Mayer Swivel Chair User Manual

1. Introduktion

Thank you for choosing the Mayer Swivel Chair. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new office chair. Please read this manual carefully before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.

2. Sikkerhedsoplysninger

• Sørg for, at alle komponenter er forsvarligt fastgjort før brug.
• Stå ikke på stolen.
• Brug ikke stolen, hvis nogen af ​​delene er beskadigede eller mangler.
• Maximum recommended load capacity is 110 kg. Do not exceed this weight.
• Keep children away from the chair during assembly. Small parts may be a choking hazard.
• Brug stolen på en plan overflade for at forhindre den i at vælte.

3. Pakkens indhold

Kontroller venligst, at alle dele er til stede, før monteringen påbegyndes. Hvis der mangler eller er beskadigede dele, skal du kontakte kundesupport.

• Seat cushion (1)
• Backrest with mesh (1)
• Nakkestøtte (1)
• Armlæn (2)
• Star base (1)
• Hjul (5)
• Gas lift cylinder (1)
• Mechanism plate (1)
• Hardware pack (screws, washers, Allen key)

4. Monteringsvejledning

Assembly is required for this product. Follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

1. Fastgør hjul til basen: Sæt de fem hjul ind i hullerne for enden af ​​hvert ben på stjernebasen. Tryk godt til, indtil de klikker på plads.
2. Indsæt gasløft: Placer gasløftecylinderen i det midterste hul på den samlede stjernebase.
3. Fastgør mekanismen til sædet: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and Allen key. Ensure the front of the mechanism faces the front of the seat.
4. Fastgør armlæn: Secure the armrests to the sides of the seat cushion using the provided screws. Do not overtighten initially.
5. Fastgør ryglæn: Connect the backrest to the mechanism plate or seat frame using the designated screws. Adjust the armrests if necessary to align with the backrest attachment points, then tighten all armrest screws.
6. Fastgør nakkestøtten: Slide the headrest into the slot at the top of the backrest. Adjust its height and inclination as desired.
7. Tilslut sæde til gaslift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is centered. Apply downward pressure to secure it.

Figure 4.1: Fully assembled Mayer Swivel Chair, showcasing its ergonomic design and components.

5. Betjeningsvejledning (Justeringer)

Your Mayer Swivel Chair offers several adjustment options to customize your seating experience for optimal comfort and support.

• Sædehøjdejustering: Locate the lever on the right side beneath the seat. Pull the lever up to raise the seat. To lower, pull the lever up while seated. Release the lever at the desired height. The seat height range is approximately 47-56 cm.
• Backrest Tilt and Lock: The chair features a synchronous mechanism. Use the lever on the left side beneath the seat to adjust the backrest tilt. Pull the lever out to allow the backrest to recline freely. Push the lever in to lock the backrest in an upright or reclined position.
• Individual Weight Adjustment: A knob located beneath the seat (usually at the front or center) allows you to adjust the tension of the backrest tilt. Turn clockwise to increase tension (for heavier users) and counter-clockwise to decrease tension (for lighter users).
• Sædedybdejustering: Some models feature a seat depth adjustment. Look for a lever or button on the side of the seat. Activate it to slide the seat forward or backward, then release to lock.
• Justering af armlæn: The armrests are height and depth adjustable. Locate the buttons or levers on the armrests. Press or lift to adjust the height, and slide the armrest pad forward or backward for depth adjustment. Release to lock.
• Nakkestøttejustering: The headrest can be adjusted for both height and inclination. Gently pull or push the headrest to move it up or down, and tilt it to find your preferred angle.
• Justering af lændestøtte: The chair includes height-adjustable lumbar support. Locate the mechanism on the backrest and slide it up or down to position the support correctly for your lower back.

6. Vedligeholdelse og pleje

Proper care will extend the life and appearance of your Mayer Swivel Chair.

• Rensning: Tør af med annonceamp cloth. For stubborn stains on fabric, use a mild upholstery cleaner according to its instructions. Avoid harsh chemicals or abrasive cleaners.
• Inspektion: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Efterspænd om nødvendigt.
• Hjul: Hold hjulene fri for hår og snavs for at sikre jævn rulning.
• Undgå direkte sollys: Prolonged exposure to direct sunlight can cause fading of fabric and plastic components.

7. Fejlfinding

8. Specifikationer

• Model: Swivel Chair B00C193C8U
• Mærke: Mayer
• Materiale: Plastic (back), Fabric (seat), Aluminum (frame/base)
• Farve: Sort
• Varens vægt: 35 kg
• Maksimal anbefalet belastning: 110 kg
• Sædehøjde: 47-56 cm
• Funktioner: Adjustable Height, Rolling, Adjustable Headrest, Adjustable Lumbar Support, Swivel Armrests, Synchronous Mechanism
• Montering påkrævet: Ja
• Vedligeholdelsesinstruktioner: Tør Clean

9. Garanti og support

For garantioplysninger eller teknisk support, kontakt venligst din forhandler eller producenten direkte. Gem din købskvittering som købsbevis.

Manufacturer: Mayer