1. Introduktion
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Snom IP 710 Phone. The Snom 710 is designed for business telephony, offering a rich set of features for real-time communication.
Nøglefunktioner omfatter:
- 4 Line Backlit B/W Display
- 12 Identities/Lines support
- 5 Programmable function keys
- Support for four SIP identities
2. Pakkens indhold
Før du fortsætter med opsætningen, skal du kontrollere, at alle komponenter er til stede i pakken:
- Snom IP 710 Phone unit
- Håndsæt
- Håndsæt ledning
- Ethernet-kabel
- Strømadapter (hvis du ikke bruger Power over Ethernet - PoE)
- Skrivebordstativ
Figure 1: Snom IP 710 Phone unit with handset. This image displays the black phone unit from a slight angle, highlighting its display, keypad, and the coiled handset cord.
3. Opsætning
3.1. Fysisk forbindelse
- Tilslut håndsættet: Sæt den ene ende af den spiralformede håndsætledning i håndsættet og den anden ende i den dertil indrettede håndsætport på telefonbasen.
- Opret forbindelse til netværk:
- Brug af Power over Ethernet (PoE): Connect an Ethernet cable from your PoE-enabled network switch or router to the LAN port on the back of the phone. The phone will power on automatically.
- Brug af strømadapter: If PoE is not available, connect the Ethernet cable from your network to the LAN port, and then connect the power adapter to the phone's power input and a wall outlet.
- Position the Desk Stand: Attach the desk stand to the back of the phone unit to position it at a comfortable viewvinkel.
3.2. Første opstart og konfiguration
Upon successful connection, the phone will power on and begin its boot sequence. The display will show boot progress and then attempt to obtain network settings (IP address) via DHCP. Once connected to the network, it will attempt to register with your SIP server.
- Skærmstatus: Observe the display for network and registration status. A successful registration typically shows the line status as "Registered" or similar.
- Adgang Web Interface: For advanced configuration, you can access the phone's web grænseflade ved at indtaste dens IP-adresse i en web browser on a computer connected to the same network. The IP address can usually be found in the phone's network settings menu.
4. Betjeningsvejledning
4.1. Foretage opkald
- Løft håndsættet: Lift the handset or press the speakerphone button to get a dial tone.
- Opkaldsnummer: Indtast det ønskede telefonnummer ved hjælp af tastaturet.
- Start opkald: Tryk på Ring button (often a green phone icon) or wait a few seconds for the call to automatically initiate.
4.2. Modtagelse af opkald
When an incoming call is received, the phone will ring and the display will show caller ID information.
- Besvar opkald: Lift the handset or press the speakerphone button to answer the call.
- Afvis opkald: Tryk på Afvise button (often a red phone icon) to decline the call.
4.3. Using Programmable Function Keys
The Snom IP 710 features 5 programmable function keys, typically located on the side of the display. These keys can be configured for various functions such as speed dial, busy lamp field (BLF), call park, or line appearance. Refer to your system administrator for specific configurations.
4.4. Skærmnavigation
Use the navigation cluster (up, down, left, right arrows, and OK button) to navigate through menus, contacts, and call history on the backlit display.
5. Vedligeholdelse
5.1. Rensning
Sådan bevarer du telefonens udseende og funktionalitet:
- Tør telefonens overflade af med en blød kludamp, fnugfri klud.
- Brug ikke slibende rengøringsmidler, voks eller opløsningsmidler.
- Sørg for, at telefonen er frakoblet strømmen, inden den rengøres.
5.2. Softwareopdateringer
Periodically, Snom may release firmware updates to improve performance or add new features. These updates are typically managed by your system administrator. Do not attempt to update the firmware yourself unless instructed by your administrator or Snom support.
6. Fejlfinding
This section addresses common issues you might encounter with your Snom IP 710 Phone.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Telefonen tænder ikke. | Ingen strøm fra PoE eller strømadapter. | Check Ethernet cable connection to PoE switch. Verify power adapter is securely plugged into phone and wall outlet. |
| Ingen klartone. | Phone not registered with SIP server; network issue. | Check network cable. Verify SIP registration status on the display. Contact your system administrator if registration fails. |
| Kan ikke høre den, der ringer op / Den, der ringer op, kan ikke høre mig. | Handset/speaker volume too low; faulty handset cord; network quality issue. | Adjust volume. Ensure handset cord is securely connected. Test with speakerphone. Check network connection quality. |
| Skærmen er tom eller frosset. | Softwarefejl; strømproblem. | Unplug the phone from power for 10 seconds, then plug it back in to restart. If the issue persists, contact support. |
For more complex issues, please consult your IT department or Snom technical support.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 2793 |
| Produktmål (L x B x H) | 10.8 x 9.8 x 3.8 tommer |
| Varens vægt | 2.6 pund |
| Farve | Sort |
| Vise | 4 Line Backlit B/W Display |
| SIP Identities | 4 |
| Programmerbare nøgler | 5 |
| Strømkilde | Ledningsbaseret elektrisk (understøtter PoE) |
| Kompatible enheder | VoIP services, SIP-based systems and networks |
| Mulighed for telefonmøder | Grundlæggende |
| Første ledige dato | 30. november 2012 |
8. Garanti og support
For warranty information, please refer to the documentation provided at the time of purchase or visit the official Snom website. Snom products typically come with a limited manufacturer's warranty.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding advanced features and system integration, please contact your IT administrator or Snom customer support directly. You can usually find support contact details on the Snom official webwebsted.
