Brugermanual til Intermatic Mekanisk Timer

Indledning

This manual provides detailed instructions for the safe and efficient operation of your Intermatic Mechanical Timer, Model B00AAIM0D2. This heavy-duty, 20-amp, 240-volt timer is designed for general purpose applications, including lighting systems. Please read this manual thoroughly before installation and use to ensure proper function and to prevent damage or injury.

Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for brand, elektrisk stød eller personskade:

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til afbryderen eller sikringsboksen før installation eller service.
This device is intended for indoor use only, unless specifically rated for outdoor use.
Overskrid ikke den maksimale elektriske kapacitet på 20 amps, 240 volts, or 5000 watts.
Ensure the timer is properly grounded. It possesses a grounded 240V plug and receptacle.
Nedsænk ikke timeren i vand, og udsæt den ikke for overdreven fugtighed.
Opbevares utilgængeligt for børn.
If the timer appears damaged, do not use it. Contact qualified service personnel.

Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

Intermatic Mechanical Timer Unit (Model B00AAIM0D2)
Two "ON" trippers
Two "OFF" trippers
Brugervejledning (dette dokument)

Figur 1: Forside view of the Intermatic Mechanical Timer, showing the dial and trippers.

Opsætning og installation

Vælg en placering: Select a dry, protected location near a 240V grounded outlet. Ensure the location is free from excessive heat, cold, or moisture.
Montering (valgfrit): If permanent mounting is desired, use appropriate screws and anchors (not included) to secure the timer to a wall or surface. Ensure it is mounted securely to prevent accidental dislodgement.
Tilslut strøm: Plug the timer's grounded 240V plug into a compatible 240V grounded receptacle.
Tilslut apparat: Plug the appliance or device you wish to control into the timer's 240V receptacle. Ensure the appliance's power requirements do not exceed the timer's 5000-watt maximum capacity.

Betjeningsvejledning

Indstilling af den aktuelle tid

Rotate the timer dial clockwise until the current time aligns with the arrow indicator on the timer's face. The dial is marked with 24 hours (1-24) and AM/PM indicators.

Indstilling af tænd/sluk-tider

The timer comes with four trippers: two "ON" (red) and two "OFF" (black). These trippers are inserted into the slots around the dial to set the desired operating schedule.

Insert "ON" Tripper: Locate the time on the dial when you want the connected appliance to turn ON. Insert an "ON" (red) tripper into the corresponding slot on the outer edge of the dial.
Insert "OFF" Tripper: Locate the time on the dial when you want the connected appliance to turn OFF. Insert an "OFF" (black) tripper into the corresponding slot on the outer edge of the dial.
Repeat for additional ON/OFF cycles as needed. The timer supports multiple cycles within a 24-hour period.

Manuel tilsidesættelseskontakt

The timer features a manual override ON/OFF switch, typically located on the side or front of the unit. This switch allows you to manually turn the connected appliance ON or OFF, overriding the set program without disturbing the timer's settings. The timer will resume its programmed schedule at the next scheduled ON or OFF event.

Opretholdelse

The Intermatic Mechanical Timer requires minimal maintenance. Follow these guidelines to ensure longevity:

Rensning: Disconnect power before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Inspektion: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and have the unit serviced by a qualified technician.
Opbevaring: If storing the timer for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.

Fejlfinding

Problem	Mulig årsag	Løsning
Apparatet tænder/slukker ikke på de programmerede tidspunkter.	Forkert tidsindstilling. Trippers not correctly placed. Manual override switch engaged. Ingen strøm til timeren.	Verify the current time is set accurately. Ensure "ON" and "OFF" trippers are firmly inserted at the desired times. Check the manual override switch position. Verify the timer is plugged into a live 240V outlet and the circuit breaker is ON.
Timerknappen drejer ikke.	Ingen strøm til timeren. Intern funktionsfejl.	Kontroller strømtilslutning og afbryder. If power is present and the dial still doesn't rotate, the unit may require service.
Appliance remains ON or OFF constantly.	Missing "ON" or "OFF" tripper. Manual override switch engaged.	Ensure both "ON" and "OFF" trippers are installed for each desired cycle. Check the manual override switch position.

Specifikationer

Model: B00AAIM0D2
Mærke: Intermatic
Elektrisk vurdering: 20 Amps, 240 Volts, 60 Hz
Maksimal kapacitet: 5000 watt
Stiktype: Grounded 240V
Beholdertype: Grounded 240V
Cykler: Up to 24 hours, multiple ON/OFF cycles per day
Trippers Included: 2 TIL, 2 FRA
Manuel tilsidesættelse: Ja
UPC: 078275001374

Garanti og support

For warranty information or technical support, please contact Intermatic directly. Refer to the official Intermatic webwebstedet eller produktemballagen for at få de seneste kontaktoplysninger og garantivilkår.

Fabrikant: Intermatic

For yderligere hjælp kan du også besøge Intermatic-butik på Amazon.

	Installations- og programmeringsvejledning til Intermatic EJ341C/EJ343C belysningstimer Detaljerede instruktioner til installation og programmering af Intermatic EJ341C (enkeltpolet) og EJ343C (trevejs) belysningstimerkontakter. Dækker opsætning, styring, programmeringsmetoder, fejlfinding og specifikationer.
	Intermatic EI200 elektronisk nedtællingstimer til vægmontering Installations- og betjeningsvejledning Detaljeret vejledning til installation og betjening af den elektroniske vægindbyggede nedtællingstimer Intermatic EI200. Funktionerne omfatter tidsintervaller på 5-30 minutter, kontinuerlig HOLD-tilstand og klassificeringer for 15A universalmotorer, 1000W wolframmotorer og 1/4 HK-motorer. Indeholder garantioplysninger.
	Intermatic EI210 Elektronisk Nedtællingstimer til Indbygning i Væg - Installations- og Brugervejledning Omfattende guide til den elektroniske vægindbyggede nedtællingstimer Intermatic EI210, med detaljerede funktioner, installationstrin, driftstilstande (Timer og Hold) og garantioplysninger. Indeholder tekniske specifikationer og kontaktoplysninger for Intermatic Incorporated.
	Intermatic T173 T170 Mekanisk timerafbryder - 24 timer, 125V, 5HK Detaljerede specifikationer for Intermatic T173 T170 mekanisk timerafbryder. Har 24-timers indstilling, 125 VAC, 5 HK motoreffekt, 2NO DPST-kontakter og NEMA 1-kapsling. Velegnet til kommercielle, industrielle, private, udendørs og HVACR-applikationer.
	Intermatic T100-seriens timer: Betjenings- og indstillingsvejledning En omfattende vejledning i betjening, indstilling og fejlfinding af mekaniske timere i Intermatic T100-serien, inklusive sikkerhedsinstruktioner, komponentbeskrivelser og supportressourcer.
	Intermatic TN311 Timer Brugermanual og Garanti Brugervejledning og information om et års begrænset garanti til Intermatic TN311 timeren til kraftig jordet stikkontakt. Lær, hvordan du indstiller programmet, klokkeslættet og den automatiske overstyring.

Intermatic B00AAIM0D2