Harbor Breeze termostatisk loftsventilator fjernbetjening universalsæt brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Harbor Breeze Thermostatic Ceiling Fan Remote Control Universal Kit. This kit is designed to add remote control functionality to most standard ceiling fans, offering convenient control over fan speeds, light operation, and an advanced thermostatic feature for automated comfort.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

2. Sikkerhedsoplysninger

• ADVARSEL: To reduce the risk of fire or injury, DO NOT USE THIS PRODUCT IN CONJUNCTION WITH A VARIABLE (RHEOSTAT) WALL CONTROL.
• Always disconnect power at the circuit breaker or fuse box before attempting any installation or wiring.
• Hvis du ikke er bekendt med elektriske ledninger, bør du kontakte en kvalificeret elektriker.
• Sørg for, at alle elektriske tilslutninger overholder lokale forskrifter og bestemmelser.
• Do not use this remote kit with solid-state fan speed controls.
• This remote control is for indoor use only.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Receiver Unit (1)
• Handheld Remote Control (1)
• Wall Mount Holder for Remote (1)
• Trådnødder (5)
• Screws for Wall Mount (2)

4. Opsætning og installation

1. Forbered til installation:
   • Turn off power to the ceiling fan at the main circuit breaker or fuse box.
   • Ensure the existing ceiling fan's pull chains (if any) are set to the HIGH speed for the fan and ON for the light kit. This is crucial for the remote to function correctly.
   • Fjern loftsventilatorens baldakin for at få adgang til ledningerne.
2. Set DIP Switches (if applicable):

   The receiver unit and remote control may have DIP switches (small switches, usually 4) to set a unique frequency code. Ensure the switches on both the receiver and the remote are set to the exact same pattern. This prevents interference with other remote-controlled devices.

3. Wire the Receiver Unit:

   Connect the receiver unit into the ceiling fan's wiring as follows. Refer to Image 1 for visual guidance on receiver wires:

   • Tilslut Black wire (AC IN L) from the receiver to the Black (hot) wire from the ceiling.
   • Tilslut White wire (AC IN N) from the receiver to the White (neutral) wire from the ceiling.
   • Tilslut Blue wire (TO LIGHT) from the receiver to the Blue (light) wire fra ventilatoren.
   • Tilslut Black wire (TO MOTOR L) from the receiver to the Black (fan motor) wire fra ventilatoren.
   • Tilslut White wire (TO MOTOR N) from the receiver to the White (neutral) wire fra ventilatoren.
   • Secure all connections with the provided wire nuts (Image 2).
4. Placer modtageren:

   Carefully tuck the wired receiver unit into the ceiling fan's canopy. Ensure no wires are pinched and there is adequate space for air circulation. The receiver should fit snugly but without excessive force.

5. Gendan strøm:

   Reattach the ceiling fan canopy. Turn the power back on at the circuit breaker. Your remote control system is now ready for operation.

5. Betjeningsvejledning

The handheld remote control (refer to Image 1) provides comprehensive control over your ceiling fan and light kit.

5.1. Ventilator kontrol

• Ventilatorhastighedsknapper: Use the dedicated buttons (often labeled with fan icons or speed levels) to cycle through fan speeds (Low, Medium, High) or to turn the fan off. The remote's display will show the current fan speed setting.
• VENTILATOR AUTO: Activates the thermostatic control feature. When enabled, the fan will automatically adjust its speed based on the room temperature. You can set a desired starting temperature, and the fan will increase speed as the temperature rises, and decrease as it falls.
• FAN TIMER: Sets a timer for the fan to operate for a specific duration before automatically turning off. Pressing this button typically cycles through preset timer options (e.g., 1 hour, 2 hours, 4 hours, 8 hours).

5.2. Lysstyring

• Lys til/fra: Press the light button (often labeled with a light bulb icon) to turn the light kit on or off.
• Dæmpningsfunktion: To dim the light, press and hold the light button. The light will cycle through its brightness levels (low to high, then high to low). Release the button when the desired brightness is reached.
• LIGHT TIMER: Sets a timer for the light to turn off automatically after a set period.
• LIGHT DELAY: May offer a delayed turn-off feature for the light, allowing you to leave the room before the light extinguishes.

5.3. Temperature/Hour Setting

• SET TEMP/HOUR: This button is used to adjust the temperature setting for the FAN AUTO mode or to set the duration for timer functions. Consult the remote's display for specific adjustments.

6. Vedligeholdelse

• Udskiftning af batteri: The handheld remote control requires batteries (typically AAA or 9V, check the battery compartment). When the remote's range decreases or it becomes unresponsive, replace the batteries. Ensure correct polarity.
• Rensning: Wipe the remote control and receiver unit with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the units.
• Opbevaring: Hvis fjernbetjeningen opbevares i længere tid, skal batterierne tages ud for at forhindre lækage.

7. Fejlfinding

8. Specifikationer

• Mærke: HAVNEBRIS
• Modelnummer: 895940001268
• Controller type: Fjernbetjening
• Speciel funktion: Programmable, Thermostatic Control
• Specifikke anvendelser: Ceiling fan control
• Temperaturkontroltype: Automatisk
• Forbindelse teknologi: RF (Radio Frequency)
• Forbindelsesprotokol: IR (Infrared) - Note: Product specifications list both RF and IR. RF is typically for the main control, IR might be for specific functions or older models. For this universal kit, RF is more common for range.
• Inkluderede komponenter: Transmitter unit, Ceiling Fan Remote Control
• Strømkilde: Batteridrevet (fjernbetjening)
• Voltage: 120 volt
• Materiale: Plast
• Skærmtype: LED (on remote)
• Baggrundsbelysning: Yes (on remote)
• Wattage: 75.00 (likely maximum load for light/fan)
• Varens vægt: 8 ounce
• Monteringstype: Wall Mount (for remote holder)

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Harbor Breeze webwebsted. Gem din købsbevis i tilfælde af garantikrav.

For further assistance, you may contact Harbor Breeze customer service through their official channels.