Indledning
Welcome to your new Ziel SHUTTLE Weather Station. This device provides accurate indoor and outdoor temperature readings, a weather forecast, a radio-controlled clock with date, and a unique time projection feature. Please read this manual carefully before use to ensure proper operation and longevity of your device.
Pakkens indhold
- Ziel SHUTTLE Main Unit
- Trådløs fjernbetjening
- AC/DC Power Adapter (for main unit)
- Brugervejledning (dette dokument)
Produkt overview
Hovedenhed
The main unit features a color LCD display, control buttons, and a time projection arm.
Figur 1: Ziel SHUTTLE Main Unit. Shows the main display with indoor temperature and weather forecast icons, and the projection arm displaying time.
Trådløs fjernbetjening
The remote sensor measures outdoor temperature and transmits data wirelessly to the main unit.
Figur 2: Ziel SHUTTLE Wireless Remote Sensor. Displays current temperature and indicates wireless transmission.
Opsætning
1. Powering the Remote Sensor
- Åbn batterirummet på bagsiden af fjernbetjeningssensoren.
- Insert 2 x AAA (IEC LR3) 1.5V batteries, observing polarity (+/-).
- Luk batterirummet.
2. Strømforsyning til hovedenheden
- Insert 2 x AA (IEC LR6) 1.5V batteries into the battery compartment for backup power (optional, but recommended).
- Connect the provided AC/DC adapter to the main unit's power input and then to a wall outlet. The display will light up.
3. Sensorplacering
Place the remote sensor in a shaded, dry location outdoors, away from direct sunlight and rain, to ensure accurate temperature readings. Avoid placing it near large metal objects or electronic devices that could interfere with the wireless signal. The maximum transmission range is typically 30 meters (100 feet) in open air.
4. Indledende synkronisering
Once both units are powered, the main unit will automatically attempt to connect with the remote sensor and receive the radio-controlled time signal. This process may take a few minutes. Ensure both units are within range of each other.
Betjeningsvejledning
Display overview
The color LCD display shows various information:
- Indendørs temperatur
- Outdoor Temperature (from remote sensor)
- Weather Forecast Icons (e.g., sunny, cloudy, rainy)
- Radio-Controlled Time (hours, minutes, seconds)
- Dato og ugedag
- Max/Min Temperature Memory
- Low Battery Indicator for both units
Indstilling af tid og dato
The clock is radio-controlled and should automatically set itself. If manual adjustment is needed (e.g., in areas with poor signal):
- Press and hold the "MODE" button (or similar, refer to specific button labels on the device) for 3 seconds to enter time setting mode.
- Use the "UP" or "DOWN" buttons to adjust the flashing value (e.g., hour, minute, year, month, day).
- Press "MODE" again to confirm and move to the next setting.
- Press "MODE" repeatedly to exit setting mode.
Temperatur display
The main display shows current indoor and outdoor temperatures.
Maximum/Minimum Temperature Memory: Press the "MEM" button (or similar) to view the recorded maximum and minimum temperatures for indoor and outdoor. Press again to clear the memory.
Vejrudsigt
The weather station analyzes atmospheric pressure changes to predict weather conditions for the next 12-24 hours. The forecast is represented by intuitive icons on the display. Note that this is a prediction and may not always be 100% accurate.
Tidsprojektion
The SHUTTLE features a projection arm that can display the current time onto a wall or ceiling.
- Adjust the angle of the projection arm to direct the time display.
- Press the "PROJECT" button (or similar) to activate/deactivate the projection.
- Rotate the lens on the projection arm to adjust focus.
Baggrundsbelysning
The color LCD display has an adjustable backlight. Press the "LIGHT" button (or similar) to cycle through brightness levels or to turn the backlight off.
Opretholdelse
Udskiftning af batteri
When the low battery indicator appears on the display for either the main unit or the remote sensor, replace the batteries promptly.
- Hovedenhed: 2 x AA (IEC LR6) 1.5V batteries.
- Fjernbetjening: 2 x AAA (IEC LR3) 1.5V batteries.
Always replace all batteries in a set with new ones. Do not mix old and new batteries or different types of batteries.
Rensning
Rengør enheden med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Fejlfinding
- Ingen visning på hovedenheden: Ensure the AC/DC adapter is properly connected and plugged in. Check if AA backup batteries are inserted correctly.
- Outdoor temperature not displayed or incorrect:
- Check batteries in the remote sensor.
- Ensure the remote sensor is within range of the main unit.
- Relocate the sensor to avoid interference.
- Manually re-synchronize by removing batteries from both units, then reinserting them first in the sensor, then in the main unit.
- Time not setting automatically:
- Ensure the main unit is placed away from sources of interference (e.g., TVs, computers).
- Try placing the unit near a window for better signal reception.
- Manually set the time if the radio signal is consistently weak.
- Projection unclear or not visible:
- Adjust the focus ring on the projection lens.
- Ensure the room is sufficiently dark.
- Check the angle of the projection arm.
Specifikationer
- Model: Ziel SHUTTLE (321055)
- Hovedenhedens strøm: 2 x AA (IEC LR6) 1.5V batteries (backup), AC/DC adapter (included)
- Fjernsensorens strøm: 2 x AAA (IEC LR3) 1.5V batteries
- Dimensioner (hovedenhed): Cirka 20 x 20 x 5 cm
- Vægt (hovedenhed): Cirka 500 g
- Vise: Color LCD with backlight
- Ur: Radio-controlled with date, time, seconds, calendar
- Funktioner: Max/Min temperature memory, time projection, weather forecast icons
Garanti og support
For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official Ziel webwebsted. Gem din købsbevis i tilfælde af garantikrav.
