ThruNite Archer 1A LED lommelygte brugermanual

1. Introduktion

Thank you for choosing the ThruNite Archer 1A LED Flashlight. This compact and powerful everyday carry (EDC) flashlight is designed for reliability and versatility, featuring multiple brightness levels and a durable aluminum construction. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Sikkerhedsoplysninger

• Øjensikkerhed: Do not shine the flashlight directly into eyes. The powerful LED light can cause temporary vision impairment.
• Børn: Keep the flashlight out of reach of children to prevent accidental activation or misuse.
• Batterisikkerhed: Use only recommended batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the flashlight will not be used for an extended period to prevent leakage.
• Varme: The flashlight head may become warm during prolonged use on higher modes. This is normal.

3. Pakkens indhold

Upon opening your ThruNite Archer 1A package, please verify that all items listed below are present:

• ThruNite Archer 1A LED Flashlight
• Brugermanual
• Snor
• Reserve O-ringe (2)
• Spare Tail Cap Button

Image: Contents of the ThruNite Archer 1A package, including the flashlight, user manual, lanyard, spare O-rings, and a spare tail cap button.

4. Produktet er slutview

The ThruNite Archer 1A features a robust design with key components for optimal performance.

Image: ThruNite Archer 1A flashlight, angled view, showing the head, body, and pocket clip.

Komponenter:

• Hoved: Contains the LED emitter, reflector, and lens.
• Side switch: Used for changing brightness modes.
• Legeme: The main housing with knurling for grip.
• Lommeklemme: Removable steel clip for secure carrying.
• Halekappe: Houses the tactical tail switch for power on/off.

Image: Close-up of the flashlight head, showing the side switch and the 'Archer 1A V3' model designation.

Image: Close-up of the flashlight body, showing the ThruNite branding and knurling for grip.

Image: Close-up of the LED emitter and reflector inside the flashlight head.

5. Opsætning

Installation af batteri

1. Unscrew the tail cap counter-clockwise to open the battery compartment.
2. Insert one 1.5V AA battery (Alkaline or Ni-MH rechargeable) with the positive (+) end facing towards the flashlight head. The Archer 1A is also compatible with 14500 Li-ion batteries for higher output.
3. Screw the tail cap back on clockwise until it is fully tightened. Ensure the tail cap is securely fastened to maintain waterproofing.

6. Betjeningsvejledning

Tænd/sluk

• At tænde: Fully press the tactical tail switch until it clicks.
• At slukke: Fully press the tactical tail switch again until it clicks.
• Øjeblikkelig tændt: Lightly press and hold the tail switch for momentary illumination. Release to turn off.

Changing Brightness Modes

The Archer 1A features multiple brightness levels: Firefly, Low, Medium, High, and Strobe.

• With the flashlight turned on, twist the bezel (the front part of the head) to cycle through the modes: Firefly → Low → Medium → High.
• Strobetilstand: From any mode, press and hold the side switch for approximately 1 second to activate Strobe mode. To exit Strobe, release the side switch and twist the bezel.

Hukommelsesfunktion

The Archer 1A includes a memory function. When the flashlight is turned off and then back on, it will automatically return to the last used general mode (Firefly, Low, Medium, or High). Strobe mode is not memorized.

7. Vedligeholdelse

• Rensning: Rengør lommelygtehuset med en blød,amp cloth. For stubborn dirt, use a mild soap solution. Do not use harsh chemicals or abrasives.
• Gevind og O-ringe: Periodically lubricate the threads and O-rings with silicone grease to ensure smooth operation and maintain waterproofing. Replace worn O-rings with the provided spares.
• Batteriopbevaring: If the flashlight is not used for an extended period, remove the battery to prevent potential leakage and damage to the flashlight.

8. Fejlfinding

If you encounter issues with your ThruNite Archer 1A, please try the following steps:

• Lyset tænder ikke:
  • Sørg for, at batteriet er isat korrekt med den positive (+) ende mod hovedet.
  • Check if the battery has sufficient charge. Replace or recharge if necessary.
  • Ensure the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
  • Clean the battery contacts and threads with an alcohol swab to remove any dirt or corrosion.
• Light flickering or inconsistent output:
  • Kontroller batteriets opladning, og udskift det, hvis det er lavt.
  • Ensure the tail cap and head are securely tightened.
  • Rengør batteriets kontakter og gevind.

If these steps do not resolve the issue, please contact ThruNite customer support.

9. Specifikationer

10. Garanti og support

ThruNite products are manufactured to high-quality standards. For warranty information, product support, or to purchase accessories, please visit the official ThruNite webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For yderligere hjælp kan du besøge ThruNite-butikken på Amazon.