powder pack
  • Compatible colorimeter or spectrophotometer
  • Rens sample cells/vials
  • Deionized or distilled water for blanks and dilutions (if necessary)
  • Vand sample to be tested
  • Timer

Forberedelsestrin:

  1. Ensure all glassware and sample cells are clean and free from contamination. Rinse with deionized water before use.
  2. Calibrate your colorimeter according to its specific instruction manual before use.

Betjeningsvejledning

Follow these steps to accurately measure free chlorine using the YSI 251398Y DPD Free Chlorine Reagent Powder:

  1. Sample samling: Collect a fresh water sample in a clean sample cell. The required volume is 5ml. Ensure the sample is representative of the water being tested.
  2. Add Reagent: Carefully tear open one YSI 251398Y DPD Free Chlorine Reagent Powder pack. Add the entire contents of the powder pack to the 5ml water sample i sample celle.
  3. Blande: Sæt låg på sample cell and invert several times to thoroughly mix the reagent with the sample. Ensure all powder dissolves completely. A magenta color will develop if free chlorine is present.
  4. Reaktionstid: Allow a reaction time of 1 minute for the color to fully develop. Do not exceed 6 minutes, as color fading may occur, leading to inaccurate results.
  5. Måling: Indsæt den forberedte sample cell into your calibrated colorimeter. Follow your colorimeter's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  6. Rekordresultater: Record the measured free chlorine concentration.
Close-up of a silver foil reagent powder packet with 'VARIO.LIT Chlorine FREE-DPD' printed on it.

Image: A single YSI DPD Free Chlorine Reagent Powder packet. This silver foil packet contains the pre-measured reagent powder for a single test. The text "VARIO.LIT Chlorine FREE-DPD" is visible on the packet, indicating its contents and purpose.

Vedligeholdelse og opbevaring

Proper storage and handling are crucial for maintaining the integrity and effectiveness of the reagent powder:

  • Opbevaring: Store the reagent powder packs in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store near strong acids or bases.
  • Holdbarhed: Refer to the expiration date printed on the packaging. Do not use expired reagents, as they may yield inaccurate results.
  • Bortskaffelse: Dispose of used reagent and sample solutions according to local environmental regulations. Consult your local authorities for proper chemical waste disposal procedures.
  • Renhed: Always ensure sample cells and equipment are thoroughly cleaned after each use to prevent cross-contamination.

Fejlfinding

If you encounter issues during testing, consider the following common problems and solutions:

ProblemMulig årsagLøsning
No color developmentNo free chlorine present; Expired reagent; Incorrect sampvolumen.Bekræft sample contains chlorine; Check reagent expiration date; Ensure 5ml sampvolumen.
Fading color or inaccurate readingReaction time exceeded; Contaminated sample cell; Turbidity in sample.Adhere strictly to 1-minute reaction time; Clean sample cells thoroughly; Filter turbid samples om nødvendigt.
Inconsistent resultsImproper mixing; Temperature variations; Colorimeter not calibrated.Ensure complete dissolution of powder; Perform tests at consistent temperatures; Recalibrate colorimeter.

Specifikationer

  • Produktnavn: YSI DPD Free Chlorine Reagent Powder
  • Modelnummer: 251398Y
  • Reagent Type: DPD (N,N-Diethyl-p-phenylenediamine)
  • Analyte: Frit klor (Cl2)
  • Sampvolumen: 5 ml
  • Måleområde: 0 til 3.5 mg/L (ppm)
  • Emballage: Powder packs, 100 per pack
  • Fabrikant: YSI
  • ASIN: B00CMX0PDK
  • Pakkedimensioner: 8.1 x 6.9 x 1.2 tommer
  • Varens vægt: 3.2 ounce

Garanti og support

For information regarding product warranty, technical support, or to purchase additional reagents, please contact YSI customer service or visit the official YSI website. Refer to your purchase documentation for specific warranty terms and conditions.

YSI Contact Information:

  • Webwebsted: www.ysi.com (Please note: This is a placeholder link, refer to official YSI documentation for exact contact details.)

Relaterede dokumenter - 251398Y

Preview YSI Model 32 Konduktansmåler Brugsanvisning
Instruktionsmanual til YSI Model 32 konduktansmåler med detaljer om dens generelle beskrivelse, specifikationer, driftsprocedurer, vedligeholdelse og kalibrering.
Preview YSI Pro20/Pro20i Quick Start Guide: Calibration and Operation
Concise guide for calibrating and operating the YSI Pro20/Pro20i dissolved oxygen meters, covering membrane installation, sensor setup, barometer and DO calibration, salinity compensation, and measurement taking. Includes essential operational steps and contact information.
Preview YSI 3821 Buffer Solution pH 4.00 Safety Data Sheet (SDS)
Comprehensive Safety Data Sheet (SDS) for YSI 3821 Buffer Solution pH 4.00, detailing product identification, hazards, composition, first aid, handling, storage, and regulatory information.
Preview YSI EcoSense DO200A/DO200M Dissolved Oxygen and Temperature Instruments User Manual
This user manual provides comprehensive instructions for operating, installing, maintaining, and troubleshooting the YSI EcoSense DO200A and DO200M dissolved oxygen and temperature instruments. It includes details on specifications, accessories, and warranty information.
Preview YSIT-1 satellittransmitterens drifts- og vedligeholdelsesmanual
Omfattende brugermanual til YSI Model YSIT-1 satellitsenderen, der dækker dens betjening, vedligeholdelse, hardwareopsætning og seriel kommandoreference. Detaljer omfatter tidsstyring, datalagring, GOES-dataformatering, RF-senderstyring og GPS-synkronisering.
Preview YSI IQ Sensor Net MIQ/CHV PLUS Operating Manual
This operating manual provides detailed instructions for the YSI IQ Sensor Net MIQ/CHV PLUS valve module, covering installation, settings, maintenance, and safety guidelines for compressed air-operated sensor cleaning heads.