Indledning
This manual provides comprehensive instructions for the VTech VTCS6629-3 DECT 6.0 3-Handset Expandable Cordless Phone System. This system is designed to offer clear communication and convenient features for your home or office. Please read this manual thoroughly to ensure proper setup and operation of your new phone system.
Nøglefunktioner:
- DECT 6.0 Digital Technology for enhanced security and clarity
- Three-Handset System for extended coverage
- Digital Answering System with message counter
- Caller ID/Call Waiting capability
- Backlit Keypad and Display for easy viewing
- Full-Duplex Handset Speakerphone
- Expandable up to 5 handsets (additional handsets sold separately)
- Intercom between handsets
Hvad er der i æsken
Bekræft, at din pakke indeholder følgende varer:
- Main Base Unit with Digital Answering System
- Trådløse håndsæt (3)
- Charging Cradles (2) for additional handsets
- AC Adapters (3) for base unit and charging cradles
- Telefonledning
- Rechargeable Ni-MH Batteries (3)
- Brugermanual (dette dokument)
Opsætning
1. Tilslutning af baseenheden
- Plug one end of the telephone line cord into the TEL LINE jack on the back of the base unit.
- Sæt den anden ende af telefonledningen i et telefonstik i væggen.
- Plug one of the AC adapters into the POWER jack on the back of the base unit.
- Plug the other end of the AC adapter into a wall outlet not controlled by a wall switch.
2. Batteriinstallation
Each handset requires a rechargeable Ni-MH battery. Follow these steps for each handset:
- Åbn batterirummets dæksel på bagsiden af håndsættet.
- Connect the battery pack plug securely into the jack inside the battery compartment.
- Place the battery pack with the label UP into the battery compartment.
- Luk batterirummets dæksel.
3. Opladning af håndsættene
Once the batteries are installed, place each handset in the main base unit or one of the charging cradles to charge. The CHARGE light on the handset will illuminate, indicating it is charging. Allow at least 10 hours for the batteries to fully charge before initial use.
Operating Your Phone System
Foretage og modtage opkald
- To make a call: Press TALK / FLASH or HØJTTALER, og ring derefter op til nummeret.
- To receive a call: Press TALK / FLASH or HØJTTALER når telefonen ringer.
- Sådan afsluttes et opkald: Tryk på FRA/ANNULLER.
Using the Digital Answering System
The main base unit features a digital answering system to record incoming messages. The message counter on the base unit displays the number of new messages.
- To turn the answering system ON/OFF: Press the SVAR TIL/FRA knappen på baseenheden.
- To play messages: Press SPIL/STOP på basisenheden.
- To delete messages: Press SLET under afspilning af beskeder.
Vis nummer og opkald venter
The phone displays the caller's name and number (if available) before you answer. If you subscribe to Call Waiting service, the phone will alert you to a new incoming call while you are on another call.
- Til review Caller ID history: Press CID på håndsættet.
- To answer a waiting call: Press BLITZ.
Intercom Between Handsets
You can use the intercom feature to communicate between two handsets within the system.
- To initiate an intercom call: Press INT on a handset, then dial the number of the destination handset (e.g., 1, 2, or 3).
- To end an intercom call: Press FRA/ANNULLER.
Højttalertelefon funktion
Each handset is equipped with a full-duplex speakerphone, allowing for hands-free conversations.
- To activate speakerphone during a call: Press HØJTTALER.
- To switch back to handset mode: Press TALK / FLASH.
Backlit Keypad and Display
The handsets feature a backlit keypad and display, making it easier to dial and view information in low-light conditions.
Opretholdelse
- Rensning: Clean the phone and handsets with a soft, damp cloth. Do not use cleaning agents or abrasive powders.
- Batteripleje: To maintain optimal battery performance, fully charge the handsets for 10 hours before initial use. If the phone will not be used for an extended period, remove the batteries.
- Undgå vand: Do not expose the phone system to water or moisture.
Fejlfinding
If you experience issues with your phone system, try the following common solutions:
| Problem | Løsning |
|---|---|
| Ingen klartone | Ensure the telephone line cord is securely plugged into both the base unit and the wall jack. Check if the AC adapter is properly connected. |
| Håndsættet oplades ikke | Make sure the handset is correctly placed in the base unit or charging cradle. Verify the AC adapter for the charging unit is plugged into a working outlet. Clean the charging contacts on the handset and charger. |
| Dårlig lydkvalitet | Move closer to the base unit. Ensure there are no large metal objects or other electronic devices interfering with the signal. Check your telephone line connection. |
| Answering system not recording | Sørg for, at telefonsvareren er tændt. Kontroller, om hukommelsen er fuld; slet gamle beskeder, hvis det er nødvendigt. |
| Handset displays "Out of range" | Move the handset closer to the base unit. Ensure the base unit is powered on. |
Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 5.2 x 6.7 x 6.9 tommer |
| Varens vægt | 1.5 pund |
| Modelnummer | CS66293 |
| Batterier | 1 AAA batteries required (included) per handset |
| Telefontype | Trådløs |
| Type svarsystem | Digital |
| Farve | Sølv |
| Fabrikant | VTech |
| Dato først tilgængelig | 7. marts 2013 |
Garanti og support
For warranty information and technical support, please refer to the documentation included with your product or visit the official VTech webwebstedet. Behold din købskvittering som købsbevis.
Sikkerhedsoplysninger
Legal Disclaimer: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger dette produkt, for at reducere risikoen for brand, elektrisk stød og personskade.
