Indledning
This manual provides essential information for the safe and effective use of your Sunlite T3.25 Specialty Mini-Tube Bulb. Please read these instructions carefully before installation and operation.
The Sunlite T3.25 Specialty Mini-Tube Bulb is a 2.8-watt, 28-volt incandescent bulb designed for various applications including automotive and indicator lighting. It features a miniature wedge W2.1x9.5d base and emits a soft 2800K white light. This 10-pack offers reliable performance for specialized lighting needs.
Image: A pack of ten Sunlite T3.25 Specialty Mini-Tube Bulbs, showcasing their clear glass and filament design.
Vigtige sikkerhedsoplysninger
ADVARSEL: Electrical shock hazard. Disconnect power before installation or servicing.
- Overskrid ikke den angivne voltage (28 Volts). Using the bulb with higher voltage can cause premature failure or damage.
- Handle bulbs with care. Avoid touching the glass directly with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves if necessary.
- Ensure the bulb is securely seated in the socket to prevent flickering or poor connection.
- Do not use in wet locations unless the fixture is specifically rated for such use.
- Bortskaf brugte pærer i henhold til lokale miljøforskrifter.
Opsætning og installation
Udpakning
Carefully remove the bulbs from their packaging. Inspect each bulb for any signs of damage, such as cracks in the glass or a broken filament. Do not install damaged bulbs.
Installationstrin
- Trin 1: Afbryd strømmen. Before attempting any installation, ensure the power supply to the fixture is completely turned off at the circuit breaker or fuse box. This is crucial to prevent electrical shock.
- Step 2: Identify Socket Type. Confirm that your fixture uses a miniature wedge W2.1x9.5d base socket, which is compatible with this bulb. Refer to the product specifications for base dimensions.
- Step 3: Insert Bulb. Gently push the bulb's wedge base into the socket until it is firmly seated. Do not force the bulb, as this may damage the base or the socket.
- Trin 4: Genopret strømmen. Når pæren er sikkert installeret, skal du genoprette strømmen til armaturet fra afbryderen eller sikringsboksen.
- Trin 5: Testdrift. Turn on the light switch to verify the bulb is functioning correctly.
Billede: Detaljeret view of the Sunlite T3.25 Mini-Tube Bulb, highlighting its dimensions (0.98 in length, 0.39 in width) and key electrical specifications.
Betjeningsvejledning
The Sunlite T3.25 Mini-Tube Bulb operates immediately upon receiving power. Simply use the fixture's switch or control mechanism to turn the light on or off. This bulb is designed for continuous operation within its specified voltaget spændingsområde på 28 volt.
Image: An entryway illuminated by soft white light, demonstrating the bulb's application in dome lighting or indicator lighting.
Opretholdelse
These bulbs require minimal maintenance due to their design and intended use.
Rensning
If cleaning is necessary, ensure the power is off and the bulb is cool to the touch. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the bulb's surface or internal components.
Udskiftning
When the bulb reaches the end of its lifespan (approximately 1000 hours), it will cease to illuminate. To replace, follow the "Installation Steps" outlined in the Setup and Installation section, ensuring power is disconnected before removing the old bulb and installing a new one.
Fejlfinding
If your Sunlite T3.25 Mini-Tube Bulb is not functioning as expected, refer to the following common issues and solutions:
Pære lyser ikke
- Ingen strøm: Check if the power supply to the fixture is on. Verify the circuit breaker or fuse for the circuit.
- Løs forbindelse: Ensure the bulb is fully and securely inserted into the socket. A loose connection can prevent the bulb from lighting.
- Forkert bindtage: Confirm that the fixture's voltage matches the bulb's 28V requirement. Using an incompatible voltage can prevent operation or damage the bulb.
- Burned Out Bulb: If the filament appears broken or the bulb has been in use for an extended period (beyond its approximate 1000-hour lifespan), it may have reached the end of its life. Replace with a new bulb.
- Damaged Socket: Inspect the socket for any visible damage, corrosion, or bent contacts. If the socket is damaged, consult a qualified electrician for repair or replacement.
Produktspecifikationer
| Feature | Detalje |
|---|---|
| Mærke | Sunlite |
| Modelnummer | 400 2.8W/T3.25/28V/CL/W |
| Lys type | Glødelampe |
| Wattage | 2.8 watt |
| Ampslet Kapacitet | 0.1 Amps |
| Voltage | 28 volt |
| Pære form størrelse | T3.25 (Mini-Tube) |
| Pære base | Miniature Wedge (W2.1x9.5d) |
| Lys farve | Blød hvid |
| Farvetemperatur | 2800 Kelvin |
| Lysstyrke | 280 lumen |
| Filament type | C-2F |
| Slutte | Klar |
| Materiale | Glas |
| Levetid | Ca. 1000 timer |
| Produktdimensioner | 0.98 x 0.39 x 0.39 tommer |
| Varens vægt | 0.32 ounces (ca. 9.07 g) |
| Indendørs/Udendørs brug | Indoor, Outdoor (as per fixture rating) |
| UPC | 653703072029 |
Image: Visual representation of key features including 1000-hour lifespan, mini-tube shape, energy efficiency, and C-2F filament.
Garanti og support
Sunlite products are designed for reliability. Please refer to the product packaging for specific warranty details. The manufacturer's warranty description states: "Please see packaging for details."
For technical assistance, product inquiries, or further support, please visit the official Sunlite website or contact their customer support channels. You can also visit the Sunlite Store on Amazon for mere information.
