Unitech MS840 Rugged Handheld Laser Scanner
Model: MS840-SUBBGC-SG
1. Introduktion
The Unitech MS840 is a high-performance, rugged handheld laser scanner designed for demanding environments. It offers reliable and accurate barcode scanning capabilities, making it ideal for various applications including retail, logistics, and inventory management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MS840 scanner.
Image 1.1: The Unitech MS840 Rugged Handheld Laser Scanner. This image shows the dark blue and light blue scanner from a slight angle, highlighting its ergonomic design and the laser scanning window at the front.
2. Sikkerhedsoplysninger
Please read all safety instructions carefully before using the Unitech MS840 scanner to prevent injury or damage to the device.
- Lasersikkerhed: This device uses a Class 1 laser. Do not stare directly into the laser beam or point it at others.
- Elektrisk sikkerhed: Use only the provided USB cable. Do not expose the device to water or extreme temperatures.
- Håndtering: The MS840 is rugged, but avoid dropping it from excessive heights or subjecting it to severe impacts.
- Bortskaffelse: Dispose of the device and its components according to local environmental regulations.
3. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- Unitech MS840 Handheld Laser Scanner
- USB -tilslutningskabel
- Hurtigstartguide (hvis relevant)
4. Opsætning
Follow these steps to set up your Unitech MS840 scanner:
- Tilslut USB-kablet:
Insert the smaller end of the USB cable into the port at the base of the MS840 scanner. Connect the larger end of the USB cable to an available USB port on your computer (Laptop or Desktop).
- Driver installation:
The MS840 is typically a plug-and-play device and should be recognized automatically by most operating systems. If prompted, allow your system to install the necessary drivers. No additional software installation is usually required for basic operation.
- Indledende test:
Open a text editor or a program where you can input text (e.g., Notepad, Word). Scan a known barcode. If the setup is successful, the barcode data should appear in the opened application.
5. Betjening af scanneren
The Unitech MS840 is designed for simple and efficient barcode scanning.
- Tænd: The scanner powers on automatically when connected to a powered USB port.
- Sigter: Hold the scanner with the scanning window facing the barcode. Press the trigger button located on the handle. A red laser line will project from the scanning window.
- Scanning: Position the laser line across the entire barcode. Ensure the barcode is flat and well-lit.
- Successful Scan Indication: Upon a successful read, the scanner will typically emit an audible beep and/or an LED indicator will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- Understøttede stregkoder: The MS840 is a laser scanner, primarily designed for 1D (linear) barcodes.
6. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your MS840 scanner.
- Rengøring af scanningsvinduet:
Rengør regelmæssigt scanningsvinduet med en blød, fnugfri klud. Tør genstridigt snavs let af.ampen the cloth with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials.
- Generel rengøring:
Wipe the exterior of the scanner with a soft, damp klud. Undgå at fugt kommer ind i åbningerne.
- Kabelpleje:
Avoid bending or twisting the USB cable excessively. Store the cable neatly when not in use to prevent damage.
- Opbevaring:
Store the scanner in a clean, dry environment away from direct sunlight and extreme temperatures when not in use.
7. Fejlfinding
If you encounter issues with your MS840 scanner, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Scanneren tænder ikke. | USB-kablet er ikke korrekt tilsluttet, eller USB-porten er defekt. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port on your computer. |
| Scanneren læser ikke stregkoder. | Barcode damaged, poor lighting, incorrect aiming, or unsupported barcode type. | Ensure the barcode is clear and undamaged. Provide adequate lighting. Aim the laser line directly across the barcode. Verify it's a 1D barcode. Clean the scanning window. |
| Scanned data not appearing on screen. | Application not in focus, incorrect keyboard layout, or driver issue. | Click into the text field of the application where you want the data to appear. Restart the application or computer. Check device manager for driver status. |
| Scanneren bipper, men ingen data. | Data transmission issue or application not ready. | Ensure the cursor is active in the target application. Try scanning into a simple text editor like Notepad to isolate the issue. |
If the problem persists after trying these solutions, please contact Unitech customer support.
8. Specifikationer
Detailed technical specifications for the Unitech MS840 scanner:
| Feature | Beskrivelse |
|---|---|
| Mærke | Unitech |
| Model | MS840-SUBBGC-SG |
| Scanner type | Hand-held Laser Scanner |
| Scanningselementtype | Laser |
| Scan Speed / Rate | 100 scans/second (100 fps) |
| Forbindelsesteknologi | Kabel (USB) |
| Interface Type | USB |
| Kompatible enheder | Bærbar computer, skrivebord |
| Produktmål (LxBxH) | 2.54 x 2.54 x 2.54 cm (25 x 25 x 25 millimeter) |
| Varens vægt | 454 g (453.59 g) |
| Batterier påkrævet | Ingen |
| ASIN | B00C4OGY2I |
| Global Trade Identification Number (GTIN) | 00132017875439 |
| Første ledige dato | 30. april 2013 |
9. Garanti og support
Unitech products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech webwebsted.
For technical support, service, or further inquiries, please contact Unitech customer service through their official channels. Have your model number (MS840-SUBBGC-SG) and ASIN (B00C4OGY2I) ready when contacting support.
Note: Contact information for Unitech can typically be found on their official webwebsted eller i produktemballagen.
