DB Electrical Alternator User Manual

Indledning

This manual provides essential information for the installation, operation, and maintenance of your DB Electrical 400-48170 Alternator. Please read this manual thoroughly before installation to ensure proper function and safety. This alternator is designed as a direct replacement for specific Honda Fit models.

Produktspecifikationer

Figur 1: Forside view of the DB Electrical 400-48170 Alternator, showing the pulley and cooling fins.

Kompatibilitet

This DB Electrical Alternator, model 400-48170, is compatible with the following vehicle models:

• HONDA FIT: 2009, 2010, 2011, 2012, 2013 (1.5L engines)

It replaces the following OEM part numbers:

• ARROWHEAD: 400-48170, AMT0233
• ARROWHEAD (OEM): VMT0233, A5TJ0091
• HONDA: 31100-RB0-004, 31100-RB0-0041, 31100-RB0A-0243, AHGA77
• J & N: 400-48170, 400-48249
• LESTER: 11410
• MITSUBISHI: A5TJ0091
• REMY LIGHT DUTY: 12948
• VICTORY INDUSTRIAL CORP.: VMN10951001N-A

Always verify part fitment with your vehicle's specific year, make, and model before installation.

Sikkerhedsoplysninger

Det kan være farligt at arbejde med bilers elektriske systemer. Overhold altid følgende sikkerhedsforanstaltninger:

• Disconnect the vehicle's battery (negative terminal first) before beginning any work on the electrical system.
• Brug passende personlige værnemidler (PPE), herunder sikkerhedsbriller og handsker.
• Sørg for, at køretøjet er sikkert understøttet på donkrafte, hvis du arbejder under det.
• Allow the engine to cool completely before working on engine components.
• Consult a professional mechanic if you are unsure about any step of the installation process.
• Hold alt værktøj og arbejdsområder rene og fri for snavs.

Installationsvejledning

This section outlines the general steps for replacing an alternator. Specific procedures may vary by vehicle model. Refer to your vehicle's service manual for detailed instructions.

Nødvendige værktøjer og materialer:

• Topnøglesæt
• Open-ende nøglesæt
• Momentnøgle
• Pry bar (optional, for belt tension)
• Batteripolrenser
• New serpentine belt (recommended)

Trin-for-trin installation:

1. Klargør køretøjet:

   Park the vehicle on a level surface and engage the parking brake. Allow the engine to cool down. Disconnect the negative (-) battery terminal first, then the positive (+) terminal. This prevents accidental short circuits.
2. Adgang til generatoren:

   Depending on your vehicle, you may need to remove other components (e.g., air intake, splash shields) to gain access to the alternator. Identify the alternator's location.

   

   Figur 2: Side view of the alternator, showing the mounting points and electrical connections.

3. Remove the Serpentine Belt:

   Locate the serpentine belt tensioner. Use a wrench or socket to release the tension on the belt and carefully remove the belt from the alternator pulley. Note the belt routing for reinstallation.
4. Disconnect Electrical Connections:

   Disconnect the main power wire (usually a large cable with a nut) and any smaller electrical connectors from the back of the alternator. Be careful not to damage the terminals.

   

   Figur 3: Bagside view of the alternator, highlighting the electrical connector and mounting bracket.

5. Fjern monteringsboltene:

   Unbolt the alternator from its mounting brackets. There are typically two or three mounting bolts. Support the alternator as you remove the last bolt to prevent it from falling.
6. Install the New Alternator:

   Position the new DB Electrical alternator into place and loosely install the mounting bolts. Ensure proper alignment before tightening the bolts to the manufacturer's specified torque. Do not overtighten.

   

   Figur 4: Vinklet bagside view, showing the overall compact design and mounting points.

7. Gentilslut elektriske forbindelser:

   Reconnect all electrical connectors and the main power wire. Ensure all connections are clean and secure. Use battery terminal cleaner if necessary.
8. Reinstall Serpentine Belt:

   Route the serpentine belt correctly around all pulleys, including the alternator pulley. Use the tensioner to apply tension to the belt. Double-check that the belt is seated properly on all grooves.

9. Sidste trin:

   Reinstall any components removed for access. Reconnect the positive (+) battery terminal first, then the negative (-) terminal. Start the vehicle and check for proper charging system operation (e.g., battery light off, voltage reading around 13.5-14.5V).

Operation

Once installed, the alternator operates automatically to generate electrical power for the vehicle's systems and recharge the battery. It is driven by the engine's serpentine belt.

Normal drift:

• The battery warning light on your dashboard should turn off shortly after the engine starts.
• A voltmeter should show a reading of approximately 13.5 to 14.5 volts across the battery terminals when the engine is running.
• There should be no unusual noises (e.g., grinding, squealing) coming from the alternator area.

Opretholdelse

Alternators are generally low-maintenance components. However, regular checks of related systems can prolong its life and ensure optimal performance.

• Slangebælte: Inspect the serpentine belt regularly for cracks, fraying, or excessive wear. Replace it if necessary. Ensure proper belt tension.
• Batteriterminaler: Keep battery terminals clean and free of corrosion. Corroded terminals can impede proper charging.
• Elektriske forbindelser: Periodically check all electrical connections to the alternator for tightness and corrosion.
• Batteriets sundhed: A weak or failing battery can put undue strain on the alternator. Ensure your vehicle's battery is in good condition.

Fejlfinding

If you experience issues with your vehicle's charging system, consider the following common problems and solutions:

Hvis fejlfindingstrinene ikke løser problemet, anbefales det at kontakte en certificeret biltekniker.

Garanti og support

DB Electrical provides a 1 års garanti on this alternator from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

If you encounter any issues with your product within the warranty period, please contact DB Electrical customer support. They are committed to assisting you and will facilitate a replacement if the product does not perform as expected.

For support, se venligst de kontaktoplysninger, der fulgte med dit køb, eller besøg den officielle DB Electrical website. Ensure you have your purchase details and product model number (400-48170) ready when contacting support.

For more information about DB Electrical products, you can visit their store: DB Electrical Store on Amazon.