1. Produktet er slutview
The JVD Expair Hand Dryer is an advanced, high-performance hand drying solution. It utilizes pulsed air technology to achieve ultra-fast drying times, typically under 20 seconds, while maintaining energy efficiency. Its robust design and integrated electronic security make it a reliable choice for public and commercial restrooms. The unit also features a distinctive blue lighting effect during operation.
Nøglefunktioner:
- Ultra-fast drying time (less than 20 seconds)
- Energieffektiv drift
- Automatisk aktivering
- Integrated electronic security
- Blue operational lighting
- Designed with accessibility in mind (PMR and young children friendly)
Figur 1.1: Forside view of the JVD Expair Hand Dryer, showcasing its sleek design and grey finish.
2. Sikkerhedsoplysninger
Læs alle sikkerhedsinstruktioner omhyggeligt inden installation og betjening. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.
- Sørg for, at strømforsyningen er afbrudt før installation, vedligeholdelse eller rengøring.
- Do not operate the hand dryer with a damaged cord or plug.
- Bloker ikke luftindtaget eller -udtaget under drift.
- Hold hænder og fremmedlegemer væk fra luftudløbet under drift.
- Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af apparatet af en person, der er ansvarlig for deres sikkerhed.
- Børn skal være under opsyn for at sikre, at de ikke leger med apparatet.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede ved udpakning. Hvis der mangler eller er beskadigede dele, skal du straks kontakte din leverandør.
- JVD Expair Automatic Hand Dryer Unit
- Monteringsudstyr (skruer, vægankre)
- Installationsskabelon (hvis relevant)
- Brugervejledning (dette dokument)
4. Opsætning og installation
The JVD Expair Hand Dryer is designed for wall-mounted installation. Professional installation by a qualified electrician is highly recommended to ensure proper wiring and adherence to safety standards.
4.1. Valg af sted
- Choose a location with adequate space for hand drying and proper air circulation.
- Ensure the wall material can support the weight of the unit (7.8 kg).
- Consider accessibility for all users, including those with reduced mobility and children.
- Avoid installing directly above water sources or in areas with excessive humidity.
4.2. Monteringsvejledning
- Afbryd strømmen: Sluk for hovedstrømforsyningen ved afbryderen, før installationen påbegyndes.
- Markér borepunkter: Use the provided installation template (if available) or measure and mark the drilling points on the wall according to the unit's mounting holes. Refer to the dimensions diagram below.
- Bore huller: Bor huller på de markerede punkter med et passende bor til din vægtype. Indsæt vægankre om nødvendigt.
- Sikker monteringsplade (hvis relevant): Hvis din model har en separat monteringsplade, skal den fastgøres til væggen med de medfølgende skruer.
- Ledningsforbindelse: Connect the electrical wiring to the hand dryer's terminal block. Ensure correct polarity (Live, Neutral, Earth) and secure all connections.
- Monter enheden: Carefully align the hand dryer with the mounting plate or wall holes and secure it firmly with the remaining screws.
- Gendan strøm: Once the unit is securely mounted and all connections are checked, restore power at the circuit breaker.
Figure 4.1: Technical drawing showing the dimensions of the JVD Expair Hand Dryer (dimensions in mm: 343 width, 430 height, 237 depth).
5. Betjeningsvejledning
The JVD Expair Hand Dryer operates automatically using an infrared sensor.
- Aktiver: Place your hands under the air outlet. The sensor will detect your hands and automatically activate the air flow. Blue lighting will illuminate during operation.
- Tørre hænder: Move your hands slowly back and forth within the drying zone to ensure even and efficient drying.
- Deaktiver: Remove your hands from the drying zone. The hand dryer will automatically stop after a few seconds.
Figure 5.1: The hand dryer showing the sensor area, indicated by hand symbols, where users should place their hands for activation.
6. Vedligeholdelse
Regular maintenance ensures optimal performance and extends the lifespan of your hand dryer. Always disconnect power before performing any maintenance.
6.1. Rensning
- Ydre: Tør den ydre overflade af med en blød,amp cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals, solvents, or abrasive pads.
- Luftindtag/udtag: Periodically check and clean the air inlet and outlet grilles to remove any dust or debris that may accumulate. Use a soft brush or vacuum cleaner.
6.2. Filter Cleaning (if applicable)
Some models may include an air filter. Refer to the specific instructions for your model regarding filter access and cleaning frequency. Typically, filters should be cleaned or replaced every 3-6 months depending on usage.
7. Fejlfinding
If you encounter issues with your JVD Expair Hand Dryer, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Hand dryer does not activate. | No power supply; Sensor obstructed or dirty; Unit malfunction. | Check circuit breaker; Clean sensor lens; Contact qualified technician. |
| Air flow is weak. | Blocked air inlet/outlet; Dirty air filter (if applicable). | Clean grilles; Clean or replace air filter. |
| Hand dryer runs continuously. | Sensor malfunction; Obstruction in sensor path. | Clean sensor lens; Remove any obstructions; Contact qualified technician. |
| Usædvanlig støj under drift. | Løse komponenter; Motorproblem. | Disconnect power and check for loose parts (if safe to do so); Contact qualified technician. |
For issues not listed above or if solutions do not resolve the problem, please contact JVD customer support or a qualified service technician.
8. Specifikationer
| Attribut | Værdi |
|---|---|
| Fabrikant | JVD |
| Modelnummer | 340 (811822) |
| Produktmål (L x B x H) | 34 x 23.4 x 43 cm |
| Vægt | 7.8 kilo |
| Farve | Grå |
| Materiale | Metal |
| Magt | 1200 watt |
| Tørretid | Mindre end 20 sekunder |
| Batterier påkrævet | Ingen |
Figure 8.1: The JVD Expair Hand Dryer seamlessly integrated into a modern public restroom environment.
9. Garanti og support
JVD products are manufactured to high quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
9.1. Kundesupport
For technical assistance, warranty claims, or spare parts inquiries, please contact your authorized JVD distributor or visit the official JVD website. When contacting support, please have your model number and purchase date available.
Note: Information regarding the availability of spare parts for this specific model is currently unavailable. Please contact JVD directly for the most up-to-date information.
