1. Produktet er slutview
The LAUNCH Creader VII+ V2.0 is an advanced OBD2 diagnostic scan tool designed to provide comprehensive vehicle system analysis. It features a 3.5-inch TFT color display for clear readability and supports various diagnostic functions across multiple vehicle systems.
Figure 1: LAUNCH Creader VII+ V2.0 Main Unit
Enhedskomponenter
- Strømindikator: Lyser, når enheden er tændt.
- Kommunikationsindikator: Illuminates when the device is communicating with the vehicle.
- LCD-skærm: 3.5-inch TFT color screen for displaying information.
- OK knap: Bekræfter valg.
- ESC knap: Exits current menu or cancels operation.
- DTC knap: Accesses the Diagnostic Trouble Code (DTC) library.
- USB-port: For connecting to a computer for updates or data transfer.
- TF-kortslot: For inserting the TF card, primarily used for software updates.
2. Hvad er der i æsken
Bekræft at alle varer er til stede i pakken:
- 1pc x Launch Creader VII+ V2.0 Main Unit
- 1pc x OBDII Cable
- 1pc x USB Cable
- 1pc x Card Reader
- 1pc x Brugervejledning
Figur 2: Pakkens indhold
3. Opsætning
3.1 Indledende opstart
- Connect the OBDII cable to the Creader VII+ V2.0 unit.
- Locate the OBDII port in your vehicle (usually under the dashboard).
- Plug the OBDII connector into the vehicle's port. The device will power on automatically.
- Follow the on-screen prompts to select your preferred language. The device supports English, Spanish, French, German, Italian, Chinese, Polish, and more.
3.2 Software Update (Recommended)
To ensure optimal performance and access to the latest vehicle data, it is recommended to update the device software. There are two methods: via TF card (recommended) or via USB cable.
Video 1: Guide on how to update the LAUNCH Creader VII+ V2.0 software.
- Before starting, connect the device to a computer via its USB cable.
- On the device, navigate to "Help" -> "Tool Information" -> "Register Code" (password) and record the displayed information.
- Visit the official LAUNCH website (as indicated in the device's boot screen or manual) and download the "Updating Tool".
- Install the updating tool on your computer.
- Open the installed client software.
- Insert the TF card into its reader, then connect the TF card reader to your PC.
- In the software, type in the "Serial Number" (found on the back of the device) and the "Register Code" (password) obtained in step 2.
- Select the desired software updates and click "Download".
- Once complete, reinsert the TF card into the tool. The tool will prompt you to upgrade; select OK to proceed.
4. Betjeningsvejledning
4.1 Tilslutning til køretøjet
Ensure the vehicle's ignition is in the ON position (engine off or running, depending on the test). Connect the Creader VII+ V2.0 to the vehicle's 16-pin OBDII port.
4.2 System Diagnostics (ENG/AT/ABS/SRS)
The Creader VII+ V2.0 can access and diagnose four main vehicle systems: Engine, Transmission (AT), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS).
Figure 3: Four System Diagnostics Capability
- Læs koder: Retrieve Diagnostic Trouble Codes (DTCs) from the selected system.
- Ryd koder: Erase DTCs from the system after repairs are made, turning off warning lights.
- View Live datastrøm: Display real-time sensor data in text or graphic format.
- Read Version Info: Access ECU information.
4.3 Full OBDII Test Modes
The device supports all 10 OBDII test modes, allowing for comprehensive emissions-related diagnostics.
Figur 4: Fuld OBDII-funktioner
- Læs og ryd DTC'er: Retrieve and erase generic (P0, P2, P3, U0) and manufacturer-specific (P1, U1) codes.
- Live datastrøm: View realtidsdataparametre.
- Frys rammedata: View a snapshot of sensor values when a DTC was set.
- I/M-parathedsstatus: Kontroller status for emissionsrelaterede monitorer.
- O2-sensortest: Hent resultaterne af O2-sensormonitorens test.
- Test af indbygget skærm: Retrieve results for emission-related powertrain components.
- Test af fordampningssystem: Start en test af fordampningsemissionssystemet.
- Komponenttest: Initiate a leak test for the EVAP system.
- Køretøjsoplysninger: Retrieve VIN, Cal ID, CVN.
4.4 Nulstil funktioner
The V2.0 model includes three updated reset functions for common maintenance tasks:
Figure 5: New Reset Functions
- Olie nulstilling: Resets the oil life indicator after vehicle maintenance.
- Throttle Adaption (ETS Reset): Helps update firmware or reconfigure to match new vehicle settings for the electronic throttle system.
- SAS Relearn (Steering Angle Sensor Reset): Addresses issues related to the vehicle's service and safety systems, particularly the steering angle sensor.
4.5 Live Data Stream Display
The device can display live vehicle sensor data in text and multiple graph formats, allowing for intuitive viewing of dynamic data and identification of problems. It can show up to 4 live data streams simultaneously.
Figure 6: Multiple Live Data Streams
4.6 DTC Library & Data Management
- DTC bibliotek: A built-in library allows you to look up fault codes and view probable causes, aiding in quicker and more accurate fault location.
- Data Record and Playback: The device automatically records diagnostic information, which can be reviewred til enhver tid.
- PC Print: Diagnostic reports can be printed after connecting the device to a PC.
Figur 7: Yderligere funktioner
Video 2: Demonstration of diagnostic functions including ABS, SRS, Transmission, and Engine code reading.
5. Køretøjskompatibilitet
The LAUNCH Creader VII+ V2.0 is compatible with over 10,000 vehicles, including 12V diesel cars, from various brands across America, Europe, and Asia. It supports vehicles from 1996 onwards that comply with the OBDII standard.
Figur 8: Bred dækning af køretøjer
Supported brands include, but are not limited to: Ford, GM, Chrysler, Nissan, Toyota, BMW, Benz, etc.
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | LANCERING |
| Operativsystem | Windows (for update software) |
| Sprogsupport | English, Spanish, French, German, Italian, Chinese, Polish, and more. |
| Automotive Fit Type | Køretøjsspecifik pasform |
| Modelnummer | 301050116 |
| Varens vægt | 1.38 pund |
| Produktdimensioner | 9.2 x 7.8 x 1.7 tommer |
| Varemodelnummer | Creader VII+ |
| Batterier | 1 Lithium Ion battery required (internal) |
| Producentens varenummer | CRP123+B00BGH0EAC |
7. Fejlfinding
Hvis du støder på problemer, skal du se følgende generelle fejlfindingstrin:
- Ingen strøm: Ensure the OBDII cable is securely connected to both the device and the vehicle's OBDII port. Check the vehicle's battery status.
- Kommunikationsfejl: Verify the vehicle's ignition is ON. Ensure the OBDII cable is not damaged. Try connecting to a different compatible vehicle to rule out device issues.
- Forkerte aflæsninger: Ensure the device software is up-to-date. Verify the vehicle information (VIN) is correctly recognized.
- Update Issues: Double-check all steps in the software update section. Ensure a stable internet connection and that the TF card is properly inserted into the card reader.
8. Garanti og support
The LAUNCH Creader VII+ V2.0 scan tool includes lifetime online updates at no additional fee and 5 years of quality care.
For any questions or support, please contact LAUNCH customer service. You can find contact information on the official LAUNCH website or refer to the legal disclaimer provided with your product.
Kundesupport: 1-888-756-2936 (Mon-Fri 9:00 AM–6:00 PM EST)
