Marathon CL030033WD Atomic Selvindstillende Vægur Brugermanual

1. Introduktion

Thank you for choosing the Marathon CL030033WD Atomic Self-Setting Wall Clock. This clock is designed for accuracy and convenience, automatically synchronizing with the atomic time signal to ensure precise timekeeping. It also features a clear digital display, multiple time zones, and temperature readings. This manual provides detailed instructions for setting up, operating, and maintaining your new clock.

Billede 1.1: Forside view of the Marathon CL030033WD Atomic Self-Setting Wall Clock, displaying time, date, day, and temperature.

2. Produktfunktioner

• Atomisk tidssynkronisering: Automatically sets and adjusts time via the WWVB radio signal for precise accuracy.
• Stort, letlæseligt display: Clear digital display for time, date, day of the week, and indoor temperature.
• Flere tidszoner: Supports 8 selectable time zones.
• Self-Setting: Simply insert batteries for automatic setup.
• Alsidig montering: Includes a built-in table stand and wall-mount option.
• Slankt design: Features a brushed steel effect frame with a wood tone finish.
• Temperaturvisning: Shows indoor temperature in both Celsius and Fahrenheit.

Image 2.1: The Marathon Atomic Wall Clock in a room setting, highlighting its large, easy-to-read display, multiple modes (time, date, temperature), and 8 time zone capability.

Image 2.2: Close-up of the clock face with icons representing its self-setting function, versatile mounting options, and sleek design.

Billede 2.3: Detaljeret view of the clock's dynamic display, showing the date, day of the week, and temperature in both Celsius and Fahrenheit.

3. Pakkens indhold

Kontroller venligst pakkens indhold for at sikre, at alle varer er til stede:

• Marathon CL030033WD Atomic Self-Setting Wall Clock
• 2 x AA batterier
• Brugervejledning (dette dokument)

4. Opsætning

4.1 Batteriinstallation

1. Find batteridækslet på bagsiden af ​​uret.
2. Fjern dækslet.
3. Insert the two AA batteries, ensuring the correct polarity (+ and -).
4. Sæt batterirummets dæksel på igen.

4.2 Initial Power-Up and Atomic Signal Reception

Upon battery installation, the clock will automatically power on and begin searching for the WWVB atomic time signal. This process may take several minutes to several hours, depending on your location and environmental conditions. During this time, the signal reception indicator (often a wave icon) will flash.

• For optimal signal reception, place the clock near a window, away from electronic devices that may cause interference.
• The clock is designed to receive signals primarily in North America. Signal strength may vary in other regions.
• Once the signal is successfully received, the time and date will automatically set, and the signal indicator will become solid.

Image 4.1: The Marathon Atomic Wall Clock displayed in a living room, illustrating its ease of setup and use, including battery installation.

5. Betjeningsvejledning

The clock's display provides the following information:

• Tid: Large digits indicate the current time (12-hour format with AM/PM indicator).
• Dato: Måned og dag.
• Ugens dag: Forkortet dagsnavn.
• Temperatur: Indendørstemperatur i Celsius eller Fahrenheit.
• Atomsignalindikator: Shows the status of atomic signal reception.

5.1 Knapfunktioner

The clock typically has buttons on the back for various settings. Common buttons include:

• SÆT: Enters or confirms setting modes.
• KØRSELSVEJLEDNING: Toggles between display modes or setting options.
• WAVE / RCC: Manually initiates atomic signal search.
• TIDSZONE: Selects the desired time zone.
• +/C/F: Adjusts values during setting or switches temperature unit (Celsius/Fahrenheit).

6. Tidszoneindstilling

To set your local time zone:

1. Tryk på TIDSZONE button. The current time zone will begin to flash.
2. Tryk på + or - button (if available, or MODE/SÆT) to cycle through the available time zones (e.g., PST, MST, CST, EST, AST, NST, HST, AKST).
3. Once your desired time zone is displayed, press the SÆT button to confirm. The clock will then adjust to the correct time for that zone after receiving the atomic signal.

7. Manuel tidsindstilling

If the atomic signal is consistently unavailable or if you prefer to set the time manually:

1. Tryk og hold på SÆT button for approximately 3-5 seconds until the hour digits begin to flash.
2. Brug + or - knappen for at justere timen.
3. Trykke SÆT again to move to the minute digits, then adjust with + or -.
4. Fortsæt med at trykke SÆT for at gennemgå indstillingerne for år, måned og dag, og justere hver med + or -.
5. After setting all desired parameters, press SÆT one last time to exit the manual setting mode.

Note: If the atomic signal is enabled, the clock may attempt to override manual settings once a strong signal is received. To prevent this, you may need to disable the atomic synchronization feature if available (refer to specific button functions on your clock).

8. Vedligeholdelse

8.1 Udskiftning af batteri

When the display dims or the clock stops functioning, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. Always use fresh AA alkaline batteries.

8.2 Rengøring

To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or chemical solvents, as these may damage the clock's finish or display.

9. Fejlfinding

10. Specifikationer

Image 10.1: The Marathon Atomic Wall Clock illustrating its physical dimensions, including overall width (9 inches / 23 cm), height (5.7 inches / 14.5 cm), and digit height (4 inches / 10 cm).

11. Garanti og support

Marathon products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Marathon website. For technical support or inquiries, please contact Marathon customer service through their official channels.