Mount-It! MI-781 Dual Monitor Stand Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Mount-It! MI-781 Dual Monitor Stand. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use will ensure optimal performance and safety.

2. Sikkerhedsoplysninger

ADVARSEL: Failure to read and follow all instructions, warnings, and cautions in this manual may result in personal injury or property damage.

• Do not exceed the maximum weight capacity of 22 lbs (10 kg) per monitor.
• Ensure the mounting surface can safely support the combined weight of the stand and monitors.
• Use only the hardware provided. Do not use damaged or missing parts.
• This product contains small items that could be a choking hazard. Keep away from children.
• Always have two people assist with monitor installation to prevent injury or damage.
• Periodically check that the stand is secure and all fasteners are tight.

3. Pakkens indhold

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or defective, contact Mount-It! customer support.

• Main Pole with Base
• Horizontal Arm Assembly
• VESA Monitor Plates (2)
• Freestanding Base (pre-attached to pole)
• Grommet Base Option
• Monteringssæt (skruer, skiver, afstandsstykker)
• Tools (Allen wrenches, combo hex wrench)
• Kabelhåndteringsklip

Figure 1: All components of the Mount-It! MI-781 Dual Monitor Stand, including the main pole, horizontal arm, VESA plates, and interchangeable bases.

4. Opsætning og installation

4.1 Choose Your Base Option

The MI-781 stand offers two installation methods: a freestanding weighted base or a grommet base for secure desk mounting.

Figure 2: The freestanding base provides stability on the desktop, while the grommet base offers a more permanent, space-saving installation through a desk hole.

4.2 Freestanding Base Installation (Default)

1. Assemble the Pole and Base: The main pole is typically pre-attached to the freestanding base. Ensure the connection is secure.
2. Attach Horizontal Arm: Slide the horizontal arm assembly onto the main pole at your desired initial height. Tighten the locking screw to secure it.
3. Fastgør VESA-plader til skærme: Secure the VESA monitor plates to the back of your monitors using the appropriate screws from the hardware kit. Ensure the VESA pattern (75x75mm or 100x100mm) matches your monitors.
4. Monter skærme: Carefully slide the monitors (with VESA plates attached) onto the ends of the horizontal arm. Secure them with the provided screws or quick-release mechanisms. Assistance from a second person is recommended for this step.

Figure 3: The dual monitor stand fully assembled with two monitors, demonstrating the freestanding base option.

4.3 Grommet Base Installation (Optional)

If you prefer a more permanent and space-saving installation, use the grommet base option.

1. Remove Freestanding Base: Detach the freestanding base from the main pole if it is already assembled.
2. Prepare Desk Hole: Ensure your desk has a suitable grommet hole (typically 0.4" to 2.4" in diameter). If not, a hole may need to be drilled.
3. Install Grommet Base: Insert the grommet base bolt through the desk hole. Secure it from underneath the desk using the provided washer and nut. Tighten firmly.
4. Attach Main Pole: Secure the main pole to the grommet base.
5. Attach Horizontal Arm and Monitors: Follow steps 2-4 from the Freestanding Base Installation section.

Figure 4: An office environment illustrating the use of both the weighted freestanding base and the grommet base for monitor stand installations.

4.4 Kabelstyring

Utilize the integrated cable management clips on the horizontal arms to route and organize your monitor cables. This helps maintain a tidy workspace.

Figure 5: This diagram highlights key features including height-adjustable arms, integrated cable management clips, tiltable VESA plates, and the interchangeable freestanding or grommet base options.

5. Betjening og justeringer

The Mount-It! MI-781 Dual Monitor Stand offers various adjustments for ergonomic positioning of your screens.

5.1 Højdejustering

To adjust the height of the monitors, loosen the locking screw on the main pole, slide the horizontal arm assembly up or down to the desired position, and then re-tighten the screw firmly.

5.2 Hældning, drejning og rotation

Each monitor arm allows for independent adjustment:

• Vip: Monitors can tilt up and down by +/- 90 degrees. Adjust the tilt angle by loosening the tilt mechanism on the VESA plate, setting the desired angle, and re-tightening.
• Drejelig: Monitors can swivel left and right by +/- 90 degrees at the arm joint.
• Rotation: Each screen can be rotated 180 degrees (portrait to landscape and vice-versa) independently.

Figure 6: This illustration demonstrates the extensive adjustability of the monitor arms, including +/-90 degrees tilt, +/-90 degrees swivel, and 180 degrees rotation for both portrait and landscape orientations.

5.3 Justering af spænding

If monitors sag or are too stiff to move, adjust the tension at the pivot points using the provided Allen wrenches. Remove any plastic caps to access adjustment bolts if necessary. Tighten for more resistance, loosen for less.

6. Vedligeholdelse

• Rensning: Tør stativet af med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Periodiske kontroller: Regularly inspect all screws and connections to ensure they remain tight and secure. Re-tighten as needed.
• Smøring: No lubrication is typically required for the moving parts. If movement becomes excessively stiff, ensure no debris is obstructing the joints.

7. Fejlfinding

7.1 Monitors Sagging or Not Holding Position

• Check Weight Capacity: Ensure each monitor does not exceed the 22 lbs (10 kg) weight limit.
• Juster spænding: Tighten the tension bolts at the arm joints and VESA plate tilt mechanism using the provided tools. Refer to section 5.3.

7.2 Stand is Unstable

• Freestanding Base: Ensure the base is placed on a flat, stable surface and is not overhanging the edge of the desk.
• Grommet Base: Verify the grommet bolt is securely tightened to the desk.
• Monitorplacering: Ensure monitors are balanced on the arms.

7.3 Cables Not Fitting in Clips

• Ensure cables are routed individually or in small bundles. Avoid forcing too many cables into one clip.
• Consider using additional cable ties if the integrated clips are insufficient for your cable volume.

8. Specifikationer

Figure 7: Detailed dimensions of the stand and supported VESA mounting patterns (75x75mm and 100x100mm).

Figure 8: Visual representation of the stand's compatibility with screen sizes up to 24 inches.

9. Garanti

The Mount-It! MI-781 Dual Monitor Stand comes with a 5 ÅRS GARANTIDenne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.

10. Kundesupport

For any questions, assistance with assembly, or troubleshooting, please contact our friendly and responsive US-based customer support team during normal business hours.

Kontaktoplysninger: Refer to the Mount-It! official webwebstedet eller produktemballagen for de mest aktuelle kontaktoplysninger.