Kendal Lighting AC18250-WH

Kendal Lighting AC18250-WH Novo loftsventilator brugsanvisning

Model: AC18250-WH | Brand: Kendal Lighting

Produkt overview

The Kendal Lighting AC18250-WH The Novo Ceiling Fan is designed to provide efficient air circulation and integrated lighting for your living space. This model features a white finish, four white blades with a 50-inch span, and an integrated 3-tier light kit. It comes with a full-function remote control for convenient operation.

Kendal Lighting AC18250-WH The Novo Ceiling Fan in white

Image: The Novo Ceiling Fan, showcasing its white finish, four blades, and integrated light kit.

Opsætning og installation

Korrekt installation er afgørende for sikker og effektiv drift af din loftsventilator. Det anbefales, at installationen udføres af en kvalificeret elektriker.

Komponenter Tjekliste:

Installationstrin (generelt):

  1. Sikkerhed først: Sørg for, at strømmen er afbrudt ved afbryderen, før installationen påbegyndes.
  2. Monteringsbeslag: Securely attach the mounting bracket to a ceiling joist or an approved fan brace.
  3. Ledningsføring: Connect the fan's electrical wires to the household wiring according to local electrical codes. Ensure the remote receiver is properly wired.
  4. Saml ventilatoren: Fastgør ventilatormotoren til monteringsbeslaget.
  5. Installer klinger: Securely attach the four fan blades to the motor housing.
  6. Installer lyssæt: Connect and secure the integrated 3-tier light kit to the fan motor assembly. Install the provided G9 light bulbs.
  7. Prøve: Genopret strømmen, og test ventilator- og lysfunktionerne med fjernbetjeningen.

Betjeningsvejledning

Your Novo Ceiling Fan comes with a full-function remote control for convenient operation of both the fan and the integrated light kit.

Fjernbetjeningsfunktioner:

Sørg for, at fjernbetjeningen har nye batterier for optimal ydeevne.

Opretholdelse

Regelmæssig vedligeholdelse er med til at sikre din loftsventilators levetid og optimale ydeevne.

Rensning:

Udskiftning af pære:

The integrated light kit uses G9 75w T4 120v Halogen bulbs. When replacing, ensure the power is off at the circuit breaker and allow the bulb to cool before handling.

  1. Turn off power to the fan at the circuit breaker.
  2. Carefully remove the old G9 bulb from its socket.
  3. Insert the new G9 bulb firmly into the socket.
  4. Gendan strømmen og test lyset.

Fejlfinding

If you experience issues with your Novo Ceiling Fan, refer to the following common troubleshooting steps:

ProblemMulig årsagLøsning
Ventilatoren fungerer ikke.No power; loose wiring; remote control issues.Check circuit breaker. Verify all wire connections. Replace remote batteries. Ensure remote receiver is properly installed.
Lyset tændes ikke.Burned out bulb; loose wiring; light switch off.Replace G9 bulb. Check light kit wiring. Ensure light function on remote is activated.
Ventilator vakler.Loose blades; unbalanced blades; improper mounting.Ensure all blade screws are tight. Use a balancing kit (not included) if necessary. Verify mounting bracket is secure.
Fjernbetjening virker ikke.Løbte batterier; fjernbetjening ikke parret.Replace batteries. Refer to remote pairing instructions (if applicable, usually in a separate remote manual).

Specifikationer

FeatureDetalje
ModelnummerAC18250-WH
MærkeKendal Lighting
SlutteHvid
Fan Blade ColorHvid
Antal blade4
Klingespænd50 tommer
Knivhøjde14 grader
LyssætIntegrated 3-tier light kit
Type pære(1) 75w T4 G9 120v Halogen (bulb included with 1 extra)
Motorstørrelse153 x 22 mm
KontroltypeFuld funktion fjernbetjening
Voltage120 volt

Garantioplysninger

Kendal Lighting products are manufactured to high-quality standards. This product is covered by the manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Kendal Lighting webwebstedet for detaljerede garantivilkår og -betingelser. Gem din købsbevis til garantikrav.

Kundesupport

For technical assistance, replacement parts, or any questions regarding your Kendal Lighting AC18250-WH The Novo Ceiling Fan, please contact Kendal Lighting customer support. Contact information can typically be found on the manufacturer's webstedet eller i emballagematerialerne.

Note: Always ensure power is disconnected before performing any maintenance or troubleshooting steps.

Relaterede dokumenter - AC18250-WH

Preview Kendal AC-31360 loftsventilator installations- og betjeningsmanual
Omfattende vejledning til installation, betjening og vedligeholdelse af Kendal AC-31360 loftsventilatoren, inklusive sikkerhedsforanstaltninger, fejlfinding og fjernbetjeningsfunktioner.
Preview Installationsvejledning til Kendal AC31924-BLK loftsventilator
Omfattende installations-, betjenings- og vedligeholdelsesvejledning til Kendal AC31924-BLK loftsventilatoren, inklusive sikkerhedsforanstaltninger og tips til fejlfinding.
Preview Kendal Lighting PF269-3L: Installationsvejledning og produktoversigtview
Detaljeret installationsvejledning og sikkerhedsinstruktioner til Kendal Lighting PF269-3L loftlampe. Lær om dens 3CCT-valgbare funktion og lysdæmperkompatibilitet.
Preview Kendal Lighting PF271-8LPA installationsvejledning
Omfattende installationsvejledning til Kendal Lighting PF271-8LPA-armaturet, inklusive sikkerhedsinstruktioner, stykliste og trinvise monteringsvejledninger.
Preview Kendal Lighting TA014-36-ORB Installations- og monteringsvejledning
Detaljerede instruktioner og delediagram til samling og installation af Kendal Lighting TA014-36-ORB lysarmaturet, inklusive montering på en stikdåse eller skinne.
Preview Kendal Lighting AC-30842 & AC-30852 Loftventilator Installations- og betjeningsmanual
This manual provides detailed instructions for installing, operating, and maintaining Kendal Lighting AC-30842 and AC-30852 ceiling fans. It includes safety warnings, assembly steps, wiring diagrams, remote control usage, troubleshooting tips, and care instructions.