Indledning
The WAC Lighting InvisiLED Pro LED Tape Light system provides a high-performance, low-profile lighting solution. This energy-efficient LED tape is designed for easy installation in various residential and commercial settings, including under cabinets, along granite countertops, and within crown moldings. This manual provides essential information for the safe and effective installation, operation, and maintenance of your InvisiLED Pro LED Tape Light.
Sikkerhedsoplysninger
Please read all instructions carefully before installation and retain this manual for future reference. Improper installation or use can lead to electrical shock, fire, or other hazards. Always consult a qualified electrician if you are unsure about any part of the installation process.
- Ensure power is disconnected at the circuit breaker before installation or servicing.
- Do not install in wet locations or areas exposed to direct water.
- Use only with compatible Electronic Low Voltage (ELV) dimmers if dimming functionality is desired.
- Do not exceed the maximum run length of 33 feet for the LED tape light.
- This product operates on 24 Volts DC. Ensure your power supply (transformer) is compatible.
Pakkens indhold
Your WAC Lighting InvisiLED Pro LED Tape Light package (Model LED-T2435-2IN-10WT) includes:
- 10 x 2-inch sections of InvisiLED Pro LED Tape Light (3500K Warm White)
Note: Additional components such as power supplies (transformers), connectors, and mounting channels are sold separately and are required for a complete installation.
Opsætning og installation
The InvisiLED Pro system is designed for straightforward installation. Proper planning of your layout and power requirements is crucial before beginning.
1. Planning Your Layout
Determine the total length of LED tape light required for your application. The system supports a minimum run length of 1 foot and a maximum of 33 feet. Consider the placement of your power supply (transformer) and any necessary jumper cables or connectors for corners and gaps.
2. Tilslutning af strømforsyning
An appropriate 24V DC power supply (transformer) is required. Connect the transformer to your building's electrical wiring according to local electrical codes. The transformer will have a lead wire with a female connector that connects to the LED tape light.
Figur 1: Plug and Play Connection Diagram. This image illustrates the connection of the transformer to the lead wire and then to the LED tape light, highlighting the male/female connector configuration.
3. Connecting LED Tape Light Sections
Each 2-inch section of InvisiLED Pro tape light features male and female connectors for easy linking. Simply align the pins and push the sections together to form a continuous strip. Ensure a secure connection for reliable operation.
Figur 2: InvisiLED Pro LED Tape Light Connectors. This image provides a detailed view of the LED tape light, highlighting the male and female connectors used to link multiple sections.
4. Mounting the LED Tape Light
The InvisiLED Pro tape light typically comes with an adhesive backing for easy mounting. For additional security, especially on rough or uneven surfaces, nail retainers may be used. Ensure the mounting surface is clean, dry, and smooth for optimal adhesion.
Figur 3: InvisiLED Pro LED Tape Light. This image shows a segment of the flexible LED tape light, illustrating its compact design and the placement of individual LED chips.
5. Ansøgning Eksamples
The InvisiLED Pro is versatile and can be used in various applications to enhance ambient or task lighting.
Figur 4: InvisiLED Pro in a Dining Area. This image demonstrates the application of InvisiLED Pro lighting to illuminate steps and walls in a modern dining space, providing subtle ambient light.
Figur 5: InvisiLED Pro Integrated into Wall Design. This image showcases the use of InvisiLED Pro to create linear light accents within wall panels and architectural elements, enhancing the modern aesthetic of a room.
Betjeningsvejledning
Once properly installed and connected to a power source, your InvisiLED Pro LED Tape Light will illuminate when power is supplied. The 3500K color temperature provides a warm white light suitable for various environments.
Dæmpbar funktionalitet
The InvisiLED Pro is dimmable when used with a compatible Electronic Low Voltage (ELV) dimmer. Connect the ELV dimmer between the main power supply and the transformer according to the dimmer's instructions. This allows for adjustable light output to suit your preferences.
Opretholdelse
The WAC Lighting InvisiLED Pro LED Tape Light is designed for long-lasting performance with minimal maintenance.
- Rensning: Ensure power is off before cleaning. Gently wipe the LED tape light with a soft, dry, or slightly damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- LED-levetid: LEDs have an expected long operational life. No bulb replacement is necessary.
Fejlfinding
If you encounter issues with your InvisiLED Pro LED Tape Light, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke | No power to the transformer; loose connections; faulty transformer. | Check circuit breaker. Verify all connections are secure. Test transformer output. |
| Lys flimrer eller dæmpes ujævnt | Incompatible dimmer; loose connections; power supply issue. | Ensure an ELV dimmer is used. Check all connections. Verify power supply stability. |
| Only part of the strip illuminates | Faulty section; loose connection between sections. | Inspect connections between tape light sections. Replace faulty section if necessary. |
If issues persist after attempting these steps, please contact WAC Lighting customer support or a qualified electrician.
Specifikationer
| Mærke | WAC belysning |
| Modelnummer | LED-T2435-2IN-10WT |
| Lys type | LED |
| Speciel funktion | Integreret LED-modul |
| Wattage | 50 watts (System Max) |
| Glødelampe Tilsvarende Wattage | 150 watt |
| Lys farve | Varm hvid |
| Farvetemperatur | 3500 Kelvin |
| Voltage | 24 volt |
| Lysstyrke | 207.0 lumen pr. fod |
| White Brightness (Total) | 4140 lumen |
| Color Rendering Index (CRI) | 80 |
| Antal enheder | 10.0 Count (2-inch sections) |
| Produktdimensioner | 1.31 x 1.31 x 1.31 inches (per section, approximate) |
| Varens vægt | 0.01 ounces (per section, approximate) |
| Strømkilde | Corded Electric (requires external transformer) |
| Accepteret Voltage Frekvens | 100 to 240 Volts and 50 Hertz to 60 Hertz (for transformer input) |
| Kontrolmetode | App (if integrated with smart home system, not inherent to product) |
| Effektivitet | Høj effektivitet |
| Certificering | UL-listet |
| UPC | 790576255569 |
Garanti og support
Garantioplysninger
WAC Lighting provides a Five (5) year manufacturer limited warranty on this product. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
Kundesupport
For technical assistance, warranty claims, or further information regarding your InvisiLED Pro LED Tape Light, please visit the official WAC Lighting website or contact their customer service department. Contact details can typically be found on the product packaging or the WAC Lighting webwebsted.
