Promag PCR-330M USB RFID-læser brugermanual

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Promag PCR-330M USB RFID Reader. The PCR-330M is a 13.56 MHz (MIFARE) keyboard-mode RFID reader designed for various applications requiring efficient and reliable card reading. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Figur 1: Promag PCR-330M USB RFID Reader. This image shows the top view of the white Promag PCR-330M RFID reader. It features a prominent oval-shaped blue button in the center, flanked by two small indicator lights (one grey, one green). A white USB cable extends from the top edge of the device. The "PROMAG" logo is subtly embossed near the top. The device has a sleek, slightly curved design with blue accents on its sides.

Opsætning

Follow these steps to set up your Promag PCR-330M RFID Reader:

1. Pak enheden ud: Carefully remove the PCR-330M reader from its packaging. Ensure all components are present.
2. Tilslut til computer: Plug the USB cable of the PCR-330M into an available USB port on your computer. The device is plug-and-play and typically does not require additional driver installation for standard keyboard-mode operation.
3. Tænd: The device will draw power directly from the USB port. The indicator lights on the reader will illuminate briefly upon successful connection.
4. Test funktionalitet: Open a text editor (e.g., Notepad, Word) or any application where text input is possible. Place a compatible 13.56 MHz RFID card (e.g., MIFARE) near or on the reader's sensing area. The card's ID should appear as typed text in the open application.

Betjeningsvejledning

The Promag PCR-330M operates in keyboard emulation mode, meaning it sends card data as if it were typed on a keyboard.

• Kortplacering: Position the RFID card directly on the reader's surface or within close proximity (typically 0-5 cm) for optimal reading.
• Dataoutput: Once a card is read, its unique identifier (UID) or programmed data will be outputted to the active cursor position in any open application.
• Indikatorlys:
  • Grøn LED: Indicates successful card reading.
  • Grey LED: Indicates power or standby status.
• Multiple Reads: To read the same card again, remove it from the sensing area and then place it back.

Opretholdelse

To ensure the longevity and optimal performance of your PCR-330M reader, follow these maintenance guidelines:

• Rensning: Use a soft, dry, lint-free cloth to clean the exterior of the device. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface.
• Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Håndtering: Undgå at tabe enheden eller udsætte den for hårde stød. Forsøg ikke at åbne låget.asing, da dette vil ugyldiggøre garantien.

Fejlfinding

If you encounter issues with your Promag PCR-330M, refer to the following common problems and solutions:

Hvis problemet fortsætter efter at have prøvet disse løsninger, bedes du kontakte kundesupport.

Specifikationer

Garantioplysninger

Promag products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official Promag webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

Kundesupport

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Promag customer support.

• Fabrikant: Promag
• Webwebsted: www.promag.com.tw (Note: This is a general placeholder for a manufacturer's website. Please refer to your product packaging for the most accurate support contact information.)
• E-mail/Telefon: Henvis til embedsmanden website or product documentation for specific contact details.