Indledning
Thank you for choosing the Mount-It! Height Adjustable TV Wall Mount Bracket. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and keep it for future reference.
Billede: Forside view of the Mount-It! Height Adjustable TV Wall Mount Bracket in silver, showing the wall plate, articulating arm, and VESA mounting plate.
Sikkerhedsoplysninger
ADVARSEL: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you have any questions, please contact Mount-It! customer service.
- Do not install this product if you cannot understand the instructions or are unsure about the installation process.
- Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og skærmen.
- Use only the provided hardware. Do not use power tools to tighten screws unless specified.
- Dette produkt er kun beregnet til indendørs brug.
- Hold børn og kæledyr væk under installationen.
- Periodically check that the mount is secure and safe to use.
Pakkens indhold
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! for assistance.
| Komponent | Mængde |
|---|---|
| Vægmontering | 1 |
| VESA-monteringsplade | 1 |
| Hardware Kit (screws, anchors, washers, spacers) | 1 sæt |
| Unbrakonøgle | 1 |
| Instruktionsmanual | 1 |
Opsætning og installation
Before installation, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver) and that the wall structure is suitable for mounting.
Step 1: Determine Mounting Location and Wall Type
Identify the desired location for your TV. This mount supports installation on wood studs or concrete walls.
Image: Illustration showing mounting options for concrete walls (use lag bolts and anchors) and wood stud walls (use lag bolts).
Trin 2: Fastgør VESA-pladen til tv'et
Carefully place your TV face down on a soft, clean surface. Attach the VESA mounting plate to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
This mount is compatible with VESA patterns: 100x100, 200x100, 200x200, 300x300, 400x200, and 400x400 mm.
Image: Diagram illustrating various VESA mounting patterns (100x100, 200x200, 400x400) and indicating compatibility with screen sizes from 25" to 55" and a maximum display weight of 44 lbs.
Trin 3: Monter vægpladen på væggen
Position the wall plate at the desired height and mark the drilling locations. Drill pilot holes according to your wall type (wood stud or concrete). Secure the wall plate to the wall using the lag bolts and, if necessary, concrete anchors. Use a level to ensure the wall plate is perfectly horizontal.
Step 4: Hang TV onto Wall Mount
With assistance, carefully lift the TV (with the VESA plate attached) and hook it onto the wall mount arm. Ensure it is securely seated. Tighten any safety screws or mechanisms to prevent accidental dislodging.
Betjeningsvejledning
Your Mount-It! TV Wall Mount Bracket offers a dynamic range of motion for optimal viewing.
Højdejustering
The gas spring arm allows for smooth vertical height adjustments. Gently push or pull the TV to the desired height. The mount provides up to 13.5 inches of height adjustment.
Image: The TV mount demonstrating a 13.5-inch vertical height adjustment range.
Arm Extension and Tilt
Extend the arm up to 21 inches from the wall or retract it to a minimum of 2.5 inches. The mount also allows for a tilt range of +/- 15 degrees to reduce glare and optimize viewing vinkler.
Image: The TV mount showing its arm extension from a minimum of 2.5 inches to a maximum of 21 inches, and a tilt range of +/- 15 degrees.
Justering af drejning
The mount features multiple swivel joints, allowing for extensive horizontal rotation. The wall-side joint swivels 180 degrees, the middle joint swivels 270 degrees, and the TV-side joint swivels 180 degrees, providing full motion flexibility.
Image: Diagram illustrating the swivel capabilities of the mount: 180 degrees at the wall, 270 degrees in the middle, and 180 degrees at the TV plate.
Opretholdelse
Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.
- Rensning: Tør holderen af med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Periodisk kontrol: Every few months, check all screws and connections to ensure they are tight and secure.
- Gas Spring Tension: If the TV is dropping or not holding its position, the gas spring tension may need adjustment.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV is dropping or not holding height. | Gas spring tension is too loose for the TV's weight. | Tighten the arm tension using the provided Allen wrench. Turn counter-clockwise for heavier monitors, clockwise for lighter monitors. Refer to the diagram below. |
| Mount feels too stiff to move. | Gas spring tension is too tight. | Loosen the arm tension using the provided Allen wrench. |
| Mount is wobbly after installation. | Wall plate not securely fastened or wall structure is inadequate. | Re-check all wall plate screws and ensure they are tightened. Verify the wall can support the weight. If unsure, consult a professional. |
Image: Instructions on how to adjust the arm tension using an Allen wrench. Turn counter-clockwise for heavier displays and clockwise for lighter displays, with a maximum display weight of 44 pounds.
Specifikationer
- Modelnummer: MI-442
- Mærke: Monter den!
- Materiale: Legeret stål
- Farve: Sort
- Monteringstype: Vægmontering
- Bevægelsestype: Artikulerende
- Kompatible skærmstørrelser: 25 to 47 Inches (Maximum Compatible Size: 47 Inches, Minimum Compatible Size: 25 Inches)
- Maksimal vægtkapacitet: 44 lbs
- VESA-kompatibilitet: 100x100, 200x100, 200x200, 300x300, 400x200, 400x400 mm
- Maksimal hældningsvinkel: 30 grader
- Drejelig: Over 180 degrees
- Højdejustering: Op til 13.5 tommer
- Armforlængelse: 2.5 tommer (min.) til 21 tommer (maks.)
- Produktdimensioner: 19.8 x 15.8 x 3.8 tommer
- Varens vægt: 11.11 pund
Image: Detailed dimensional drawing of the Mount-It! TV mount, showing arm lengths, wall plate size, and overall extension.
Garanti og support
Mount-It! products are designed for durability and performance. For warranty information or technical support, please visit the official Mount-It! webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering til garantikrav.
Kontaktoplysninger: Refer to the product packaging or the official Mount-It! webwebstedet for de seneste supportoplysninger.
