Stryker SR-655 10 Meter Amateur Radio Instruction Manual

Indledning

The Stryker SR-655HPC is a high-performance 10 Meter Amateur Radio designed for reliable and clear long-range communication. This radio features a unique design for high power output, utilizing four IRF-520 MOSFET transistors to achieve 60+ watts PEP. It is equipped with an 8-color LED-backlit faceplate with dimmer control, ensuring comfortable viewing in various lighting conditions. The SR-655HPC supports AM, FM, and SSB modes, and includes advanced features such as variable transmit frequency response, receiver tone control, digital echo, and multiple Roger beeps.

Figure 1: Stryker SR-655HPC 10 Meter Amateur Radio with connected microphone.

Nøglefunktioner

• Høj effekt: Utilizes four FQP13N10 MOSFET transistors for 70W PEP.
• Multi-mode betjening: Supports AM, FM, and SSB.
• Brilliant 7-Color LED Backlit Faceplate: User-selectable colors or automatic scanning, with 32-position dimmer control.
• Avancerede lydfunktioner: Loud & Clear Receiver, Excellent Stock Mic, Digital Echo with dual front-mounted controls, Variable Talkback Control, Six Roger Beeps.
• Frekvenskontrol: Advanced Clarifier, VFO (Variable Frequency Oscillator), PC Programmable.
• Up-Armored Receiver: Exclusive receiver protection for superior adjacent channel rejection, even in high-interference environments.
• Digital frekvensvisning: 7-Color frequency display.

Opsætning og installation

Proper setup is crucial for optimal performance and safety. Ensure all connections are secure before powering on the unit.

1. Strømtilslutning

Connect the radio to a stable 13.8V DC power source. A 14.2V source is recommended for best performance. Ensure correct polarity (red to positive, black to negative) to prevent damage to the unit.

2. Antennetilslutning

Connect a suitable 10-meter amateur radio antenna to the UHF SO239 connector on the rear of the radio. Use high-quality coaxial cable with proper impedance (typically 50 ohms) for efficient power transfer and minimal signal loss. Ensure the antenna is properly tuned for the 10-meter band.

3. Mikrofontilslutning

Plug the supplied microphone into the front microphone jack. Ensure the connector is fully seated.

4. Første opstart

Once all connections are made, turn the radio on using the ON/OFF/Volume control. The display should illuminate.

Figure 2: Front panel layout of the SR-655HPC, illustrating various controls and the display.

Betjeningsvejledning

This section details the functions of the various controls and how to operate your SR-655HPC radio.

Figure 3: Detailed diagram of SR-655HPC controls and their functions, as depicted on the product packaging.

Grundlæggende betjening

• ON/OFF & Volume: Rotate the leftmost knob to turn the radio on/off and adjust the receiver audio volume.
• Støjdæmpning (SQ): Adjust the SQ knob to eliminate background noise when no signal is present. Turn clockwise until the noise disappears.
• Mode Control (AM/FM/SSB): Select the desired modulation mode using the dedicated switch.
• Frekvenskontrol: Use the main FREQUENCY knob to tune to the desired operating frequency. The VFO function allows continuous frequency adjustment.
• Bandvalg: The radio supports multiple frequency bands (A-L, VFO). Refer to the manual for specific band ranges.

Avancerede kontroller

• Lysdæmper kontrol: The DIM knob adjusts the brightness of the LED display and backlighting (32 positions).
• Digital Echo: Use the ECHO and DELAY knobs to adjust the echo effect for your transmitted audio.
• Roger Beeps: The radio features six selectable Roger beeps. Activate and select them via the PRG/RB button.
• Variable Power Control: Adjust your transmit power output using the PWR control.
• Variable Talkback Control: The TALKBACK control allows you to monitor your own transmitted audio.
• Afklaring: The CLARIFIER knob provides fine-tuning for SSB reception to ensure clear audio.
• Støjdæmpning (NB) / Automatisk støjbegrænser (ANL): These functions reduce impulse noise and continuous noise respectively.
• PC-programmerbar: The radio can be programmed via a PC for advanced customization. Refer to the separate PC programming guide for details.
• Skærmfarve: Press the COLOR button to cycle through the 7 available LED display colors.

Figur 4: Eksamples of the multi-color LED display options on the SR-655HPC.

Opretholdelse

To ensure the longevity and optimal performance of your Stryker SR-655HPC, follow these maintenance guidelines:

• Rensning: Regularly wipe the exterior of the radio with a soft, dry cloth. For stubborn dirt, a slightly damp En klud kan bruges, men sørg for, at der ikke kommer fugt ind i enheden. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Ventilation: Ensure the radio's ventilation fins are clear of dust and obstructions to prevent overheating. Do not operate the radio in enclosed spaces without adequate airflow.
• Forbindelser: Kontrollér regelmæssigt alle kabelforbindelser (strøm, antenne, mikrofon) for at sikre, at de er fastgjorte og fri for korrosion.
• Opbevaring: Når radioen ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.

Fejlfinding

If you encounter issues with your SR-655HPC, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Stryker customer support or a qualified technician.

Specifikationer

Garanti og support

The Stryker SR-655HPC 10 Meter Radio comes with a warranty from its respective manufacturer. For warranty claims or technical support, please refer to the documentation included with your product or visit the official Stryker website. 10-Meter Radios are intended for use by amateur radio operators only, and a license from the FCC is required for operation in the United States.

Figure 5: Important note regarding the radio's classification.