PELONIS FS40-8JR 16-Inch 3-Speed Oscillating Pedestal Fan

Vigtige sikkerhedsinstruktioner

Please read and save these important safety instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

• Tag altid stikket ud af ventilatoren før rengøring eller service.
• Betjen ikke en ventilator med en beskadiget ledning eller stik.
• Hold ventilatoren væk fra vand og fugt.
• Sørg for, at ventilatoren er placeret på en stabil, plan overflade for at forhindre, at den vælter.
• Stik ikke fingre eller genstande ind gennem gitteret, når ventilatoren er i drift.
• Denne ventilator er kun til indendørs brug.

Produkt overview

The PELONIS FS40-8JR is a 16-inch oscillating pedestal fan designed to provide efficient airflow and cooling in various indoor environments. Its adjustable height and wide-angle oscillation ensure comprehensive air distribution.

Figure 1: PELONIS FS40-8JR Pedestal Fan. This image displays the complete fan assembly, highlighting its white finish, the protective grille, fan blades, central control panel, the adjustable stand with a remote control holder, and the stable round base.

Nøglefunktioner:

• Wide-angle oscillation and tilt for broad air coverage.
• Convenient 4-hour timer function.
• Remote control with a dedicated holder for easy access.
• Adjustable height to suit different cooling needs.
• Stable round base for secure placement.
• Three-speed settings (Low, Medium, High).

Reservedelsliste

Before assembly, ensure all parts are present and undamaged. Refer to the diagram in the Product Overview section for visual identification.

• Frontgitter
• Bageste gitter
• Ventilatorblade
• Motorhus
• Kontrolpanel
• Justerbar stativstang
• Rund base
• Fjernbetjening
• Fjernbetjeningsholder
• Fasteners (nuts, screws, washers - specific types may vary)

Opsætning og montering

Minimal assembly is required to set up your PELONIS pedestal fan. Follow these steps carefully:

1. Saml basen: Attach the adjustable stand pole securely to the round base using the provided fasteners. Ensure it is stable and upright.
2. Attach Motor Housing: Mount the motor housing onto the top of the adjustable stand pole. Secure it firmly.
3. Install Rear Grille: Place the rear grille onto the motor housing, aligning it correctly.
4. Mount Fan Blades: Carefully slide the fan blades onto the motor shaft. Secure them with the retaining cap or nut.
5. Fastgør frontgitter: Position the front grille over the fan blades and secure it to the rear grille using the clips or screws provided. Ensure the grille is fully closed and locked for safety.
6. Isæt batterier i fjernbetjeningen: Open the battery compartment on the remote control and insert 3 AAA batteries (not included), observing polarity.
7. Attach Remote Holder: Clip the remote control holder onto the adjustable stand pole at a convenient height.

Once assembled, place the fan on a firm, level surface and plug it into a standard electrical outlet.

Betjeningsvejledning

Your PELONIS fan can be operated using the control panel on the fan unit or the included remote control.

Kontrolpanelets funktioner:

• Tænd/sluk: Press the "ON/OFF" button to turn the fan on or off.
• Hastighedskontrol: Press the "SPEED" button repeatedly to cycle through Low (L), Medium (M), and High (H) speed settings.
• Timer: Press the "TIMER" button to set the fan to operate for a specific duration (e.g., 1, 2, 4 hours). The fan will automatically turn off after the set time.
• oscillation: Press the "OSC" button (if present on the panel, otherwise use remote) to activate or deactivate the oscillation function, allowing the fan head to sweep from side to side.

Fjernbetjeningsfunktioner:

The remote control provides convenient operation from a distance. Ensure the remote is pointed towards the fan's control panel for optimal response.

• Power knap: Tænder eller slukker for blæseren.
• Hastighedsknapper: Separate buttons for Low, Medium, and High speeds, or a single button to cycle through them.
• Timer knap: Indstiller driftstimeren.
• Oscillationsknap: Activates or deactivates the oscillation feature.

Justering af højde og hældning:

• Højde: Loosen the height adjustment knob on the stand pole, raise or lower the fan to the desired height, and then tighten the knob securely.
• Vip: Gently push the fan head up or down to adjust the vertical angle of airflow.

Vedligeholdelse og rengøring

Regular cleaning and maintenance will help ensure the longevity and optimal performance of your fan.

• Tag altid stikket ud af ventilatoren fra stikkontakten før rengøring.
• Udvendig rengøring: Brug en blød, damp klud til at tørre ventilatorens udvendige overflader af. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Rengøring af gitter: Dust and lint can accumulate on the grilles and blades. Periodically remove the front grille (refer to assembly instructions in reverse) to clean the fan blades and inside of the grilles with a soft cloth or vacuum cleaner. Ensure all parts are dry before reassembling.
• Opbevaring: Når ventilatoren ikke er i brug i længere perioder, skal den opbevares et køligt og tørt sted, helst i originalemballagen, for at beskytte den mod støv og skader.

Fejlfinding

Hvis du oplever problemer med din ventilator, kan du se følgende tabel for almindelige problemer og løsninger.

Specifikationer

Garanti og support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. You may also contact customer service for assistance with product operation, parts, or troubleshooting beyond this manual.

Kundeservice Kontakt: Please refer to the contact information provided on the product packaging or the manufacturer's official webwebsted.